Make sure to read the Important Precautions before using the product.
Keep the User's Guide(CD) in an accessible place for future reference.
See the label attached on the product and give the information to your
dealer when you ask for service.
LSM1850
LSM2150
User’s Guide
ENG:ENG 06-3-20 上午10:37 页 1
1
Important Precautions
This unit has been engineered and manufactured to ensure your personal safety, however
improper use may result in potential electrical shock or fire hazards. In order to allow the
proper operation of all safeguards incorporated in this display, observe the following basic rules
for its installation, use, and servicing.
On Safety
Use only the power cord supplied with the unit. In case you use another power cord, make
sure that it is certified by the applicable national standards if not being provided by the
supplier. If the power cable is faulty in any way, please contact the manufacturer or the
nearest authorized repair service provider for a replacement.
The power supply cord is used as the main disconnection device. Ensure that the socket-
outlet is easily accessible after installation.
Operate the display only from a power source indicated in the specifications of this manual or
listed on the display. If you are not sure what type of power supply you have in your home,
consult with your dealer.
Overloaded AC outlets and extension cords are dangerous. So are frayed power cords and
broken plugs. They may result in a shock or fire hazard. Call your service technician for
replacement.
As long as this unit is connected to the AC wall outlet, it is not disconnected from the AC
power source even if the unit is turned off.
Do not Open the Display:
There are no user serviceable components inside.
There are Dangerous High Voltages inside, even when the power is OFF.
Contact your dealer if the display is not operating properly.
To Avoid Personal Injury :
Do not place the display on a sloping shelf unless properly secured.
Use only a stand recommended by the manufacturer.
Do not drop an object on or apply impact to the product. Do not throw any toys or objects
on the product screen.
It can cause injury to human, problem to product and damage the display.
To Prevent Fire or Hazards:
Always turn the display OFF if you leave the room for more than a short period of time.
Never leave the display ON when leaving the house.
Keep children from dropping or pushing objects into the display's cabinet openings. Some
internal parts carry hazardous voltages.
Do not add accessories that have not been designed for this display.
When the display is to be left unattended for an extended period of time, unplug it from the
wall outlet.
In the presence of thunder and lightning, never touch the power cord and signal cable
because it can be very dangerous. It can cause electric shock.
ENG:ENG 06-3-20 上午10:37 页 1
2
Important Precautions
On Installation
Do not allow anything to rest upon or roll over the power cord, and do not place the display
where the power cord is subject to damage.
Do not use this display near water such as near a bathtub, washbowl, kitchen sink, laundry
tub, in a wet basement, or near a swimming pool.
Displays are provided with ventilation openings in the cabinet to allow the release of heat
generated during operation. If these openings are blocked, built-up heat can cause failures
which may result in a fire hazard. Therefore, NEVER:
Block the bottom ventilation slots by placing the display on a bed, sofa, rug, etc.
Place the display in a built-in enclosure unless proper ventilation is provided.
Cover the openings with cloth or other material.
Place the display near or over a radiator or heat source.
Do not rub or strike the Active Matrix LCD with anything hard as this may scratch, mar, or
damage the Active Matrix LCD permanently.
Do not press the LCD screen with your finger for a long time as this may cause some
afterimages.
Some dot defects may appear as Red, Green or Blue spots on the screen. However, this will
have no impact or effect on the display performance.
If possible, use the recommended resolution to obtain the best image quality for your LCD
display. If used under any mode except the recommended resolution, some scaled or
processed images may appear on the screen. However, this is characteristic of the fixed-
resolution LCD panel.
Leaving a fixed image on the screen for a long time may cause damage to the
screen and cause image burn-in. Make sure to use a screen saver on the product.
Burn-in and related problems are not covered by the warranty on this product.
Do not shock or scratch the front and sides of the screen with metallic objects.
Otherwise, it may cause damage to the screen.
Make sure the panel faces forward and hold it with both hands to move. If you
drop the product, the damaged product can cause electric shock or fire. Contact
an authorized the service center for repair.
Avoid high temperatures and humidity.
ENG:ENG 06-3-20 上午10:37 页 2
3
Important Precautions
On Cleaning
Unplug the display before cleaning the face of the display screen.
Use a slightly damp (not wet) cloth. Do not use an aerosol directly on the display screen
because over-spraying may cause electrical shock.
When cleaning the product, unplug the power cord and scrub gently with a soft cloth to
prevent scratching. Do not clean with a wet cloth or spray water or other liquids directly
onto the product. An electric shock may occur. (Do not use chemicals such as benzene,
paint thinners or alcohol)
Spray water onto a soft cloth 2 to 4 times, and use it to clean the front frame; wipe in one
direction only. Too much moisture may cause staining.
On Repacking
Do not throw away the carton and packing materials. They make an ideal container in
which to transport the unit. When shipping the unit to another location, repack it in its
original material.
On Disposal (Only , Hg lamp used LCD Monitor)
The fluorescent lamp used in this product contains a small amount of mercury.
Do not dispose of this product with general household waste.
Disposal of this product must be carried out in accordance to the regulations of your local
authority.
ENG:ENG 06-3-20 上午10:37 页 3
4
Accessories
!!! Thank for selecting LGE products !!!
Please make sure the following items are included with your monitor. If any
items are missing, contact your dealer.
User's Guide/Cards
Remote Control/Batteries
RCA Stereo cable
Power Cord
15-pin D-Sub Signal Cable
(To set it up, this signal cable may be
attached to this product before
shipping out.)
