Candy CSOE H9A2DE-80 User manual

EN

!

2

Thank you for choosing this product.

We are proud to offer the ideal product for

you and the best complete range of home

appliances for your daily routine.

Please read and follow these

instructions carefully and operate the

machine accordingly. This booklet provides

important guidelines for safe use,

installation, maintenance and some useful

advice for best results when using your

machine. Keep all documentation in a safe

place for future reference or for any future

owners.

Please check that the following items are

delivered with the appliance:

• Instruction manual

• Guarantee card

• Energy label

Check that no damage has occurred to the

machine during transit. If it as, call for

service by Customer Service Centre.

Failure to comply with the above can

compromise the safety of the appliance.

You may be charged for a service call if a

problem with your machine is caused by

misuse or by incorrect installation.

To contact the Service, ensure that you

have the unique 16-character code

available, also called the "serial number".

This code is a unique code for your

product, printed on the sticker that can be

found inside the door opening.

WEEE contains both polluting substances (which

can cause negative consequences for the

environment) and basic components (which can

be re-used). It is important to have WEEE

subjected to specific treatments, in order to

remove and dispose properly all pollutants, and

recover and recycle all materials. Individuals can

play an important role in ensuring that WEEE

does not become an environmental issue; it is

essential to follow some basic rules:

l WEEE should not be treated as household

waste;

l WEEE should be handed over to the relevant

collection points managed by the municipality or

by registered companies. In many countries, for

large WEEE, home collection could be present.

In many countries, when you buy a new

appliance, the old one may be returned to the

retailer who has to collect it free of charge on a

one-to-one basis, as long as the equipment is of

equivalent type and has the same functions as

the supplied equipment.

1. GENERAL SAFETY RULES

2. DRAIN HOSE KIT

3. WATER CONTAINERS

4. DOOR AND FILTERS

5. PRACTICAL HINTS

6. REMOTE CONTROL (WI-FI)

7. QUICK USER GUIDE

8. CONTROLS AND PROGRAMMES

9.

TROUBLESHOOTING AND WARRANTY

This appliance is marked according to

the European directive 2012/19/EU

on Waste Electrical and Electronic

Equipment (WEEE).

Contents

Environmental conditions

!

EN

3

1. GENERAL SAFETY

RULES

l This appliance is intended to

be used in household and

similar applications such as:

- Staff kitchen areas in shops, offices

and other working environments;

- Farm houses;

- By clients in hotels, motels and

other residential type environments;

- Bed and breakfast type environments.

A different use of this appliance

from household environment

or from typical housekeeping

functions, as commercial use by

expert or trained users, is excluded

even in the above applications. If

the appliance is used in a manner

inconsistent with this it may reduce

the life of the appliance and may

void the manufacturer’s warranty.

Any damage to the appliance or

other damage or loss arising

through use that is not consistent

with domestic or household use

(even if located in a domestic or

household environment) shall not

be accepted by the manufacturer to

the fullest extent permitted by law.

l This appliance can be used by

children aged from 8 years and

above and persons with reduced

physical, sensory or mental

capabilities or lack of experience

and knowledge if they have been

given supervision or instruction

concerning use of the appliance

in a safe way and understand the

hazards involved.

Children shall not play with the

appliance. Cleaning and user

maintenance shall not be made

by children without supervision.

l Children should be supervised

to ensure that they do not play

with the appliance.

l Children of less than 3 years

should be kept away unless

continuously supervised.

l This machine is solely for

domestic use, i.e. to dry

household textiles and garments.

l Ensure that the instructions for

installation and use are fully

understood before operating

the appliance.

l Do not touch the appliance

when hands or feet are damp

or wet.

l Do not lean on the door when

loading the machine or use the

door to lift or move the machine.

l Do not continue to use this

machine if it appears to be faulty.

WARNING

Misuse of a tumble dryer may

create a fire hazard.

!

