Legrand Essentia E6G Operating instructions

Brand: Legrand

Model: Essentia E6G

Category: Supplementary music equipment

Type: Operating instructions

This manual is also suitable for

InstallationGuide

EssentiaNV-E6GMS-DC,NV-E6GMS-UK

ENGLISH

Danger

Exposure to extremely high noise levels may cause a permanent

hearing loss. Individuals vary considerably to noise induced hearing

loss but nearly everyone will lose some hearing if exposed to sufficiently

intense noise for a sufficient time. The U.S. Government's

Occupational Safety and Health Administration (OSHA) has specified

the following permissible noise level exposures:

According to OSHA, any exposure in the above permissible limits could

result in some hearing loss. Ear plugs or protectors in the ear canal or over

the ears must be worn when operating this amplification system in order to

prevent a permanent hearing loss. If exposure in excess of the limits as

put forth above, to insure against potentially harmful exposure to high

sound pressure levels, it is recommended that all persons exposed to

equipment capable of inducing high sound pressure levels, such as this

amplification system, be protected by hearing protectors while this unit is in

operation.

DURATION PER DAY (HOURS) 8 6 4 3 2 1

SOUND LEVEL (dB) 90 93 95 97 100 103

THIS SYMBOL IS INTENDED TO ALERT THE USER TO THE PRESENCE

OF NON-INSULATED "DANGEROUS VOLTAGE" WITHIN THE

PRODUCT'S ENCLOSURE THAT MAY BE OF SUFFICIENT MAGNITUDE

TO CONSTITUTE A RISK OF ELECTRIC SHOCK TO PERSONS.

THIS SYMBOL IS INTENDED TO ALERT THE USER TO THE PRESENCE

OF IMPORTANT OPERATINGAND MAINTENANCE (SERVICING)

INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THE UNIT.

1. Readallsafetyandoperatinginstructionsbeforeusingthis

product.

2. Allsafetyandoperatinginstructionsshouldbekeptforfuture

reference.

3. Readandunderstandallwarningslistedontheoperating

instructions.

4. Followalloperatinginstructionstooperatethisproduct.

5. Thisproductshouldnotbeusednearwater,i.e.bathtub,sink,

swimmingpool,wetbasement,etc.

6. Onlyusedryclothtocleanthisproduct.

7. Donotblockanyventilationopenings,Itshouldnotbeplacedflat

againstawallorplacedinabuilt-inenclosurethatwillimpedethe

flowofcoolingair.

8. Donotinstallthisproductnearanyheatsources;suchas,

radiators,heatregisters,stoveorotherapparatus(includingheat

producingamplifiers)thatproduceheat.

9. Donotdefeatthesafetypurposeofthepolarizedorgrounding-

typeplug. A polarizedplughastwobladeswithonewiderthanthe

other. A grounding-typeplughastwobladesandathirdgrounding

prong. Thewidebladeorthethirdprongareprovidedforyour

safety.Iftheprovidedplugdoesnotfitintoyouroutlet,consultan

electricianforreplacementoftheobsoleteoutlet.

10. Protectthepowercordbeingwalkedonorpinched,particularlyat

plugs,conveniencereceptaclesandthepointwheretheyexit

fromtheapparatus.Donotbreakthegroundpinofthepower

supplycord.

11. Onlyuseattachmentsspecifiedbythemanufacturer.

12. Useonlywiththecart,stand,tripod,bracket,ortablespecifiedby

themanufacturerorsoldwiththeapparatus.Whenacartisused,

usecautionwhenmovingcart/apparatuscombinationtoavoid

injuryfromtip-over.

13. Unplugthisapparatusduringlightningstormsorwhenunusedfor

longperiodsoftime.

14. Careshouldbetakensothatobjectsdonotfallandliquidsare

notspilledintotheunitthroughtheventilationportsoranyother

openings.

15. Referallservicingtoqualifiedservicepersonnel.Servicingis

requiredwhentheapparatushasbeendamagedinanyway;

suchas,power-supplycordorplugisdamaged,liquidhasbeen

spilledorobjectshavefallenintotheapparatus,theapparatus

hasbeenexposedtorainormoisture,doesnotoperatenormally

orhasbeendropped.

16. WARNING: Toreducetheriskoffireorelectricshock,donot

exposethisapparatustorainormoisture.

IMPORTANT SAFETY INSTRUCTIONS

RISKOFELECTRICSHOCK

DONOTOPEN

CAUTION: TOREDUCE THERISKOFELECTRICSHOCK,DO

NOT REMOVECHASSIS.NOUSER-SERVICEABLE

PARTSINSIDE.REFERSERVICING TOQUALIFIED

SERVICEPERSONNEL.

AVIS:RISQUEDECHOCELECTRIQUE-NEPASOUVRIR.

CAUTION

APPARATUS SHALL NOT BE EXPOSED TO DRIPPING OR SPLASHING

AND THAT NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES,

SHALL BE PLACED ON THE APPARATUS.

FRENCH

DURE EN HEURES PAR JOUR 8 6 4 3 2 1

INIVEAU SONORE CONTINU EN dB 90 93 95 97 100 103

Danger

L‘expositionadesniveauxelevesdebruitpeutprovoqueruneperte

permanentedel’audition,Chaqueorganismehumainreagit

differemmentquantalapertedel’audition,maisquasimenttoutle

mondesubitunediminutiondeI’acuiteauditivelorsd’uneexposition

suffisammentlongueaubruitintense.Lesautoritescompetentesen

reglementationdebruitontdefinilesexpositionstolereesauxniveaux

debruits:

Selonlesautorites,touteexpositiondansleslimitesciteesci-dessus,

peuventprovoquercertainespertesd’audition.Desbouchonsou

protectionsdansl’appareilauditifousurl’oreilledoiventetreporteslors

del’utilisationdecesystemed’amplificationafindeprevenirlerisque

depertepermanentedel’audition,Danslecasd’expositions

superieuresauxlimitespreciteesilestrecommande,afindese

premunircontrelesexpositionsauxpressionsacoustiqueseIevees

potentielIementdangeureuses,auxpersonnesexposeesaux

equipementscapablesdedelivrerdetellespuissances,telsce

systemed’amplificationenfonctionnement,deprotegerl’appareil

auditif.

ATTENTION: AFINDELlMlTERLERISQUEDECHOELECTR/QUE,NE

PASENLEVERLECHASSIS.NECONTIENT PASDE

PIECESPOUVANT ETREREPAREEPARL’UTILISATEUR.

CONFERLESERVICE APRES-VENTE AUX

REPARATEURS

ATTENTION

RISQUEDECHOCELECTRIQUE

NEPASOUVRIR.