NOTE
This accessories may look different from those shown here.
User must use shielded signal interface cables (D-sub 15 pin cable) with ferrite cores to maintain standard
compliance for the product.
ENG:ENG 06-3-20 上午10:37 页 4
Audio Cable (PC)
ENTER
1 2 3
4 5 6
7 8 9
0
CH
VOL VOL
CH
TV/PC
MUTE FCR
A.PROGMTS
MEMORY/ERASE
CAPTION
INPUT
POWER
MENU REVIEW
SLEEP
APC DASP
ARC/
*
5
Before Connecting to the PC
Stand Installation
Before setting up the product, ensure that the power supply, the computer system,
and other attached devices is turned off.
1
2
3
Carefully place the product screen side
down on a cushioned surface that will
protect product and screen from damage.
Insert the stand base into the product
Attach the monitor to the Stand Base
by turning the screw to the right.
* Turn the screw by using the screw
handle
Screw
ENG:ENG 06-3-20 上午10:37 页 5
6
Before Connecting to the PC
Detaching Stand
Before setting up the product, ensure that the power supply, the computer system,
and other attached devices is turned off.
1
2
3
Place the set screen side down on a
cushion or soft cloth.
Detach the monitor to the Stand
Base by turning the screw to the left.
Turn the screw by using the screw handle
4
Pull the stand base.
5
ENG:ENG 06-3-20 上午10:37 页 6
7
Before Connecting to the PC
Before setting up the product, ensure that the power supply, the computer system,
and other attached devices is turned off.
Positioning your display
1. Adjust the position of the panel in various ways for maximum comfort.
Tilt Range
Locking Device
Use this locking cable
(This has to be purchased
separately if required.
) to prevent theft.
Theft prevention locking device
-5°
15°
ENG:ENG 06-3-20 上午10:37 页 7
8
Before Connecting to the PC
WALL MOUNT:HORIZONTAL INSTALLATION
For proper ventilation,allow a clearance of 10 cm on each side and from the wall. Detailed installation
instructions are available from your dealer,see the optional Tilt Wall Mounting Bracket Installation and
Setup Guide.
10 cm
10 cm
10 cm
10 cm
10 cm
ENG:ENG 06-3-20 上午10:37 页 8
9
Name and Function of the Parts
Name of the Remote Control Buttons
ID
POWER
RGB
HDMI
DVI VIDEO1
MENU RETURN
VIDEO2
MUTE
*
OK
1. Take out the battery cap.
2. Insert the batteries with correct polarity (+/-).
3. Close the battery cap.
• Dispose of used batteries in the recycle bin to prevent
environmental pollution.
Inserting batteries into remote control.
AAA Type
ID
Input ID.
POWER
Turn the monitor on or off.
RGB PC,HDMI,DVI,VIDEO1,VIDEO2
Select input sources.
NOTE : In case of weak
stereo sound signals, with
stereo or Nicam stereo
transmission, select mono
reception.
MENU
Use this button to enter the On Screen Display menu.
MUTE
Switches the sound on or off.
RETURN
Return one step.
Button
Able to change channel.
OK Button
Use when functional adjustment is completed.Double press the OK
button, then Auto Config.(Only RGB PC input)
*
There is not a function which is supported.
Number buttons
Used for input ID.
ENG:ENG 06-3-20 上午10:37 页 9
10
Name and Function of the Parts
Rear View
AC IN
AC IN
L
AUD
R
V
IDEO1
IO1
DVI-D
H
DMI
O
UT IN
L
RGB
AUDIO IN
AUD
V
IDEO2
(
RGB/DVI)
R
IO2
Power Connector : Connect the power cord.
HDMI Digital Signal Connector
DVI Digital Signal Connector
AV Sound Jack(AUDIO Input)
AV Input / Output terminal
RGB Analog Signal Connector
RGB, DVI Sound Jack : Connect to the
jack in the PC sound card.
ENG:ENG 06-3-20 上午10:37 页 10
1111
Connecting to your PC
First of all, see if the computer, product and the peripherals are turned off.
Then, connect the signal input cable.
Connecting with the D-Sub signal input cable.
Rear side of the product.
Connecting to External Devices
Macintosh Adapter (Not included)
Use the standard Macintosh adapter since an
incompatible adapter is available in the market.
(Different signaling system)
1.
Audio cable
Connecting with the DVI signal input cable.
A
B
2.
Rear side of the product
.
Rear side of the product.
Rear side of the product.
Connect the audio cable.
•
Make sure to check the sound card connection terminal in the PC before connecting to the product.
If the PC sound card supports both Speaker Out and Line Out, change it to Line Out by setting the jumper
or the PC application. (For more details, refer to the sound card user’s guide.)
- Speaker Out : The terminal connected to the speaker that is not equipped with an amplifier.
- *Line Out : The terminal connected to the speaker equipped with an amplifier.
If Audio Out in the PC sound card has only Speaker Out, reduce the PC volume. This product is integrated
with an amplifier.
AC IN
AC IN
L
AUD
R
VIDEO1
IO1
DVI-D
HDMI
O
UT IN
L
RGB
AUDIO IN
AUD
VIDEO2
(RGB/DVI)
R
IO2
(Not included)
ENG:ENG 06-3-20 上午10:37 页 11
12
• Directly connect to a grounded power outlet on the wall or a power bar with a ground wire.