4

l The tumble dryer is not to be

used if industrial chemicals

have been used for cleaning.

l

Lint and fluff must not be allowed

to collect on the floor around the

outside of the machine.

l Always remove the plug before

cleaning the appliance.

l The drum inside may be very

hot. Always allow the dryer to

complete the cool down period

before removing the laundry.

l The final part of a tumble dryer

cycle occurs without heat (cool

down cycle) to ensure that the

items are left at a temperature

that ensures that the items will

not be damaged.

WARNING

Do not use the product if the

fluff filter is not in position or

is damaged; fluff could be

ignited.

WARNING:

Where the hot surface

symbol is located the

temperature rise during

operation of the tumble

dryer may be in excess of 60

degrees C.

WARNING

Never stop a tumble dryer

before the end of the drying

cycle unless all items are

quickly removed and spread

out so that the heat is

dissipated.

WARNING

During transport ensure

that

the dryer is in an upright

position, if it's necessary

you can only flip in the side

shown.

If the product is in different

side, wait at least 4 hours

before switching on so that

the oil can flow back into the

compressor. Failure to do

this could result in damage

to the compressor.

!

EN

5

l Do not install the product in a

low temperature room or in a

room where there is a risk of

frost occurring. At temperature

around freezing point the

product may not be able to

operate properly: there is a risk

of damage if the water is

allowed to freeze in the

hydraulic circuit (valves, hoses,

pumps). For a better product

performance the ambient room

temperature must be between

5-35°C. Please note that

operating in cold condition

(between +2 and +5°C) might

simply some water condensation

and water drops on floor.

l In cases where the dryer is

installed on top of a washing

machine, a suitable stacking kit

must be used according to the

configuration of your appliance:

- Stacking kit "standard size":

for

washing machine with

minimum depth of 44 cm;

- Stacking kit "slim size":

for

washing machine with

minimum depth of 40 cm.

- Universal stacking kit with

sliding: for washing machine

with minimum depth of

47 cm.

The stacking kit shall be

obtainable from service. The

instructions for installation and

any fixing attachments, are

provided with the stacking kit.

l NEVER install the dryer up

near curtains.

l The appliance must not be

installed behind a lockable door,

a sliding door or a door with a

hinge on the opposite side to

that of the tumble dryer, in

such way that a full opening of

the tumble dryer door is restricted.

l For your safety, the appliance

must be correctly installed. If

there is any doubt about installation,

call Service for advice.

l Once the machine is in place

the feet should be adjusted to

ensure that the machine is

level.

l The technical details (supply

voltage and power input) are

indicated on the product rating

plate.

Installation

Electrical connections and

safety instructions

!

6

l Make sure that the electrical

system is earthed, complies

with all applicable law and that

the (electricity) socket is

compatible with the plug of the

appliance. Otherwise, seek

qualified professional assistance.

l Do not use adapters, multiple

connectors and/or extensions.

l The plug should be accessible

for disconnection after the

appliance has been installed.

l Do not plug the machine in and

switch it on at the mains until

the installation is completed.

l If the supply cord is damaged,

it must be replaced

by the

manufacturer, its service

agent

or similarly qualified persons in

order to avoid a hazard.

l Adequate ventilation must be

provided in the room where the

tumble dryer is located to

prevent gases from appliances

burning other fuels, including

open fires, being drawn into

the room during operation of

the tumble dryer.

l Install the rear of the appliance

close to a wall or vertical surface.

l There should be a gap of at

least 12 mm between the

machine and any obstrubtions.

The inlet and outlet air should

be kept clear of obstruction.

l Make sure carpets or rugs

do not obstruct the base or any

of the ventilation openings.

l Prevent items from falling or

collecting behind the dryer as

these may obstruct the air inlet

and outlet.

l Exhaust air must not be

discharged into a flue which is

used for exhausting fumes

from appliances burning gas or

other fuels.

l Check regularly that the air

flowing around the dryer is not

restricted, avoiding accumulation

of dust and lint.

WARNING

The appliance must not be

supplied through an external

switching device, such as a

timer, or connected to a circuit

that is regularly switched on

and off by a utility.