CE SYMBOLE A POUR BUT D'AVERTIR L'UTILISATEUR DE LA PRESENCE

DE VOLTAGE DANGEREUX NON-ISOLEA L'INTERIEUR DE CE PRODUIT

QUI PEUT ETRE DE PUISSANCE SUFFISAMMENT IMPORTANTE POUR

PROVOQUER UN CHOC ELECTRIQUE AUX PERSONNES.

CE SYMBOLE A POUR BUT D'AVERTIR L'UTILISATEUR DE LA PRESENCE

D'INSTRUCTIONS D'UTILISATION ET DE MAINTENANCE DANS LES

DOCUMENTS FOURNIS AVEC CE PRODUIT.

IMPORTANTESINSTRUCTIONSDESECURITE

1. Lire avec attention toutes les recommandations et précautions

d'emploi avant d'utiliser ce produit.

2. Toutes les recommandations et précautions d'emploi doivent être

conservées afin de pouvoir s'y reporter si nécessaire.

3. Lire et comprendre tous les avertissements énumérés dans les

précautions d'emploi.

4. Suivre toutes les précautions d'emploi pour utiliser ce produit.

5. Ce produit ne doit pas être utilisé près d'eau, comme par exemple

baignoires, éviers, piscine, sous-sol humides ... Etc.

ée, cela

Protéger

pincement, particulièrement au niveau des fiches, des

réceptacles utilisés et à l'endroit de sortie de l'appareil. Ne pas

casser la fiche de terre du cordon d'alimentation.

11. Utiliser uniquement les accessoires spécifiés par le constructeur.

12. Utiliser uniquement avec le chariot de transport, le support, le

trépied, la console ou la table spécifiés par le constructeur ou

vendus avec l'appareil. Lors de l'utilisation d'un chariot, bouger

avec précaution l'ensemble chariotlappareil afin d'éviter les

dommages d'un renversement.

13 Débrancher cet appareil lors d'orages ou s'il n'est pas utilisé

pendant une longue période.

14. Des précautions doivent être prises afin qu'aucun objet ne tombe

et qu'aucun liquide ne se répande à l'intérieur de l'appareil par

les orifics de ventilation ou n'importe quelle autre ouverture.

15. Pour toutes interventions techniques s'adresser à un technicien

qualifié.L'intervention technique est nécessaire lorsque l'appareil

a été endommagé de n'importe quelle façon, comme par

exemple si le cordon secteur ou sa fiche sont détériorés,si du

liquide a coulé ou si des objets sont tombés à l'intérieur de

l'apparei1,si l'appareil a été exposé à la pluie ou à l'humidité, s'il

ne fonctionne pas normalement ou s'il est tombé.

16. ATTENTI0N:Pour réduire le risque d'incendie ou de choc

electrique ne pas exposer l'appareil à la pluie ou à l'humidité.

6. Utiliser exclusivement un chiffon sec pour nettoyer ce produit.

7. Ne bloquér aucune ouverture de ventilation. Ne pas placer le

produit tout contre un mur ou dans une enceinte fern

gênerait le flux d'air nécessaire au refroidissement.

8. Ne pas placer le produit près de toute source de chaeur telle que

radiateurs, arrivées d'air chaud, fourneaux ou autres appareils

générant de la chaleur (incluant les amplificateurs producteurs

de chaleur) .

9. Ne pas négliger la sécurité que procure un branchement polarisé

ou avec raccordement à la terre, Un branchement polarisé

comprend deux fiches dont l'une est plus large que l'autre. Un

branchement à la terre comprend deux fiches plus une troisième

reliée à la terre. Si la fiche secteur fournie ne s'insert pas dans

votre prise de courant. consulter un 'électricien afin de remplacer

votre prise obsolète.

10. le cordon d'alimentation de tout écrasement ou

AFIN DE REDUIRE LES RISQUÉ D'INCENDIE ET DE DECHARGE

ELECTRIQUE, NE PAS EXPOSER CET APPAREILA LA PLUIE OU A

L'HUMIDITE.

TableofContents

Introduction Page3

Page4

NV-E6GCP1” OLEDControlPad Page5

NV-E6GCP-UK1” OLEDControlPad Page6

NV-I8GCP2.7” OLEDControlPad Page7

NV-CTP36ColorTouchPad Page8

NV-WCPSWirelessControlPadFeatures Page9

NV-GRC1RemoteControl Page10

I.PrewireCAT5Termination Page11

II.TerminatingtheSpeakerWire Page12

III.InstallingtheEssentiaAmplifier Page12

IV.InstallingtheNV-E6GMAP-DCAllPort Page12

V.ConnectingtheAllporttotheEssentiaAmplifier Page13

VI.AttachingAudioSourceEquipment

VII.ConnectingtheIREmittersforThird-PartySourceEquipment Page14

VIII.ExpandingEssentiato12Zones Page15

IX.UsingtheNV-I8G,NV-E6GConfiguratorSoftware

1.Start Page16

2.IRLibraries Page17

Page20

4.Macros Page21

5.Zones Page23

6.SystemSettings Page25

7.DownloadUpdate Page27

X.ControlPadSetup Page28

XI.UsingtheControlPad’sMENUButton

Favorites Page28

SourcesPage29

AdvancedZoneControl Page29

Setup Page30

Favorites#1-12 Page30

ZoneSettings Page30

SourceSettings Page32

SystemSettings Page32

XII.EssentiaAccessories

TheNV-I8DLSLearningStationInterface Page34

NV-MI1MuteInterfaceAdaptor Page36

NV-LSI24LocalSourceInterrupt Page37

NV-LSA40LocalSourceAmplifier Page38

NV-LSA40PDSPowerDistributionHub Page39

NV-D2120andNV-D460AudioAmplifiers Page40

Specifications Page41

Troubleshooting Page42

BackPanelFeatures

Page13

3.DefiningSources

InstallingtheEssentiaSysteminYourHome

Introduction

CongratulationsonthepurchaseofNuVo'sEssentiaGSystem.Essentiaprovides40startlinglyclearwattsofsoundtoupto12

listeningzones(12zoneswiththeadditionoftheexpander).NuVo'sGenerationDamplificationusesthelatestindigital

technologytoprovidepeakperformanceinasystemthatsetsanewstandardforefficiencyandenergyconservation.Essentia’s

designallowsittooperateinstandbymodewhileusinglessthan1wattofpowerwhenusedwiththesinglegangOLEDControl

Pads.Evenwithallthezonesturnedonandinfulloperation,theefficientdesignresultsinlowpowerconsumption.

Essentiatrulyoffersthebestinaffordabledistributedaudioforthehome.NuVo'sstate-of-the-artNuVoNetcommunication

throughNuVo’sawardwinningControlPadsandtheColorTouchPadallowyoutointeractwithyoursourceequipmentasifyouare

standingatyourequipmentrack.Essentiaprovidesmusicentertainmentlikenoothermulti-source,multi-zoneaudiosystemin

itsclass.