Note
Turn on the PC.
2
1
Rear side of the product.
Connect the power cord.
Select an input signal.
Press the input source button on the remote control to select the input signal.
Or, press the INPUT button at the bottom of the product.
Turn on power by pressing the
power button on the product.
Power button
•
Select RGB PC
3.
4.
5.
Each time you press the Input button it will change to VIDEO1 VIDEO2 RGB PC
DVI HDMI.
If nothing is inputted for several seconds the screen will automatically move to the selected menu.
Connecting to External Devices
A B
•
Select DVI
Input
OK
VIDEO1
VIDEO2
RGB PC
DVI
HDMI
Input
OK
VIDEO1
VIDEO2
RGB PC
DVI
HDMI
Input
OK
VIDEO1
VIDEO2
RGB PC
DVI
HDMI
Input
OK
VIDEO1
VIDEO2
RGB PC
DVI
HDMI
Input
OK
VIDEO1
VIDEO2
RGB PC
DVI
HDMI
Picture
OK RETURN
Picture Mode
Colour Temperature
XD
Advanced
Aspect Ratio
Picture Reset
Screen
Vivid
Standard
Cinema
Sport
Game
User1
User2
Picture
OK RETURN
Cool
Medium
Warm
User
User2
OK RETURN
Backlight
Contrast
Brightness
Colour
Sharpness
Tint
20
90
50
50
50
50
Audio
OK RETURN
Sound Mode
Speaker
Clear Voice
Standard
Music
Cinema
Sport
Game
User
Time
OK RETURN
Clock
Off Time
On Time
Sleep Timer
Auto sleep
Audio
OK RETURN
Sound Mode
Speaker
Off
On
User
OK RETURN
0.1 0.5 1.5 5.0 10
kHz
User
OK RETURN
Red
Green
Blue
0
0
0
S
creen
OK RETURN
A
uto Config.
Manual Config.
Resolution
R
eset
Picture Mode
Colour Temperature
XD
Advanced
Aspect Ratio
Picture Reset
Screen
Picture
OK RETURN
9300K
6500K
sRGB
User
Picture Mode
Colour Temperature
XD
Advanced
Aspect Ratio
Picture Reset
Screen
Picture
OK RETURN
Auto
Manual
Picture Mode
Colour Temperature
XD
Advanced
Aspect Ratio
Picture Reset
Screen
Picture
OK RETURN
To Set
Picture Mode
Colour Temperature
XD
Advanced
Aspect Ratio
Picture Reset
Screen
Picture
OK RETURN
Picture Mode
Colour Temperature
XD
Advanced
Aspect Ratio
Picture Reset
Screen
16:9
4:3
Picture
OK RETURN
Picture Mode
Volume
30
Colour Temperature
XD
Advanced
Aspect Ratio
Picture Reset
Screen
To Set
P
icture
OK RETURN
Picture Mode
Colour Temperature
XD
Advanced
Aspect Ratio
P
icture Reset
Screen
To Set
To Set
:
Option
OK RETURN
Language
Key Lock
ISM Method
SET ID
DDC-CI
Power Indicator
Factory Reset
To Set
Language
OK RETURN
LSM1850
LSM2150
Auto in progress
For opimal display change
resolution to 1360 X 768
Auto in progress
For opimal display change
resolution to 1920 X 1080
Original
4:3
16:9
14:9
Zoom1
Zoom2
MODE
ARC
English
Español
Suomi
Русский
Chinese
Deutsch
Italiano
Português
Ελληνικά
Japan
Français
Svenska
Polski
УКРАЇНСЬКА
Korea
Input
OK
VIDEO1
VIDEO2
RGB PC
DVI
HDMI
Input
OK
VIDEO1
VIDEO2
RGB PC
DVI
HDMI
Input
OK
VIDEO1
VIDEO2
RGB PC
DVI
HDMI
Input
OK
VIDEO1
VIDEO2
RGB PC
DVI
HDMI
Input
OK
VIDEO1
VIDEO2
RGB PC
DVI
HDMI
Picture
OK RETURN
Picture Mode
Colour Temperature
XD
Advanced
Aspect Ratio
Picture Reset
Screen
Vivid
Standard
Cinema
Sport
Game
User1
User2
Picture
OK RETURN
Cool
Medium
Warm
User
User2
OK RETURN
Backlight
Contrast
Brightness
Colour
Sharpness
Tint
20
90
50
50
50
50
Audio
OK RETURN
Sound Mode
Speaker
Clear Voice
Standard
Music
Cinema
Sport
Game
User
Time
OK RETURN
Clock
Off Time
On Time
Sleep Timer
Auto sleep
Audio
OK RETURN
Sound Mode
Speaker
Off
On
User
OK RETURN
0.1 0.5 1.5 5.0 10
k
Hz
User
OK RETURN
Red
Green
Blue
0
0
0
Screen
OK RETURN
Auto Config.
Manual Config.