Ventilation

!

EN

7

l Check frequently the fluff filter

after use, and clean, if necessary.

l Always refer to the laundry

care labels for directions on

suitability for drying.

l Fabric softeners, or similar

products, should be used as

specified by the fabric softener

instructions.

l Do not dry unwashed items in

the tumble dryer.

l Clothes should be spin dried or

thoroughly wrung before they

are put into the tumble dryer.

l Clothes that are dripping wet

should not be put into the dryer.

l Glass fibre curtains should

NEVER be put in this machine.

Skin irritation may occur if

other

garments are contaminated

with

the glass fibres.

l Items that have been soiled

with substances such as cooking

oil, acetone, alcohol, petrol,

kerosene, spot removers,

turpentine, waxes and wax

removers should be washed in

hot water with an extra amount

of detergent before being dried

in the tumble dryer.

l

Remove all objects from pockets

such as lighters and matches.

l Lighters and matches must not

be left in pockets and NEVER

use flammable liquids near the

machine.

l Maximum load drying weight:

see energy label.

l

To consult the product technical

specification please refer to the

manufacturer website.

The Laundry

WARNING

Foam rubber materials can

,

under certain circumstances,

when heated become ignited

by spontaneous combustion.

Items such as foam rubber

(latex foam), shower caps,

waterproof textiles, rubber

backed articles and clothes

or pillows fitted with foam

rubber pads MUST NOT be

dried in the tumble dryer.

WARNING

Do not tumble dry fabrics

treated with dry cleaning

fluids.

!

8

WARNING

Fire hazard / Flammable

materials.

l The appliance contains R290,

an eco-sustainable refrigerating

gas that is flammable. Keep

open flames and sources of

ignition away from the appliance.

l Check there is no visible

damage on the appliance. Do

not use the appliance if it is

damaged.

l Should there be any kind of

problem, please contact your

specialised retailer or one of

our customer support centres.

WARNING

Ensure that the openings on

the appliance and the openings

of the compartment the appliance

is fitted in (for built-in models)

are clear of obstructions.

WARNING

Do not damage the refrigerating

circuit.

l Any repairs or interventions on

the appliance must be carried

out only by an authorised

assistance service.

l Disposing of the device

incorrectly could cause fires or

poisoning.

l Dispose of the device correctly

and do not damage the pipes

used for the circulation of the

refrigerating fluid.

!

EN

9

2. DRAIN HOSE KIT

In order to avoid to empty the water

container after each drying cycle, the water

can be discharged directly to a waste water

drain pipe. Water Bye-Laws prohibit

connection to a surface water drain. The

waste water drain pipe should be located

adjacent to the tumble dryer.

The kit consists of: 1 hose and 1 bung.

1. The water drainage system is located at

the back of the machine on the lower

right side (figure 2).

2. Disconnect the hose (A) from the fitting

(B) by pulling it upwards (figure 3).

3. Close the extracted tube with the cap

(C) supplied with the kit (figure 4).

4. Connect the hose into the fitting (B)

making sure it is inserted securely

(figures 5-6).

B

A

C

1

2

3

4

5

6

WARNING

Switch off and remove the tumble

dryer plug from the electricity supply

before carrying out any work.

The hose must be connected to a

drain system with a maximum height

of 85 cm compared to the base of the

dryer (figure 1).

Fitting the drain hose

Once the machine is in place, check to

ensure that the new hose does not

kink when pushing the tumble dryer

into position.

!

10

3. WATER CONTAINERS

The water removed from the laundry during

the drying cycle is collected in a container.

When the container is full, an indicator light,

or on some models a message on the

display, will advise you that it MUST be

emptied (however, we recommend to empty

it after each drying cycle).

1. Gently pull out the water container

holding the handle (A).

When it is full the water container will

weigh about 6 kg.

2. Tilt the water container to empty the

water out through the spout (B).

When empty, replace the water container

back as shown; (C) first insert the base of

the container into position as shown (1)

then gentle push the top into position (2).