*Diagramisshownwiththesinglegang,NV-E6GCP-DC1” OLEDControlPads

EssentiaBackPanel

1. TheEssentiawillacceptuptosixaudiosources.TheseareconnectedtoEssentia'smainandexpanderamplifiers

withstandardstereoRCAcables.

2. Thesepreamplineoutsareusedforsendinganaudiosignaltoanexternalpoweramplifier.Thisisusefulfor

largeareasthatrequireadditionalpairsofspeakers.Theseoutputsareconstant,soanamplifierconnectedtoitwillnot

changevolumewiththatzone'sControlPad.Zones1and2bothhaveafixedlineout.

3. Thesepreamplineoutsarealsousedforsendinganaudiosignaltoanexternalpoweramplifier.Usethe

variableoutputwhenyouwantthevolumeoftheadditionalamplifiertobecontrolledbythezone'sControlPad.LiketheFixed

Lineouts,zones1and2eachhaveavariablelineout.

4. These5-voltoutputsarezonespecificvoltagetriggersforexternalamplification.

5. This25-pinconnectionconsolidatesthezonespeakerconnectionstothebackoftheAllporthubintoa

singlecableconnectiononthebackoftheEssentiaamplifier.

6 IRsignalsreceivedfromtheControlPadsarepassedthroughtheIRoutputstothesourceequipmentusing

thesuppliedIRemitters.Outputs1-6areroutedtothecorrespondingsources,andtheSUMoutputiscommonandwillpassall

IRsignals.

7. The9-pinRS232connectionisabi-directionalserialportthatallowstheEssentiaSystemtobecontrolledbyan

externalhomeautomationdevice.Itisalsousedforconfigurationprogrammingdownload.

8. Thisisaconstant5-voltoutputfortriggeringexternalequipment.Thereisnovoltageoutputwhenthezonesareoff.

9. ThisRJ45connectionistheinputforallzoneinformationcomingfromtheSystem’sControlPadsandall

communicationwiththeNuVoNetSuitesourcecomponents.Thisconnectionismadeusingthesuppliedpre-terminatedCAT5or

anynetworkCAT5cable.

10. ThisRJ45outputisdesignedtoconnecttotheLinkinputontheEssentiaExpandercomponentandtransfersallzone

controlcommandsfromtheMainUnit'sNuVoNetorRS232commandinputtotheExpanderforanadditionalsixzones.

11. Thisinputisdesignedtotemporarilymuteanyaudioplayingthroughthesystemwhenthedoorbellorphonerings.This

worksinconjunctionwiththeNuVoNV-MI1muteinterfaceaccessory.Italsoactsasatriggerforwholehousepagingthrough

anythirdpartypagingdevicewhensetforthisfunctionintheConfiguratorSoftware.

12. AdetachablepowercordconnectsthesystemtoanexternalACpowersupply.

SourceInputs:

FixedLineouts:

VariableLineouts:

ZoneTriggerOutputs:

AllportConnection:

.IRemitterOutputs:

RS232:

Status:

NuVoNet:

Link:

Mute:

AC:

5 6

FIXED VAR

ZONE

TRIG

ZONE

STATUS

NuVoN et

RS232

SUM

ALLPORTCONNECTION

IROUTPUTS

2 3 4 5 6

LINK

MUTE

MADEINC HI NA

100~240V50~6 0H z13 0W

1807

N18 39

www .nu vot echno logie s.com

MODEL NV-E6 GM

SIXS OURCES IXZONE

AUD IODIST RIBUT IONSYS TEM

303 3118

NuVoTe chn olo giesLL C H ebr on,K entuc kyUSA•

CON FORMST OUL

STD .6006 5CERTI FIED

TOCA N/CSA ST D.

C22 .2No.6 0065: 03

RoHS

NV-E6GCP-DC1” OLEDControlPad

1. Thisindicatesthecurrentaudiosourceplayinginthatzone.Sourcenamescanbecustomizedinthe

ConfiguratorSoftwarewithathree-characterdesignation.

2. EachControlPadcomeswithwhite,ivory,almond,andblacktrimplatesthatofferascrewlessandelegant,

finishedinstallation.

3. Theorganiclightemittingdiodedisplayisahighlyfunctionalandvividmulti-linedisplay.

4. Thisportionofthedisplayservestwofunctions:Innormaloperation,itindicatestheartist,

station,metadata,andothersourceinformation,andinMenumode,itdisplaysmultiplelinesofinformationforbrowsing

purposes.

5. ThisbargraphindicatestheaudiovolumelevelwhentheControlPadisinnormalplaymode.

WheninMenuMode,itindicatestheplaybackstatusofdigitalmusicfilesfromtheMusicPortoriPod.

6. Thisbuttonturnsthelocalzoneonandoffandhastheabilitytoturnallzonesoffsimultaneously.

7. Menuservesasaccesstomusicbrowsing,presets,andfavorites,aswellasspecificzoneandsystemsetting

parameters.

8. ThisIRprogrammablebuttontogglesbetweentheplayandpausefunctionsofthechosensource.Whenusing

theT2Tuners,thisbuttontogglesthroughtheTuner'sreceivemodes.Athird “pressandhold” functioncanalsobeassigned

tothisbuttonforadditionalfunctionality.

9. TheOKbuttonservesadualfunction.Innormalplaymode,itscrollsthroughtheavailableaudiosources.InMenumode,it

isusedtoselectthehighlightedmenuitem.

10. ThisisanIRprogrammablebuttonforsimplesourcetransportfunctions.Typically,itwouldtrackforward

andbackortuneupanddown.Athird “pressandhold” functioncanalsobeassignedtothisbuttonforadditional

functionality.

11. Thesearrowshaveadualfunction.Innormalplaymode,theycontrolthevolumelevelupanddown.In

Menumode,theyscrollupanddownthroughmenuselections.

12. TheControlPadhasabuilt-inIRreceiverforcompletewirelesscontrolofallaudiosourceequipment.

SourceIndicator:

WallPlate:

OLEDDisplay:

NowPlaying/MenuDisplay:

VolumeLevelIndicator:

Power:

Menu:

Play/Pause:

OK:

Forward/Reverse:

ArrowUpandDown:

IRReceiver:

M3A

1:19

3:48

2OF2-Followth...

drift-EdgeofTom

1. Thisindicatesthecurrentaudiosourceplayinginthatzone.Sourcenamescanbecustomizedinthe

ConfiguratorSoftwarewithathree-characterdesignation.

2. TheControlPadshipswithwhite,orblacktrimplatesthatthataredesignedtomatchthestandardUK50x50mm

finishedinstallation.

3. Theorganiclightemittingdiodedisplayisahighlyfunctionalandvividmulti-linedisplay.

4. Thisportionofthedisplayservestwofunctions:Innormaloperation,itindicatestheartist,

station,metadata,andothersourceinformation,andinMenumode,itdisplaysmultiplelinesofinformationforbrowsing

purposes.