Resolution
R
eset
Picture Mode
Colour Temperature
XD
Advanced
Aspect Ratio
Picture Reset
Screen
Picture
OK RETURN
9300K
6500K
sRGB
User
Picture Mode
Colour Temperature
XD
Advanced
Aspect Ratio
Picture Reset
Screen
Picture
OK RETURN
Auto
Manual
Picture Mode
Colour Temperature
XD
Advanced
Aspect Ratio
Picture Reset
Screen
Picture
OK RETURN
To Set
Picture Mode
Colour Temperature
XD
Advanced
Aspect Ratio
Picture Reset
Screen
Picture
OK RETURN
Picture Mode
Colour Temperature
XD
Advanced
Aspect Ratio
Picture Reset
Screen
16:9
4:3
Picture
OK RETURN
Picture Mode
Volume
30
Colour Temperature
XD
Advanced
Aspect Ratio
Picture Reset
Screen
To Set
Picture
OK RETURN
Picture Mode
Colour Temperature
XD
Advanced
Aspect Ratio
P
icture Reset
Screen
To Set
To Set
:
Option
OK RETURN
Language
Key Lock
ISM Method
SET ID
DDC-CI
Power Indicator
Factory Reset
To Set
Language
OK RETURN
LSM1850
LSM2150
Auto in progress
For opimal display change
resolution to 1360 X 768
Auto in progress
For opimal display change
resolution to 1920 X 1080
Original
4:3
16:9
14:9
Zoom1
Zoom2
MODE
ARC
English
Español
Suomi
Русский
Chinese
Deutsch
Italiano
Português
Ελληνικά
Japan
Français
Svenska
Polski
УКРАЇНСЬКА
Korea
ENG:ENG 06-3-20 上午10:37 页 12
13
Select an input signal.
Press the input source button on the remote control to select the input signal.
Or, press the INPUT button at the bottom of the product.
When connecting with VIDEO1.
• Select VIDEO1
A
When connecting with VIDEO2.
• Select VIDEO2
* Before connecting the VIDEO, you
must connect the BNC convertor first.
B
2.
Connecting to External Devices
•
Connect the input terminal with a proper colour match.
Connect the video/audio cable as shown in the figure below and then connect the power
cord.
Connecting to VCR/DVD
VCR/DVD
Rear side of the Product
1.
RCA Cable
(Not included)
Each time you press the Input button it will change to VIDEO1 VIDEO2 RGB PC
DVI HDMI.
If nothing is inputted for several seconds the screen will automatically move to the selected menu.
Input
OK
VIDEO1
VIDEO2
RGB PC
DVI
HDMI
Input
OK
VIDEO1
VIDEO2
RGB PC
DVI
HDMI
Input
OK
VIDEO1
VIDEO2
RGB PC
DVI
HDMI
Input
OK
VIDEO1
VIDEO2
RGB PC
DVI
HDMI
Input
OK
VIDEO1
VIDEO2
RGB PC
DVI
HDMI
Picture
OK RETURN
Picture Mode
Colour Temperature
XD
Advanced
Aspect Ratio
Picture Reset
Screen
Vivid
Standard
Cinema
Sport
Game
User1
User2
Picture
OK RETURN
Cool
Medium
Warm
User
User2
OK RETURN
Backlight
Contrast
Brightness
Colour
Sharpness
Tint
20
90
50
50
50
50
Audio
OK RETURN
Sound Mode
Speaker
Clear Voice
Standard
Music
Cinema
Sport
Game
User
Time
OK RETURN
Clock
Off Time
On Time
Sleep Timer
Auto sleep
Audio
OK RETURN
Sound Mode
Speaker
Off
On
User
OK RETURN
0.1 0.5 1.5 5.0 10
kHz
User
OK RETURN
Red
Green
Blue
0
0
0
Screen
OK RETURN
Auto Config.
Manual Config.
Resolution
Reset
Picture Mode
Colour Temperature
XD
Advanced
Aspect Ratio
Picture Reset
Screen
Picture
OK RETURN
9300K
6500K
sRGB
User
Picture Mode
Colour Temperature
XD
Advanced
Aspect Ratio
Picture Reset
Screen
Picture
OK RETURN
Auto
Manual
Picture Mode
Colour Temperature
XD
Advanced
Aspect Ratio
Picture Reset
Screen
Picture
OK RETURN
To Set
Picture Mode
Colour Temperature
XD
Advanced
Aspect Ratio
Picture Reset
Screen
Picture
OK RETURN
Picture Mode
Colour Temperature
XD
Advanced
Aspect Ratio
Picture Reset
Screen
16:9
4:3
Picture
OK RETURN
Picture Mode
Volume
30
Colour Temperature
XD
Advanced
Aspect Ratio
Picture Reset
Screen
To Set
Picture
OK RETURN
Picture Mode
Colour Temperature
XD
Advanced
Aspect Ratio
Picture Reset
Screen
To Set
To Set
:
Option
OK RETURN
Language
Key Lock
ISM Method
SET ID
DDC-CI
Power Indicator
Factory Reset
To Set
Language
OK RETURN
LSM1850
LSM2150
Auto in progress
For opimal display change
resolution to 1360 X 768
Auto in progress
For opimal display change
resolution to 1920 X 1080
Original
4:3
16:9
14:9
Zoom1
Zoom2
MODE
ARC
English
Español
Suomi
Русский
Chinese
Deutsch
Italiano
Português
Ελληνικά
Japan
Français
Svenska
Polski
УКРАЇНСЬКА
Korea
Input
OK
VIDEO1
VIDEO2
RGB PC
DVI
HDMI
Input
OK
VIDEO1
VIDEO2
RGB PC
DVI
HDMI
Input
OK
VIDEO1
VIDEO2
RGB PC
DVI
HDMI
Input
OK
VIDEO1
VIDEO2
RGB PC
DVI
HDMI
Input
OK
VIDEO1
VIDEO2
RGB PC
DVI
HDMI
Picture
OK RETURN
Picture Mode
Colour Temperature
XD
Advanced
Aspect Ratio
Picture Reset
Screen
Vivid
Standard
Cinema
Sport
Game
User1
User2
Picture
OK RETURN
Cool
Medium
Warm
User
User2
OK RETURN
Backlight
Contrast
Brightness
Colour
Sharpness
Tint
20
90
50
50
50
50
Audio
OK RETURN
Sound Mode
Speaker
Clear Voice
Standard
Music
Cinema
Sport
Game
User
Time
OK RETURN
Clock
Off Time
On Time
Sleep Timer
Auto sleep
Audio
OK RETURN
Sound Mode
Speaker
Off
On
User
OK RETURN
0.1 0.5 1.5 5.0 10
kHz
User
OK RETURN
Red
Green
Blue
0
0
0
Screen
OK RETURN
Auto Config.