3. Press the programme start button to

restart the cycle.

AB

1C

*Depending on model

1. Gently pull the top of the kickplate so

that it unclips from the dryer. The bottom

section can then be unhinged allowing

the kickplate to be completely removed (A).

2. Pull firmly on the handgrip and slide the

water container out of the dryer (B).

Support the container with both hands

(C). When full, the water container will

weigh about 4 kg.

3. Open the lid located on the top of the

container and empty the water at the end

of each drying cycle and before starting

the next one (D).

4. Refit the lid and slide the water container

back into position (D). PUSH FIRMLY

INTO PLACE.

5. Refit the kickplate by engaging the

hinges at the top and 'snapping' the lower

clips into place.

*Depending on model

Very little water will collect during the

first few cycles of a new machine as an

internal reservoir is filled first.

To remove the container tank in

door drawer *

ONLY FOR MODELS WITH DRAIN

HOSE KIT

If you have the option of drainage

near to the dryer you can use the

discharge kit to provide a permanent

drainage for the water collected in the

container of the dryer. This means

that you don't have to empty the water

container.

To remove the container bottom

water drawer *

!

EN

11

4. DOOR AND FILTERS

l Pull on handle to open the door.

l To restart the appliance, close the door

and press the programme start button.

Lint filters and sponge filter cleaning

indicator light

The indicator light illuminates in fixed mode

to signal the need of cleaning the lint filters

and in blinking mode to signal the need of

cleaning the sponge filter

.

If the laundry is not drying check that the

filters are not clogged.

Door

WARNING

When the tumble dryer is in use the

drum and door may be VERY HOT.

WARNING

(For models with water collection tray)

If you open the door mid cycle, before

the cool-down cycle has completed,

the handle may be hot. Please use

extreme caution when attempting to

empty the water reservoir during the

cycle.

Filters

Clogged filters could increase the

drying time and cause damages and

expensive cleaning operation.

In order to have the maximum

effectiveness of the machine,

checking the cleanliness of all filters

before each drying cycle is essential.

WARNING

Do not use the tumble dryer without

the filters.

.

If you clean filters under water, remember

to dry them.

!

12

1. Extract the two filters A and B in

sequence pulling them upwards, as

shown in the figure.

AB

2. Open the filters.

AB

3. Gently remove lints from both filters using

your fingertips or a soft brush, a cloth or

under water running.

AB

4. Close both filters by repositioning them

inside the door, making sure they are

positioned correctly in place.

AB

B A

To clean the lint filters

WARNING

Before reinserting the filters, make

sure there is no lint residue inside the

compartment; if not, remove it with a

vacuum cleaner.

WARNING

Clean the lint filters before every cycle.

!

EN

13

1. Remove the kickplate.

2. Turn the handle anti-clockwise and pull

out the front cover.

1

2

3. Gently remove the sponge filter frame.

3

4. Gently remove the sponge from the

frame.

4

5. Wash the sponge by holding it under a

running tap turning it so to remove any

dust or fluff. Wring out the sponge and

refit it carefully on the frame.

5

6. Refit the sponge filter frame ensuring that

it is in the correct position.

6

7. Refit the front cover ensuring it is in the

right position. Turn the handle clockwise

to lock the front cover.

8. Refit the kickplate.

7

8

To clean the sponge filter

WARNING

Do not touch the fins behind the

sponge filter frame with hands in order

to avoid injury.

WARNING

Clean the sponge filter every six

months or when the filters cleaning

indicator light blinks.

!

14

5. PRACTICAL HINTS

Before using the tumble dryer for the first

time:

l Please read this instruction book

thoroughly.

l Remove all items packed inside drum.

l Wipe the inside of the drum and door with

a damp cloth to remove any dust which

may have settled in transit.

Make sure that the laundry you are going to

dry is suitable for drying in a tumble dryer,

as shown by the care symbols on each

item. Check that all fastenings are closed

and that pockets are empty. Turn the

articles inside out. Place clothes loosely in

the drum to make sure that they don't get

tangled.