5. ThisbargraphindicatestheaudiovolumelevelwhentheControlPadisinnormalplaymode.

WheninMenuMode,itindicatestheplaybackstatusofdigitalmusicfilesfromtheMusicPortoriPod.

6. Menuservesasaccesstomusicbrowsing,presets,andfavorites,aswellasspecificzoneandsystemsetting

parameters.

8. ThisIRprogrammablebuttontogglesbetweentheplayandpausefunctionsofthechosensource.Whenusing

theT2Tuners,thisbuttontogglesthroughtheTuner'sreceivemodes.Athird “pressandhold” functioncanalsobeassigned

tothisbuttonforadditionalfunctionality.

9. TheOKbuttonservesadualfunction.Innormalplaymode,itscrollsthroughtheavailableaudiosources.InMenumode,it

isusedtoselectthehighlightedmenuitem.

10. ThisisanIRprogrammablebuttonforsimplesourcetransportfunctions.Typically,itwouldtrackforward

andbackortuneupanddown.Athird “pressandhold” functioncanalsobeassignedtothisbuttonforadditional

functionality.

11. Thesearrowshaveadualfunction.Innormalplaymode,theycontrolthevolumelevelupanddown.In

Menumode,theyscrollupanddownthroughmenuselections.

12. TheControlPadhasabuilt-inIRreceiverforcompletewirelesscontrolofallaudiosourceequipment.

SourceIndicator:

WallPlate:

OLEDDisplay:

NowPlaying/MenuDisplay:

VolumeLevelIndicator:

Menu:

Play/Pause:

OK:

Forward/Reverse:

ArrowUpandDown:

IRReceiver:

7. Thisbuttonturnsthelocalzoneonandoffandhastheabilitytoturnallzonesoffsimultaneously.Power:

*TheNV-E6GCP-UKisdesignedtofitintoasingle50x50mmUKmountingringorbackbox.

NV-E6GCP-UK1” OLEDControlPad*

M3A

1:19

3:48

2OF2-Followth...

drift-EdgeofTom

NV-I8GCP2.7”OLEDControlPad

drift

SVR

1of9

FollowtheDay

3:48

1:28

EdgeofTomorr

1. Thisindicatesthecurrentaudiosourceplayinginthatzone.Sourcenamescanbecustomizedinthe

ConfiguratorSoftwarewitha3characterdesignation.

2. EachControlPadcomeswithwhite,ivory,almond,andblacktrimplatesthatattachmagneticallytotheface

oftheControlPad.AdditionalstylesoftrimplatesareavailablefromNuVo.

3. Theorganiclightemittingdiodedisplayisahighlyfunctionaleightlinedisplay.

4. Thisportionofthedisplayservestwofunctions.Innormaloperation,itindicatestheartist,

station,metadata,andothersourceinformation.InMenumodeitusesasmallerfonttodisplaymultiplelinesoflinesof

informationforbrowsingpurposes.

5. ThisbargraphindicatesboththeaudiovolumelevelwhentheControlPadisinnormalplaymode

andtheplaybackstatusofdigitalmusicfilesfromtheMusicPortorNuVoDocksforiPod.

6. Menuservesasaccesstomusicbrowsing,presets,andfavorites,aswellasspecificzonesettingparameters.

9. TheOKbuttonalsoservesadualfunction.Innormalplaymode,itscrollsthroughtheavailableaudiosources.In

menumode,itisusedtoselectthehighlightedmenuitem.

10. Thesearrowshaveadualfunction.Innormalplaymode,theycontrolvolumelevelupanddown.In

menumode,theyscrollupanddownthroughmenuselections.

11. TheControlPadhasabuilt-inIRreceiverforcompletewirelesscontrolofalltheaudiosourceequipment.

12. ThisisanIRprogrammablebuttonforsimplesourcetransport.Typicallyitwouldtrackforwardorback

ortuneupanddown.Athird “pressandhold” functioncanalsobeassignedtothisbutton.

Sourceindicator:

Coverplate:

OLEDDisplay:

NowPlaying/MenuDisplay:

VolumeLevelIndicator:

Menu:

Play/Pause:

OK:

ArrowUpandDown:

IRReceiver:

Forward/Reverse:

7. Thisbuttonturnsthelocalzoneonandoffandturnsallzonesoffsimultaneously.

ThisIRprogrammablebuttontogglesbetweentheplayandpausefunctionsofthechosensource.When

usingtheT2Tuners,thisbuttontogglesthroughtheTunersreceivemodes.Athird “pressandhold” functioncanalsobe

assignedtothisbutton

Power:

1. Thisdisplayscrucialinformationabouttheselectedsource,suchasartist,album,track,title,frequencyor

station,andmetadataforAM/FMandSatelliteradio.AlbumartisalsodisplayedwhenusedwiththeMusicPortsource.When

inmenumode,themenucontrolchoicesaredisplayed.

2. AtimedisplayisdistributedtoallthezonesintheSystembyNuVoNet.Thisissetwhenaconfigurationis

downloadedtotheSystemoritcanbesetintheSystemMenu.

3. Thisindicatorwilllightwhenthesystemisinpartymode(allzonesturnedonandoperatedfromoneControl

Pad).

4. Whenthisiconislit,ExclusiveSourceisturnedon.ExclusiveSourcelocksoutsourcecontrolfromother

zonesofthechosensource.

5. Thisiconwilllightwhenthezoneistemporarilymuted.

6. Thisiconindicatesthatthezoneisin “Sleep” mode,whichistheabilitytosetanaudiosourcetoplayforaspecified

amountoftime.

7. Thisindicatesthatthezoneislocked.Inthisstate,afour-digitsecuritycodeisrequiredtounlockthezone'scontrol

features.

8. Thisiconindicatesthatthezoneissetfor “DoNotDisturb”.TherearethreeDoNotDisturbchoices;exclude

thezonefromPartyMode,PageMode,and/orSystemMute.

9. Thisiconwilllightwhenthesystemistriggeredtogointo “PageMode”.

10.

11. Thesefunctionbuttonsrepresentbasicsourcecontrol.Theychangeinfunctionalitywiththechosen

audiosource.

12.

15. Thisbuttonturnspowertothezoneonandoff.Whenpushedandhelditwillturnoffallofthezonesinthe

system.

SourceDisplay:

CurrentTime:

PartyMode:

ExclusiveSource:

Mute:

Sleep:

Lock:

DoNotDisturb:

Page:

MenuButton:

TransportFunctions:

PowerButton:

Menuservesasaccesstomusicbrowsing,presets,andfavorites,aswellasallowingaccesstospecificzone

andsystemcontroloperations.

Thisbargraphindicatestheplaybackstatusofdigitalmusicfilesfrommusic

playbacksourcedevicessuchastheMusicPortorNuVoDocksforiPod.Thesamebargraphdisplaytemporarilysupports

volumeleveldisplaywheneveravolumeadjustmentisbeingmade.