Manual Config.
Resolution
Reset
Picture Mode
Colour Temperature
XD
Advanced
Aspect Ratio
Picture Reset
Screen
Picture
OK RETURN
9300K
6500K
sRGB
User
Picture Mode
Colour Temperature
XD
Advanced
Aspect Ratio
Picture Reset
Screen
Picture
OK RETURN
Auto
Manual
Picture Mode
Colour Temperature
XD
Advanced
Aspect Ratio
Picture Reset
Screen
Picture
OK RETURN
To Set
Picture Mode
Colour Temperature
XD
Advanced
Aspect Ratio
Picture Reset
Screen
Picture
OK RETURN
Picture Mode
Colour Temperature
XD
Advanced
Aspect Ratio
Picture Reset
Screen
16:9
4:3
Picture
OK RETURN
Picture Mode
Volume
30
Colour Temperature
XD
Advanced
Aspect Ratio
Picture Reset
Screen
To Set
Picture
OK RETURN
Picture Mode
Colour Temperature
XD
Advanced
Aspect Ratio
Picture Reset
Screen
To Set
To Set
:
Option
OK RETURN
Language
Key Lock
ISM Method
SET ID
DDC-CI
Power Indicator
Factory Reset
To Set
Language
OK RETURN
LSM1850
LSM2150
Auto in progress
For opimal display change
resolution to 1360 X 768
Auto in progress
For opimal display change
resolution to 1920 X 1080
Original
4:3
16:9
14:9
Zoom1
Zoom2
MODE
ARC
English
Español
Suomi
Русский
Chinese
Deutsch
Italiano
Português
Ελληνικά
Japan
Français
Svenska
Polski
УКРАЇНСЬКА
Korea
ENG:ENG 06-3-20 上午10:37 页 13
14
Connecting to External Devices
Connect the HDMI cable as shown in the below figure and then connect the power
cord.
When watching HDMI from the DVD/Set-top Box
Select an input signal.
Press the input source button on the remote control to select the input signal.
Or, press the INPUT button at the bottom of the product.
2.
1.
R
GB OUTPUT
AUDIO
R
GB IN (PC)
AUDIO
DVI OUTPUT
D
V
I
O
U
T
P
U
T
A
U
D
I
O
R
L
A
UDIO
D
VI OUTPUT HDMI OUTPUT
AUDIO IN
(RGB/DVI)
A
UD
I
O
I
N
(
R
G
B/
DV
I
)
A
U
DI
O
I
N
(
R
G
B
/
D
V
I
)
D
V
I
O
U
T
P
U
T
A
U
D
I
O
R
L
D
V
I
-
D
I
N
(
P
C
)
A
UD
I
O
I
N
(
R
G
B
/
D
V
I
)
A
UD
I
O
I
N
(
R
G
B/
D
V
I
)
H
D
M
I
I
N
H
D
M
I
I
N
H
D
M
I
I
N
H
D
M
I
I
N
RGB OUTPUT
AUDIO
RGB IN (PC)
A
UDIO
D
VI OUTPUT
D
V
I
O
U
T
P
U
T
A
U
D
I
O
R
L
AUDIO
DVI OUTPUT HDMI OUTPUT
AUDIO IN
(RGB/DVI)
A
UD
I
O
I
N
(
R
G
B
/
D
V
I
)
A
UD
I
O
I
N
(
R
G
B/
D
V
I
)
D
V
I
O
U
T
P
U
T
A
U
D
I
O
R
L
D
V
I
-
D
I
N
(
P
C
)
A
UD
I
O
I
N
(
R
G
B/
DV
I
)
A
U
DI
O
I
N
(
RG
B
/
D
V
I
)
H
D
M
I
I
N
H
D
M
I
I
N
H
D
M
I
I
N
H
D
M
I
I
N
[Rear side of the Product]
[Rear side of the Product]
[Set-top Box/DVD]
[Set-top Box/DVD]
HDMI cable
(not included)
HDMI to DVI cable
(not included)
RCA Stereo cable
•
Select HDMI
• HDMI Input does not support PC mode.If it is connected PC,the screen may not be displayed properly.
Note
Each time you press the Input button it will change to VIDEO1 VIDEO2 RGB PC
DVI HDMI.
If nothing is inputted for several seconds the screen will automatically move to the selected menu.