Silk, nylon stockings, delicate embroidery,

fabrics with metallic decorations, garments

with PVC or leather trimmings.

Only put into the tumble dryer laundry which

has been thoroughly wrung or spin-dried.

The drier the laundry the shorter the drying

time thus saving electricity.

ALWAYS

l Check that the filters are clean before

every drying cycle.

NEVER

l Put dripping wet items into the tumble

dryer, this may damage the appliance.

l By care symbols

These can be found on the collar or inside

seam:

Suitable for tumble drying.

Tumble drying at high temperature.

Tumble drying at low temperature

only.

Do not tumble dry.

If the item does not have a care label it

must be assumed that it is not suitable for

tumble drying.

l By amount and thickness

Whenever the load is bigger than the dryer

capacity, separate clothes according to

thickness (e.g. towels from thin underwear).

l By type of fabric

Cottons/linen: Towels, cotton jersey, bed

and table linen.

Synthetics: Blouses, shirts, overalls, etc.

made of polyester or polyamid, as well as

for cotton/synthetic mixes.

Clothes preparation

Do not tumble dry

WARNING

Do not dry articles which have been

treated with a dry cleaning fluid or

rubber clothes (danger of fire or

explosion).

During the last 15 minutes the load is

always tumbled in cool air.

Energy saving

Sort the load as follows

WARNING

Do not overload the drum, large items

when wet exceed the maximum

admissible clothes load (for example:

sleeping bags, duvets).

!

EN

15

l Clean the lint filters after every drying cycle.

l In models equipped with a water

collection tray, the tray should be emptied

after every drying cycle.

l After each period of use, wipe the inside

of the drum and leave the door open for a

while to allow circulation of air to dry it.

l Wipe the outside of the machine and the

door with a soft cloth.

l DO NOT use abrasive pads or cleaning

agents.

l To prevent the door sticking or the

buildup of fluff clean the inner door and

gasket with a damp cloth after every

drying cycle.

Cleaning the dryer

WARNING

The drum, door and load may be very

hot.

WARNING

Always switch off and remove the plug

from the electricity supply before

cleaning this appliance.

WARNING

For electrical data refer to the rating

label on the front of the dryer cabinet

(with the door open).

!

16

6. REMOTE CONTROL (WI-FI)

This appliance is equipped with Wi-Fi

technology that allows you to control it

remotely via App.

APPLIANCE PAIRING (ON APP)

l Download the hOn App on your device by

framing the following QR code:

or by the link:

go.haier-europe.com/download-app

l Open the App, create the user profile

(or log-in if it is already created previously)

and pairing the appliance following the

instructions on the device display.

TO ENABLE REMOTE CONTROL

l Check that the router is switched on and

connected to the Internet.

l Load the laundry and close the door.

l Turn the programme selector to the

REMOTE CONTROL (Wi-Fi) position :

the controls on the control panel will be

disabled.

l Start the cycle using the app. When the

cycle has been completed, turn off the

machine by turning the programme

selector to the OFF position.

TO DISABLE REMOTE CONTROL

l To exit REMOTE CONTROL mode while

a cycle is underway, turn the programme

selector to any position other than

REMOTE CONTROL (Wi-Fi), without

going through the OFF. The control

panel on the appliance will be operative

once again.

l With the door closed, turn the programme

selector to the REMOTE CONTROL (Wi-

Fi) position to control the appliance using

the app once again. If there is a cycle

underway, it will continue.

The App is available for devices

running both Android and iOS, both

for tablets and for smartphones.

Get all the details of the Wi-Fi

functions by browsing the App in

DEMO mode.

The frequency of the home Wi-Fi

network has to be set on the 2.4 GHz

band. You can not configure the

machine if your home network is set

to the 5 GHz band.

With the door opened, the REMOTE

CONTROL will be disabled. To enable

it again, close the door, turn the

programme selector to any position

other than REMOTE CONTROL and

then select it again.