13. Thesebuttonsincreaseordecreasethezone'svolume.

14. ThisbuttonreturnstheusertotheHomescreen(theviewshownhere).

PlaybackStatus/VolumeLevelIndicator:

VolumeUpandDownButtons:

HomeButton:

NV-CTP36ColorTouchPadFeatures

1. AthreecharacterabbreviationoftheselectedsourceappearsinthisportionoftheWirelessControlPad

display.

2. Thedisplayismulti-lineOLED(OrganicLightEmittingDiode).Itshowsalbum,artistandtrackforpersonalmusic,

andchannelandfrequencyinformationforbroadcastmusic.Inmenumode,thedisplaygoestoeightlinesoftext.

3. Thisbargraphindicatestheplaybackstatusofdigitalmusicfilesfrommusicplayback

sourcedevicessuchastheMusicPort,orNuVoDocksforiPod.Thesamebargraphdisplaytemporarilysupportsvolumelevel

displaywheneveravolumeadjustmentisbeingmade.

4. Menuservesasaccesstomusicbrowsing,presets,andfavorites,aswellasallowingaccesstospecificzoneandsystem

controloperations.

5. TheseareusedtoscrollupanddownthroughthemenusandcontrolvolumeUpandDowninnormalplay

mode.

6. Thisbuttonturnsthelocalzoneonandoff,orturnsallzonesoffsimultaneously.

7. Thisindicatesthecurrentbatterychargelevel.

8. Whenthisbuttonispushed,alistofavailablelisteningzonesislistedonthedisplay.Theusercanchangezone

controlbymovingthehighlighttothedesiredzoneandpressingtheOKbutton.

9. TheOKbuttonservesadualfunction.Innormalplaymode,itsequencesthroughtheavailableaudiosources.InMenu

mode,itisusedtoselectthehighlightedmenuitem.

10. InNuVoNetcommunication,thesebuttonswilltrackforwardandbackortuneupanddown.Forthird-

partysources,theseareIRprogrammablebuttonsforsimplesourcetransportfunctions.Anadditional “pressandhold”

commandcanalsobeassignedtothisbuttonforadditionalfunctionality(IRcommandscanonlybeassignedtobuttonsinthe

EssentiaConfiguratorsoftware).

11. ThisIRprogrammablebuttontogglesbetweentheplayandpausefunctionsofthechosensource.Whencontrolling

theT2Tuners,thisbuttontogglesthroughtheTuner'sreceivemodes.Athird “pressandhold” functioncanalsobeassignedto

thisbuttonforadditionalfunctionality.

SelectedSource:

OLEDDisplay:

PlaybackStatus/VolumeLevelIndicator:

Menu:

UpandDownArrows:

Power:

BatteryDisplay:

ZoneButton:

OK:

ForwardandBackArrows:

Play/Pause:

MENU ZONE

drift

M3A

1of9

FollowtheDay

3:48

1:28

EdgeofTomorr

NV-WCPSWirelessControlPadFeatures

HOLD

ALL OFF

NV-GRC1

REMOTECONTROL

FAVORITES

VOLUME

SOURCE/OK

PWR

MUTE

SLEEP

DISP

F1 F2

F3 F4

NV-GRC1RemoteControl

1. Eachzonecanbeturnedonandoff,orall

zonescanbeturnedoffwiththisbutton.

2. Thisservestwofunctions.Innormal

operationmode,itisavolumecontrol,butwhen

youareusingthemenufeaturesoftheControlPad,

itallowsscrollingupanddown.

3. Thesebuttonsarecurrently

inactiveanddesignedforfutureuse.

4. TheseIRprogrammable

buttonsaredesignedforforwardandreverse

functions.

5. AfunctionoftheEssentiaSystemisthe

abilitytoaccessuserdefinedfavoritesforeasy

access.Thefirsttwelvearedirectlyaccessibleusing

theGRC1Favoritesbuttons.

6. ThisbuttonallowsaccesstotheDisplaymenu

availableateachControlPad.

7. ThisLED(LightEmittingDiode)lights

toindicateabuttonpush.

8. TheGRC1remoteprovidesadiscretemute

functiontoquicklysilencethezone'soutput.

9. Thisisanotherdualfunctionbutton.In

normalplaybackmodeitscrollsthroughthe

sources,orinmenumodeitselectsahighlighted

menuchoice.

10. ThisIRprogrammablebuttontoggles

betweentheplayandpausefunctionsofthechosen

source.WhenusingtheT2Tuners,thisbutton

togglesthroughtheTuners’ receivemodes.

11. Thisbuttonentersthemenufeaturesofthe

ControlPad.WheninMenumode,theVolumeup

anddownbuttonsscrollthroughthemenuchoices.

12. Thisallowsaccesstothesleeptimermode.

13. Thesebuttonsarecurrentlyinactive.

Theyaredesignedforfutureuse.

Power:

Volume:

FunctionButtons:

ForwardandReverse:

Favorites:

DISP:

FunctionLED:

MUTE:

SOURCE/OK:

Play/Pause:

MENU:

Sleep:

G1andG2:

InstallingtheEssentiaSysteminYourHome

I. Prewire

TheEssentiaSystemusesCAT5cableforControlPadcontrolandeithertwoorfour-conductor16-gaugespeakerwire.Allthewire

is “homerun” fromeachzonetothelocationoftheEssentiaamplifierandAudioSourceequipment.

CompleteCAT5CrimpingInstructions

TheNuVoaudiosystemsrequireCAT5,unshielded,twisted

pair(UTP)forcommunicationbetweentheControlPadsand

themainamplifierunit.Eachendofthewireisterminated

withanRJ45connector.

TheEssentiaSystemcanaccommodate2,000totalfeetof

CAT5cable.Forthemostreliableoperation,itisbestthatno

singlerunofCAT5exceeds250feet.

ThecorrectwiringschemefortheCAT5cableisstandard

EIA/TIA568A,or568B.ProperlyterminatingtheCAT5cable

iscrucialfortheoperationofthesystem.Itisvery

importanttouseagoodqualitycrimptool,andtesteach

endtoendrunwithaCAT5wiretestertoinsurethatyour

systemoperatesflawlessly,Fig.1.

1. Stripa2to3inchportionoftheinsulation,exposing

the4twistedpairs.

2. Untwistthewiresandfanthemoutindividually.Arrange

thewiresintothecorrectcolorschemeasshowninFig.

3. Flattenthewiresintheircorrectorderandtrimthem

evenlyacrossthetop.Mostcrimptoolshaveawire

trimmerbuilt-in.Itisbesttotrimthewirestoabout½”

inlength.

4. Whileholdingthewiresflatbetweenyourthumband

forefinger,insertthewiresintotheRj45connectorso

eachisinitsownslot.PushthewireintotheRJ45soall

8conductorstouchtheendoftheconnector.The

insulationjacketshouldextendbeyondthecrimppoint

oftheRJ45.