Input
OK
V
IDEO1
V
IDEO2
RGB PC
D
VI
H
DMI
Input
OK
VIDEO1
VIDEO2
RGB PC
DVI
HDMI
Input
OK
V
IDEO1
VIDEO2
R
GB PC
DVI
HDMI
Input
OK
VIDEO1
VIDEO2
RGB PC
DVI
HDMI
Input
OK
VIDEO1
VIDEO2
RGB PC
DVI
HDMI
Picture
OK RETURN
Picture Mode
Colour Temperature
X
D
Advanced
Aspect Ratio
Picture Reset
Screen
Vivid
Standard
Cinema
Sport
Game
User1
User2
Picture
OK RETURN
C
ool
M
edium
W
arm
User
User2
OK RETURN
Backlight
C
ontrast
Brightness
Colour
Sharpness
Tint
20
90
5
0
50
50
5
0
Audio
OK RETURN
Sound Mode
Speaker
Clear Voice
Standard
M
usic
Cinema
Sport
Game
User
Time
OK RETURN
Clock
Off Time
On Time
Sleep Timer
Auto sleep
Audio
OK RETURN
Sound Mode
S
peaker
O
ff
O
n
User
OK RETURN
0.1 0.5 1.5 5.0 10
kHz
User
OK RETURN
Red
Green
Blue
0
0
0
Screen
OK RETURN
Auto Config.
Manual Config.
Resolution
Reset
Picture Mode
Colour Temperature
XD
Advanced
Aspect Ratio
Picture Reset
Screen
Picture
OK RETURN
9300K
6500K
sRGB
User
Picture Mode
Colour Temperature
XD
Advanced
Aspect Ratio
Picture Reset
Screen
Picture
OK RETURN
Auto
Manual
Picture Mode
Colour Temperature
XD
Advanced
Aspect Ratio
Picture Reset
Screen
Picture
OK RETURN
To Set
Picture Mode
Colour Temperature
XD
Advanced
Aspect Ratio
Picture Reset
Screen
Picture
OK RETURN
Picture Mode
Colour Temperature
XD
Advanced
Aspect Ratio
Picture Reset
Screen
16:9
4:3
Picture
OK RETURN
Picture Mode
Volume
30
Colour Temperature
XD
Advanced
Aspect Ratio
Picture Reset
Screen
To Set
Picture
OK RETURN
Picture Mode
Colour Temperature
XD
Advanced
Aspect Ratio
Picture Reset
Screen
To Set
To Set
:
Option
OK RETURN
Language
Key Lock
ISM Method
SET ID
DDC-CI
Power Indicator
Factory Reset
To Set
Language
OK RETURN
LSM1850
LSM2150
Auto in progress
For opimal display change
resolution to 1360 X 768
Auto in progress
For opimal display change
resolution to 1920 X 1080
Original
4:3
16:9
14:9
Zoom1
Zoom2
MODE
ARC
English
Español
Suomi
Русский
Chinese
Deutsch
Italiano
Português
Ελληνικά
Japan
Français
Svenska
Polski
УКРАЇНСЬКА
Korea
ENG:ENG 06-3-20 上午10:37 页 14
15
To arrange cables using cable management
1.
Tie cables together with a cable management as shown in the illustration.
Cable management
15
ENG:ENG 06-3-20 上午10:37 页 15
16
Name of the Buttons in the Screen Adjustment Unit
• Adjust the volume.
• Adjust the up and down.
•
Use
this
button to select an icon or adjust the setting in the OSD screen.
OSD Select/Adjust Button
Adjusting the Screen
• Use this button to turn the product on and off.
Power Button
P
ower
OK Button
• OK button is usually used in choosing the MENU.
When there is no MENU on the screen pushing the OK button will
give the information about the current input source.
• Use this button to show/hide the OSD (On Screen Display) menu
screen.
MENU Button
Input
OK
V
IDEO1
V
IDEO2
RGB PC
D
VI
HDMI
I
nput
OK
V
IDEO1
VIDEO2
RGB PC
D
VI
HDMI
I
nput
OK
V
IDEO1
VIDEO2
R
GB PC
DVI
H
DMI
Input
OK
VIDEO1
VIDEO2
R
GB PC
D
VI
HDMI
Input
OK
VIDEO1
VIDEO2
RGB PC
DVI
HDMI
Picture
OK RETURN
P
icture Mode
Colour Temperature
XD
A
dvanced
Aspect Ratio
Picture Reset
Screen
Vivid
Standard
Cinema
Sport
Game
U
ser1
User2
Picture
OK RETURN
Cool
Medium
Warm
User
U
ser2
OK RETURN
Backlight
Contrast
Brightness
Colour
Sharpness
Tint
20
90
50
50
50
50
Audio
OK RETURN
S
ound Mode
Speaker
C
lear Voice
Standard
Music
C
inema
Sport
Game
User
Time
OK RETURN
Clock
Off Time
On Time
Sleep Timer
Auto sleep
Audio
O
KRETURN
Sound Mode
Speaker
Off
On
U
ser
OK RETURN
0
.1 0.5 1.5 5.0 10
kHz
User
OK RETURN
Red
Green
Blue
0
0
0
Screen
OK RETURN
Auto Config.
Manual Config.