!

EN

17

7. QUICK USER GUIDE

1. Open the door and load the drum with

laundry. Ensure that garments do not

hinder closure of the door.

2. Gently close the door pushing it slowly

until you hear the door 'click' shut.

3. Select the desired drying programme by

turning the programme knob or, in some

models, by pressing the specific button

(check the programme table for specific

details).

4. Press the programme start button. The

dryer will start automatically.

5. If the door is opened during the

programme to check the laundry, it is

necessary to press programme start

to recommence drying after the door

has been closed.

6. When the cycle is nearing completion

the machine will enter the cool down

phase, the clothes will be tumbled in

cool air allowing the load to cool down.

7. Following the completion of the cycle

the drum will rotate intermittently to

minimize creasing. This will continue

until the machine is switched OFF or the

door is opened.

Power input / Power current fuse amp/

Supply voltage: see rating plate.

Maximum load: see energy label.

Energy class: see energy label.

8. CONTROLS AND

PROGRAMMES

A

FG

C

DEB

H

A

PROGRAMME SELECTOR with

OFF position

B

START/PAUSE button

C

DELAY START button

D

TIME CYCLE SELECTION button

E

MEMO button

F

DRYING SELECTION button

G

SUPER EASY IRON button

H

DISPLAY

C+F

CHILD LOCK

Do not open the door during the

automatic programmes in order to

obtain a proper drying.

Technical data

!

18

l Rotating the programme selector in both

directions it's possible to select the

desired drying programme.

l To cancel the selections or switch off the

appliance rotate the programme selector

on OFF (remember to unplug the appliance).

l To start the selected cycle with the preset

parameters, press START/PAUSE. When

the programme is running, the display will

show the time to elapse.

l Moreover, if you want to modify the

chosen programme, press the desired

options buttons, modify the default

parameters and then press START/

PAUSE button to start the cycle.

l After switching on the appliance, wait a few

seconds for the programme to start running.

PROGRAMME DURATION

l When a programme is selected the

display automatically shows the cycle

duration, which can vary, depending on

the options selected.

l Once the programme has started you will

be kept informed constantly of the time

remaining to the end of the drying cycle.

l The appliance calculates the time to the

end of the selected programme based

upon a standard loading, during the cycle,

the appliance corrects the time to the

humidity level of the load.

PROGRAMME END

l "END" ("End" on some models) will

appear in the display at the end of the

programme, it is now possible to open the

door.

l At the end of the cycle, turn off the

appliance by turning the programme

selector to the OFF position.

PAUSING THE MACHINE

l Keep the START/PAUSE button pressed

for about 2 seconds (the residual time

display will flash, showing that the

machine is paused).

l Press the START/PAUSE button again to

re-start the programme from the point it

had been paused at.

CANCELLING THE SET PROGRAMME

l To cancel the programme, turn the

programme selector to the OFF position.

If there is a break in the power supply

whilst the machine is operating, when

the power is restored, by pressing the

START/PAUSE button, the machine will

restart from the beginning of the phase it

was in when the power was lost.

WARNING

Don’t touch the buttons while inserting

the plug because the machines

calibrates the systems during the first

seconds: touching the buttons, the

machine couldn’t work property. In

this case, remove the plug and repeat

the operation.

PROGRAMME SELECTOR with

OFF position

START/PAUSE button

Close the porthole BEFORE pressing

the START/PAUSE button.

Only the options compatible with the

set programme can be selected.

The programme selector must

ALWAYS be put in the OFF position at

the end of the drying cycle before a

new one can be selected.

!

EN

19

l This button allows to delay the start of the

programme from 30 minutes (1 hour on

some models) to 24 hours in 30 minutes

intervals (1 hour on some models).The

delay selected is shown on the display.

l After pressing the START/PAUSE button

the time showed decrease minute after

minute.

l It's possible transform a cycle from

automatic to programmed, up to 3

minutes after the start of the cycle.

l The progressive pressure increases the

time in 10 minute intervals. After this

selection to reset the automatic drying

functioning is necessary to switch off the

dryer.

l In case of incompatibility, all indicator

lights flash quickly for 3 times.