5. InserttheRJ45intothecrimptoolreceptacleand

squeezethetoolfirmly.Notethataratchettype

toolshouldtightendownuntilitnolongerclicks.

6. TheRJ45shouldbefirmlycrimpedtotheCAT5

insulation.Itisnecessarythatthecolorschemebe

repeatedidenticallyoneachendofthewire.

7. TesteachterminationwithaCAT5Testerbefore

completingtheinstallation.

Step-by-StepCrimpingInstructions:

Fig.1:EIA568Aand568BwiringschemeforCAT5Cable

Pin#568A

1.GreenStripe

2.Green

3.OrangeStripe

4.Blue

5.BlueStripe

6.Orange

7.BrownStripe

8.Brown

Note:Colorslistedas “stripe” areawhitewire

withacoloredstripe.

Step1 Step2 Step3

Step4

Step5 Step6

1 2 3 4 5 6 7 8

Topviewwith

tabdown.

Wiresinsertfrom

thisend.

Pair2

Pair3

Pair4

Pair1

IR Active

Gro

ControlDa

a Bus-

Con

tro

lDa

Bus+

IR Data

Ground

+20V Po

wer

Pin#568B

1.OrangeStripe

2.Orange

3.GreenStripe

4.Blue

5.BlueStripe

6.Green

7.BrownStripe

8.Brown

LEFT

RIGHT

LEFT

RIGHT

II.TerminatingtheSpeakerWire(Fig.2)

AllNuVoSystemsoperateacrossa “homerun” wiringscheme

usingCAT5forthezone'sControlPadcommunicationand

control,andaseparaterunofspeakerwireforeachzone.

TheEssentiaoperatesdifferentlyinthatitszonespeaker

wireterminationismadeattheAllporthub.Thesuggested

wireforthispurposeis16-gauge,2-or4-conductor

speakerwireratedforin-walluse.Theterminationis

performedusingamodular “Euro” connector.Each

conductorisscreweddowntotheEuroconnectorand

pluggedintotheappropriatezonespeakerconnectionon

thebackoftheAllport.Theproperterminationforeachzone

isLeftchannel: — and ,andRightchannel: — and .+ +

EightRJ45jacksaremeantfortheControlPadsinuptosix

zones,withonereservedforanadditionalControlPadand

anotherfora “link” jackusedforexpansionfromsixto

twelvezones,see

TheorderinwhichtheCAT5cablesarepluggedintothejacks

isirrelevanttothesystem'soperation.Sixmodular “Euro”

connectorsareusedtoterminatethespeakersineachzone,

see .

OncethespeakerandCAT5terminationsarecomplete,the

Allportcanbeinstalled.

SectionVIII,ExpandingEssentiato12

Zones

SectionII,TerminatingtheSpeakerWire

Fig.2

III.InstallingtheEssentiaAmplifier

Systemsetupworksbestwhentheamplifierisplacedinthe

samelocationastheaudiosourceequipment.Thisis

typicallyinanaudiorack,entertainmentcenter,oracloset

dedicatedtohousingthehomeaudio/videoequipment.To

insurecool,reliableoperation,wehighlyrecommend

allowingoneemptyrackspaceaboveaMainoranExpander

amplifierunit.Also,insurethereisventilationaroundthe

wholeracklocation.

TheamplifiershouldbepluggedinandtheblueStandbyLED

shouldbelitbeforeproceedingwiththeremaining

installation.Thisactivatesprotectivecircuitryforthe

internalcomponents.

IV.InstallingtheNV-E6GMAP-DCandNV-E6GMAP-UK

Allport(Fig.3)

TheAllportisamulti-connectionhubdesignedtoacceptall

theCAT5andspeakerwiresfromallzonesoftheEssentia

System.ThelocationoftheAllportshouldbedeterminedby

thelocationoftheEssentiaamplifier.Itisbesttoplaceitin

awallbehindtheamplifierthatcanbeeasilyaccessibleif

necessary.

TheNV-E6GMAP-DCandNV-E6GMAP-UKAllportsare

physicallydifferentdimensionsforthestandardDecoraand

UKdualmountingrings.Otherthanthedimensions,thetwo

operateequally.

Fig.3

NV-E6GMAP-DC

NV-E6GMAP-UK

V.ConnectingtheAllporttotheEssentiaAmplifier(Fig.4)

The

fig.4diagramshowstheconnectiontotheNV-E6MAP-DC

Allport.

Onceinstalled,thefrontoftheAllporthasthree “Device”

RJ45jacksforCAT5connectionsfromtheNuVoNetSuite

components,andanRJ45jacklabeled “NuVoNet” which

mustbeconnectedtothe “NuVoNet” inputonthebackof

theEssentiaamplifier.ThisisnecessaryforControlPad

communication,regardlesstheuseoftheNuVoNetSuite

components.Onceconnected,theControlPadsarereadyto

communicatewiththeSystem.TheEssentiaSystemis

shippedwithasix-footpre-terminatedCAT5networkcable,

oryoucanpurchaseoneifadifferentlengthisrequired.

Thespeakerconnectionismadewiththe25-pinAllport

Cable.Themodularspeakerconnectorsmustbepluggedinto

theappropriatespeakerconnectionsonthebackofthe

Allport.

Fig.4

VI.AttachingAudioSourceEquipment(Fig.5)

EachpieceofaudioequipmentisconnectedtotheEssentia

amplifierwithstandardstereoRCAcables.AttachanRCA

cabletothecorrespondingaudiooutputonthesource

equipmentandtothedesiredsourceinputonthebackof

theEssentiaamplifier.Thenumberedinputforeachsource

isimportantintheconfigurationofthesystem.Thiswillbe

coveredindetailintheEssentiaConfiguratorportionofthis

manual.

TheZone1and2outputshave3.5mmstereopre-amp

lineoutsattachedtothem.Theirpurposeistoprovidethe

zone’scurrentaudioselectionsignaltoanadditional

amplifier.Bothversions,fixed(aconstantsignalthat

requiresavolumecontrolseparatefromtheNuVozone

ControlPad)andvariable(asignalthatvariesinlevel

relativetothevolumesettingontheNuVozoneControlPad)

arebothsimultaneouslyactiveandrequirenoexternal

switchforuse.

Eachoutputhasanattachedvoltagetriggeroutputthat

allowstheattachedamplifiertobetriggeredfromavoltage

presentedwhenthezoneControlPadisturnedon.The

voltagetriggerisremovedwhenthezoneisturnedoff.

UsingtheFixedandVariableLineouts

Fig.5

T2AM/FMTuners

UnitializedState

Detected(PressOK) OK

TunerA,Standalone,Source1,Source2,

Source3,Source4,Source5, Source6.