Resolution
Reset
Picture Mode
Colour Temperature
XD
A
dvanced
Aspect Ratio
P
icture Reset
Screen
Picture
OK RETURN
9
300K
6500K
sRGB
User
Picture Mode
Colour Temperature
XD
Advanced
Aspect Ratio
Picture Reset
Screen
Picture
OK RETURN
Auto
Manual
Picture Mode
Colour Temperature
XD
Advanced
Aspect Ratio
Picture Reset
Screen
Picture
OK RETURN
To Set
Picture Mode
Colour Temperature
XD
Advanced
Aspect Ratio
Picture Reset
Screen
Picture
OK RETURN
Picture Mode
Colour Temperature
XD
Advanced
Aspect Ratio
Picture Reset
Screen
16:9
4:3
Picture
OK RETURN
Picture Mode
Volume
30
Colour Temperature
XD
Advanced
Aspect Ratio
Picture Reset
Screen
To Set
Picture
OK RETURN
Picture Mode
Colour Temperature
XD
Advanced
Aspect Ratio
Picture Reset
Screen
To Set
To Set
:
Option
OK RETURN
Language
Key Lock
ISM Method
SET ID
DDC-CI
Power Indicator
Factory Reset
To Set
Language
OK RETURN
LSM1850
LSM2150
Auto in progress
For opimal display change
resolution to 1360 X 768
Auto in progress
For opimal display change
resolution to 1920 X 1080
Original
4:3
16:9
14:9
Zoom1
Zoom2
MODE
ARC
English
Español
Suomi
Русский
Chinese
Deutsch
Italiano
Português
Ελληνικά
Japan
Français
Svenska
Polski
УКРАЇНСЬКА
Korea
16
ENG:ENG 06-3-20 上午10:37 页 16
17
Name of the Buttons in the Screen Adjustment Unit
VIDEO1 CVBS
VIDEO2 CVBS
RGB PC D-Sub analog signal
DVI DVI Digitalsignal
HDMI HDMI Digital signal
INPUT Button
Each time you press the Input button it will change to VIDEO1 VIDEO2 RGB PC
DVI HDMI.
If nothing is inputted for several seconds the screen will automatically move to the selected menu.
17
Adjusting the Screen
Input
OK
VIDEO1
VIDEO2
RGB PC
DVI
HDMI
I
nput
OK
V
IDEO1
V
IDEO2
R
GB PC
D
VI
H
DMI
Input
OK
VIDEO1
VIDEO2
RGB PC
DVI
HDMI
Input
OK
VIDEO1
VIDEO2
RGB PC
DVI
HDMI
Input
OK
VIDEO1
VIDEO2
RGB PC
DVI
HDMI
Picture
OK RETURN
P
icture Mode
Colour Temperature
XD
Advanced
Aspect Ratio
Picture Reset
S
creen
Vivid
Standard
C
inema
Sport
Game
User1
User2
Picture
OK RETURN
Cool
Medium
W
arm
User
U
ser2
OK RETURN
Backlight
Contrast
B
rightness
Colour
Sharpness
T
int
2
0
90
50
5
0
50
50
Audio
OK RETURN
S
ound Mode
Speaker
C
lear Voice
Standard
Music
Cinema
Sport
Game
U
ser
Time
OK RETURN
Clock
Off Time
On Time
Sleep Timer
Auto sleep
Audio
OK RETURN
Sound Mode
Speaker
O
ff
On
U
ser
OK RETURN
0
.1 0.5 1.5 5.0 10
kHz
User
OK RETURN
Red
Green
Blue
0
0
0
Screen
OK RETURN
Auto Config.
Manual Config.
Resolution
Reset
Picture Mode
Colour Temperature
XD
Advanced
Aspect Ratio
Picture Reset
Screen
Picture
OK RETURN
9300K
6500K
sRGB
User
Picture Mode
Colour Temperature
XD
Advanced
Aspect Ratio
Picture Reset
Screen
Picture
OK RETURN
Auto
Manual
Picture Mode
Colour Temperature
XD
Advanced
Aspect Ratio
Picture Reset
Screen
Picture
OK RETURN
To Set
Picture Mode
Colour Temperature
XD
Advanced
Aspect Ratio
Picture Reset
Screen
Picture
OK RETURN
Picture Mode
Colour Temperature
XD
Advanced
Aspect Ratio
Picture Reset
Screen
16:9
4:3
Picture
OK RETURN
Picture Mode
Volume
30
Colour Temperature
XD
Advanced
Aspect Ratio
Picture Reset
Screen
To Set
Picture
OK RETURN
Picture Mode
Colour Temperature
XD
Advanced
Aspect Ratio
Picture Reset
Screen
To Set
To Set
:
Option
OK RETURN
Language
Key Lock
ISM Method
SET ID
DDC-CI
Power Indicator
Factory Reset
To Set
Language
OK RETURN
LSM1850
LSM2150
Auto in progress
For opimal display change
resolution to 1360 X 768
Auto in progress
For opimal display change
resolution to 1920 X 1080
Original
4:3
16:9
14:9
Zoom1
Zoom2
MODE
ARC
English
Español
Suomi
Русский
Chinese
Deutsch
Italiano
Português
Ελληνικά
Japan
Français
Svenska
Polski
УКРАЇНСЬКА
Korea
ENG:ENG 06-3-20 上午10:37 页 17
18
OSD(On Screen Display)
The OSD function enables you to adjust the screen status conveniently since it provides graphical
presentation.
Note
OSD Menu
Icon Function Description
Adjusts the screen status according to the circumstances.
Adjusts the timer options.
Adjusts the audio options.
Adjusts screen brightness, contrast and colour that you prefer.