This button allows you to store the options

set on a cycle.

MEMORY:

select the programme and the desired

options, then press the button MEMO for 3

seconds (before starting the cycle). The

writing MEMO (all the digit on some

models) will blink for 2 seconds and the

options connected to the cycle selected will

be set.

RECALL:

after the selection of the cycle press the

button MEMO for recall the stored options

(not the cycle).

l This button allows to set the desired

dryness level editable option up to 3

minutes after the starting of the cycle:

Ready to Iron: it leaves the garments

slightly wet to facilitate ironing.

Dry Hanger: to get garment ready to

be hang.

Dry wardrobe: for laundry that can be

directly stored.

Extra-dry: to get completely dry

garments, ideal for full load.

l This appliances is equipped with Drying

Manager function. On automatic cycles,

each level of intermediate drying, prior to

the reaching the selected one, is indicated

by flashing the light indicator corresponding

to the degree of drying reached.

In case of incompatibility, all indicator

lights flash quickly for 3 times.

l During the cycle the option sets alternate

movements of the drum to reduce the

folds and automatically sets the drying

level to "Ready to Iron". Moreover this

option activate an anti-creases movement

of the drum pre cycle in case of activation

of the delay and at the end of drying

cycle. It is activated every 10 minutes, up

to 6 hours after the end of the drying

cycle.

l

To stop the movements set the programme

selector to OFF. Useful when it's not

possible to remove immediately the laundry.

l Pressing simultaneously the buttons "C"

and "F" for about 2 seconds, the

machine allows you to lock the keys. In

this way, you can avoid making accidental

or

unwanted changes if a button on the

display is pressed accidently during a cycle.

DELAY START button

Opening of the porthole with delayed

start set, after re-closing the porthole,

press start again to resume the counting.

TIME CYCLE SELECTION button

MEMO button

The delay start function can't be

memorized.

DRYING SELECTION button

SUPER EASY IRON button

CHILD LOCK

!

20

l The key lock can be simply cancelled by

pressing the two buttons simultaneously

again.

l In case of opening of porthole with

activated CHILD LOCK, the cycle stops

but the lock is kept: to restart the cycle,

you must remove the lock and press

START/PAUSE again.

l CHILD LOCK can be modified at any

time of the cycle.

The display shows the remaining time for

drying, the postponed time in case of

delayed start selection and other

notifications setting.

23

41

1) DRYING SELECTION INDICATOR

LIGHTS

The indicator lights display the degrees

of dryness that can be selected by the

relevant button.

2)

WATER CONTAINER INDICATOR LIGHT

It lights up when it’s necessary to empty the

condensate water tank.

3) LINT FILTERS AND SPONGE FILTER

CLEANING INDICATOR LIGHT

The indicator light illuminates in fixed mode

to signal the need of cleaning the lint filters

and in blinking mode to signal the need of

cleaning the sponge filter.

4) Wi-Fi INDICATOR LIGHT

l On models equipped with Wi-Fi, it

indicates the status of the connection. It

could be:

- FIXED ON: remote control enabled.

- SLOW FLASHING: remote control

disabled.

- QUICK FLASHING FOR 3 SECONDS,

THEN OFF: the machine cannot connect

to the home Wi-Fi network or has not yet

been associated with the App.

- SLOW BLINKING FOR 3 TIMES, THEN

OFF FOR 2 SECONDS: reset of the Wi-Fi

network (during the association with the App).

- ON FOR 1 SECOND, THEN OFF FOR 3

SECONDS: the door is open. Remote

control cannot be activated.

l For all the information about the

functionality and the instructions for an

easy configuration of the Wi-Fi, please

refer to:

go.he.services/ctd-3d

Display

Page is loading ...

Candy CSOE H9A2DE-80 User manual

This manual is also suitable for

Candy CSOE H9A2DE-80 User manual