EachoftheT2Tunercomponentshousestwoindividual

AM/FMreceivers,whichhavetheirowndisplayonthefront

panel.OncetheT2ispluggedinandtheNuVoNetCAT5is

connectedtotheAllport,theinitialdisplay,

willappear.Whenthe buttonis

touched,theTunerwillpromptaregionaltuningselection.It

willthengoto

and StandAloneis

automaticallyhighlightedatinitialstartup.Usethearrows

toscrolltotheappropriatesourcenumber.Whenthe

selectionismade,theT2willgotothesameselectionfor

TunerB.Wheneachoutputselectioniscomplete,the

EssentiaSystemNuVoNetwillrecognizethatsource.

SettingupNuVoSourcesforusewithNuVoNet

IX.UsingtheEssentiaConfigurator

Software .

AfeatureoftheEssentiaSystemisitsabilityto

automaticallycommunicatewiththeT2Tuners,MusicPort,

andtheNuVoDocksforiPod.Thecommunicationhappens

throughtheAllportconnectionhubacrossacommunication

protocolcalledNuVoNet.Althoughsoftwareprogrammingis

notnecessaryforthisfunction,configuringtheinstallation

throughtheConfiguratorSoftwarepriortoinstallationhas

distinctadvantages,see

,page16

WhentheT2Tunersarepluggedinforthefirsttime,they

willdisplayaprompttoselectasourceinputnumberforthe

Essentia.ForNuVoNettocommunicateproperly,youshould

havealreadyconnectedtheNuVoNetcomponentstooneof

thethree “PeripheralDevice” inputsonthefaceofthe

Allport.

STATU S

NuVo Net

RS2 32

SUM

ALL PORTCO NNECT ION

IROUTP UTS

2 3 4 5 6

LIN K

MUT E

ALL PORTCO NNECT ION

FIX ED VAR

ZON E

TRI G

ZON E

2 3

USEO NLY NuVo

NV-T 2PAS

POW ERED ANT ENNA SY STEM

AUD IOOUT

AUXI N

TRI GGER

ON= +12V

AUD IO

OUT PUT

ANTEN NA INP UT TUNERB

MusicPortMPS4andMPS4-E

TheMusicPortandMusicPortElitesourcecomponentsuse

theIPconnectiontothehome’snetworkrouterforthe

sourceaddressselection.TheMusicPortRemoteConfig

utilityisaccessedthroughaninternetbrowserbyentering

theMusicPort’sIPaddressfollowedby/andconfig,ie.

192.168.1.189/config.TheRemoteConfigwillopenanda

“SourceAddress” taballowsyoutosetthesourcenumber

foreachofthefourMusicPortaudiooutputs.These

selectionsaresavedtotheMusicPort’sflashmemoryand

whenitsNuVoNetoutputisconnectedtotheAllport,the

attachedEssentiaSystemwillrecognizetheMusicPort

sources.

VII.ConnectingtheIREmittersforThird-PartySource

Components(Fig.6)

IRcommandsforthesourceequipmentaretransferredfrom

theEssentiaamplifiertothesourceequipmentusingthe

miniIRmouseemitters.Sixofthesearesuppliedwithyour

EssentiaSystem.Theemitterispluggedintothe

correspondingsourceIRoutputontheEssentiaandthen

placedovertheIRreceiverwindowonthesource

component.TheIRoutputsareindividuallyroutedto

sources1-6.

Fig.6

NuVoDockforiPod

NotethatalthoughtheNuVoDocksystemhasa16position

rotaryswitchforsourceinput,onlypositions1 – 6areused.

TheWired,WallMountandWirelessNuVoDocksforiPoduse

asimplerotaryswitchtosettheappropriatesourceinput.

UptotwoWirelessNuVoDocksandsixWiredNuVoDocks

couldbeusedasindividualsourcesthroughNuVoNet.The

NuVoDocksconsistofadockforiPodplaybackand

rechargingaswellasareceivercomponentdesignedto

communicatewithNuVoNet.Priortopluggingthereceiver

intotheEssentiaAllport,settheSourcerotaryswitchtothe

desiredsourcenumberinput.Onceset,theControlPadswill

automaticallydisplaytheiPodinformationwhenaniPodis

pluggedintotheNuVoDock.EachNuVoDockandreceiver

musthaveaseparatesourcenumberselected.

ThetwoSUMoutputswillflashanyIRcommandthatissent

fromanyofthezones.Thisismostcommonlyusedwithan

IRblasterdesignedtoflashIRcommandstoavarietyof

components.

STATU S

NuVoNet

RS23 2

SUM

ALLPORTC ONNEC TION

IROUTPUTS

2 3 4 5 6

LINK

MUTE

ALLPORTC ONNEC TION

dISC

COMPACT

NuVoT2TunerDirectNumericAccess(Fig.7)

TheNuVoT2TunershavetheabilityfordirectIRaccessto

numericstationtuning.ThiscanbedonethroughtheT2

remotecontrolorusingathirdpartyremotecontrolthathas

beentaughttheT2IRcodes.Toallowthiscontrol,itis

necessarytolinktheEssentiaSUMIRoutputtotheDirectIR

inputontheT2usingastereo3.5mm(1/8”)monopatch

cable.Oncetheconnectionismade,theT2willrespondto

thenumericIRcommandsissuedthroughtheEssentia

ControlPadIRreceivers.

Fig.7

T2TunerIRInput

EssentiaIROuput

ModelNV-T 2D F

DualXMTune r

NuVoTech onlogie sLL C•

Cincinn at iOh ioU SA

www.n uvotech no lo gi es .com

SYSTEM

IRPAS S- TH RU

IRINPUT

NuVoNet

OUTIN

RS23 2

STATU S

NuVoNet

RS23 2

SUM

ALLPORTC ONNEC TION

IROUTPUTS

2 3 4 5 6

LINK

MUTE

ALLPORTC ONNEC TION

VIII.ExpandingEssentiato12Zones(Fig.8)

SixadditionallisteningzonescanbeaddedtotheEssentia

SystemusingtheEssentiaExpanderSystem,NV-E6GXS.The

expanderrequirestheuseoftheLinkRJ45connectiononthe

mainamplifier.ThisisconnectedtothecorrespondingLink

RJ45connectionontheexpanderamplifier.Alloftheupper

zonecontrolcommandsfromthemainunit'sNuVoNetor

RS232commandinputaretransferredthroughthis

connection.TheNV-RCA3Y-adaptercablesincludedwith

theexpanderunitallowaparallelconnectionoftheleftand

rightsourceoutputtothecorrespondingsourceinputson

bothamplifierunits,fig.8a.

Theexpansionrequirestheinstallationoftheexpander

Allportincludedwiththeexpandersystem.Theexpander

AllportistheconnectionfortheadditionalzoneControl

Pads,uptoseven,andtheadditionalzonespeakers.A

secondAllportcablemustbeattachedfromtheexpander

AllporttotheexpanderamplifierandashortCAT5jumper

cable,includedwiththeexpandersystemisusedonthe

backofthetwoAllportstointegratealloftheSystem’s

ControlPadsintooneNuVoNetconnectiontothemain

amplifier,Fig.8b. ThesefiguresareshownusingtheNV-

E6GMAP-DCAllport.

Oncetheseconnectionsarecomplete,theControlPadscan

beaddressedforatwelve-zonesystem.

Note:IfyouareusingtheNuVoDocksforiPod,itisnecessary

touseafemaleRCAtomale3.5mmadaptor.Thesearereadily

availableandarenotsuppliedwiththeNuVoDocksystem,fig.

8c.

Fig.8b

E6GXAP-DC

ExpanderAllportHub

E6GMAP-DC

MainAllportHub

Fig.8a

NV-RCAY3 “Y” cable

TUN ERBANT ENNA I NPU T

USEO NLY NuVo

NV-T 2PAS

POW ERED ANT ENNA SYS TEM

AUD IOOUT

TRI GGER

ON= +12V

AUD IO

OUT PUT

FIX ED VAR

ZON E

TRI G

ZON E

1 2 3 4

FIX ED VAR

ZON E

TRI G

ZON E

1 2 3 4

EssentiaGExpander

EssentiaGMain

AudioSource

Fig.8c

Fig.8

ALL PORTCONNE CTIO N

IX.UsingtheNV-I8G,NV-E6GConfiguratorSoftware

1.Start(Fig.9)

ThefollowingsectionincludestheoptionalNV-I8DLSIR

LearningStation.ThisisavailableasapackagefromNuVo

TechnologiesoranyAuthorizedNuVoDistributor.The

ConfiguratorSoftwareisaPCprogramdownloadedfromthe

NuVowebsiteDealerResourceCenter.AccesstotheDealer

ResourceCenterrequiresaNuVoissuedlogin.

TheConfiguratorisatabbedWizard-styleinterface

designedtosequentiallywalktheinstallerthroughthe

systemsetupforboththeGrandConcertoandEssentia.

Whentheprogramislaunched,theStarttabishighlighted.

ClickingViewandselectingE6GModetailorsthe

configurationforEssentia.TheStartTabgivesthreechoices

forbeginningaconfiguration.Youcancreateanewfile,

openanexistingfile,orretrieveanexistingfilefroma

configuredEssentiaSystem.

Onceconfigured,thefinishedprogramloadedintothe

Essentiamainamplifiercanalwaysberetrievedviathe

RS232portandhastheabilitytobeedited.

Onceaconfigurationfilehasbeenopened,youcanthen

clickonthenextbuttontocontinue.TheConfiguratorwill

notletyoucontinuebeyondStartwithouteithercreatinga

newfileoropeninganexistingfile.Itwillalsoprevent

movingforwardthroughanyofthetabsuntilthenecessary

informationiscompletedinanyoneofthetabs.

Fig.9

1.1OpenorCreateEssentiaConfiguratorFile(fig.10)

1.2RetrieveConfigurationfromEssentia

Whenyouclickonthisbutton,theprogramgoestoaConfig.

File.Thereyoucaneitheropenoneoftheexisting

configurationsorspecifythenameofanewfile.

Configurationsaresavedwitha.cfgextension.

ToretrieveaconfigurationfromanexistingEssentia

installation,launchtheConfiguratorSoftware.Makesure

yourcomputerisconnectedtotheRS232portontheback

paneloftheEssentiaamplifier.TheStartupscreenhastwo

buttons.Thefirstisusedtoopenanexistingconfiguration

ortocreateanewone.Thesecondasksto “RetrieveExisting

ConfigurationFromEssentia.” Whenyouclickonthe

“Retrieve” button,aprogresswindowwillappear.

Ifyouhavethisconfigurationalreadystoredonyour

computer'sharddrive,youwillseeadialogboxaskingif

youwishtooverwritetheexistingfile.Ifthisfileisnot

storedinyourcomputer,thisboxwillnotappear.

DonotusetheFactoryConfigfileasatemplate.Thisisonly

usedasatooltorestoreaconfiguredEssentiatofactorynew

condition.

Fig.10

Fig.12

Fig.11

2.1AddingaNewComponenttotheIRLibrary(Fig.12)

NewcomponentIRfilesareeasilyaddedbyclickingonthe

AddNewbutton.ThisbringsupanewwindowtitledAddNew

Component.Inthiswindowyoumustfirstenterthe

manufacturernameandmodel.TheTypedrop-downmenu

containsalargelistofcomponents.Eachisatemplateof

commonfunctionsforthattypeofequipment.Clickingon

thetypethatmatchesthecomponentwilladdthetypename

inthatfield.Ifdesired,youcanaddatypenamethatisnot

inthedrop-downmenu.

ClickingonOKwillautomaticallyaddtheselected

componentandassociatedfunctionstotheIRLibrary.

UsingtheIRLearningStationInterface(Fig.13)

TorecordnewIRcodes,youwillneedtheIRLearningStation

Interface.TheIRLearningStationInterfaceisapowerful

toolforsettingupnewIRLibrariesforusewiththe

ConfiguratorSoftware,andispartoftheIRLearningStation

Package.Capturingfunctioncodesandaddingthemtothe

componentIRLibraryisaneasyprocess.

TheInterfaceboxisconnectedtoyourcomputerusingone

oftheRS232connectioncablesprovidedwiththeIR

LearningStationpackage.Notethatinmanycases,personal

notebookcomputersdonothaveaDb9serialcable.Inthis

caseanRS232toUSBdonglecablewillbenecessary.

ThebackpaneloftheInterfaceboxhastwoIRoutputsfor

testingpurposes.YoucanusetheincludedIRemitterand

attachittotheIRwindowonthefaceofthesource

component,ortothebuilt-inIRblaster,which,whenaimed

atthesourceequipment,willfiretheIRcommand.

2.IRLibraries(Fig.11)

TheIRLibraryisalistofavailablecomponentsandtheirIR

functioncodes.TheConfiguratorSoftwarestorescapturedIR

codesinasingledirectory.Oncecapturedordownloaded,

theConfiguratorSoftwarewillpermanentlystoreitasa.gcl

file.

Fig.13

POWER

12VDC/0.4A

CONNECTTO

CONCERTOD

EMITTER

BLASTER

ConcertoLearningStation

ModelNV-I8DLS

PASSTHRU

READY

IRSENSOR

TEST ACTIVE

POWER

Page is loading ...

Legrand Essentia E6G Operating instructions

Brand: Legrand

Model: Essentia E6G

Category: Supplementary music equipment

Type: Operating instructions

This manual is also suitable for

Download PDF

report

Legrand Essentia E6G Operating instructions

This manual is also suitable for

Legrand Essentia E6G Operating instructions

Related papers

Other documents