18
Input
OK
V
IDEO1
V
IDEO2
R
GB PC
D
VI
H
DMI
I
nput
OK
VIDEO1
VIDEO2
RGB PC
DVI
HDMI
I
nput
OK
VIDEO1
VIDEO2
RGB PC
DVI
HDMI
Input
OK
V
IDEO1
VIDEO2
RGB PC
DVI
HDMI
Input
OK
V
IDEO1
VIDEO2
RGB PC
DVI
HDMI
Picture
OK RETURN
Picture Mode
Colour Temperature
XD
Advanced
Aspect Ratio
Picture Reset
Screen
Vivid
Standard
Cinema
Sport
Game
User1
User2
Picture
OK RETURN
Cool
M
edium
Warm
U
ser
User2
OK RETURN
Backlight
Contrast
B
rightness
Colour
Sharpness
T
int
2
0
90
50
50
50
50
Audio
OK RETURN
Sound Mode
Speaker
Clear Voice
Standard
Music
Cinema
Sport
Game
User
Time
OK RETURN
C
lock
Off Time
On Time
S
leep Timer
Auto sleep
A
udio
OK RETURN
S
ound Mode
Speaker
Off
O
n
User
OK RETURN
0.1 0.5 1.5 5.0 10
kHz
U
ser
OK RETURN
Red
Green
Blue
0
0
0
Screen
OK RETURN
Auto Config.
Manual Config.
Resolution
Reset
P
icture Mode
Colour Temperature
X
D
Advanced
Aspect Ratio
Picture Reset
Screen
P
icture
OK RETURN
9300K
6500K
sRGB
User
Picture Mode
C
olour Temperature
XD
Advanced
Aspect Ratio
P
icture Reset
Screen
P
icture
OK RETURN
Auto
Manual
Picture Mode
Colour Temperature
XD
Advanced
Aspect Ratio
Picture Reset
Screen
P
icture
OK RETURN
To Set
P
icture Mode
Colour Temperature
X
D
Advanced
Aspect Ratio
Picture Reset
Screen
Picture
OK RETURN
Picture Mode
Colour Temperature
XD
Advanced
Aspect Ratio
Picture Reset
Screen
16:9
4:3
Picture
OK RETURN
Picture Mode
Volume
3
0
Colour Temperature
XD
Advanced
Aspect Ratio
Picture Reset
Screen
To Set
Picture
OK RETURN
Picture Mode
Colour Temperature
XD
Advanced
Aspect Ratio
Picture Reset
Screen
To Set
To Set
:
Option
OK RETURN
Language
Key Lock
ISM Method
S
ET ID
DDC-CI
Power Indicator
Factory Reset
To Set
L
anguage
OK RETURN
LSM1850
LSM2150
Auto in progress
For opimal display change
resolution to 1360 X 768
Auto in progress
For opimal display change
resolution to 1920 X 1080
Original
4:3
16:9
14:9
Zoom1
Zoom2
MODE
ARC
English
Español
Suomi
Русский
Chinese
Deutsch
Italiano
Português
Ελληνικά
Japan
Français
Svenska
Polski
УКРАЇНСЬКА
Korea
Picture
Audio
Time
Option
Adjusting the Screen
ENG:ENG 06-3-20 上午10:37 页 18
19
How to adjust the OSD (On Screen Display) screen
How to adjust the screen automatically
Press the MENU Button, then the main menu of the OSD will appear.
To access a control, use the Buttons.
When the icon you want becomes highlighted, press the OK Button.
Use the Buttons to adjust the item to the desired level.
Accept the changes by pressing the OK Button.
Exit the OSD by pressing the RETURN Button.
1
2
3
4
5
6
•
Use the remote control to adjust the OSD screen.
Pops up
t
he menu
screen
Return to
l
ast step.
M
ove where
y
ou want to
a
djust
M
ove where
y
ou want to
a
djust
Select a
menu icon
Select a
menu icon
Save
adjustment
Adjust the status
PR
P
R
OK
VOL
VOL
PR
PR
OK
VOL
VOL
M
ENU
M
E
N
U
OK OK
RETURN
OK
OK
OK
OK
OK
OK
19
Press the OK button twice in the PC analog signal. Then optimal screen settings will be selected
that fit into the current mode. If adjustment is not satisfactory, you can adjust the screen manually.
[For PC Analog signal]
Input
OK
VIDEO1
VIDEO2
RGB PC
DVI
HDMI
Input
OK
VIDEO1
VIDEO2
RGB PC
DVI
HDMI
Input
OK
V
IDEO1
VIDEO2
RGB PC
DVI
HDMI
Input
O
K
VIDEO1
VIDEO2
RGB PC
DVI
HDMI
Input
OK
VIDEO1
VIDEO2
RGB PC
DVI
HDMI
Picture
OK RETURN
Picture Mode
Colour Temperature
XD
A
dvanced
A
spect Ratio
Picture Reset
Screen
V
ivid
Standard
C
inema
Sport
Game
U
ser1
User2
Picture
OK RETURN
C
ool
Medium
Warm
U
ser
User2
OK RETURN
B
acklight
C
ontrast
B
rightness
Colour
S
harpness
T
int
2
0
90
50
5
0
5
0
5
0
Audio
OK RETURN
Sound Mode
Speaker
Clear Voice
Standard
Music
C
inema
S
port
Game
User
Time
OK RETURN
C
lock
O
ff Time
O
n Time
S
leep Timer
A
uto sleep
Audio
OK RETURN
S
ound Mode
Speaker
Off
On
User
OK RETURN
0
.1 0.5 1.5 5.0 10
kHz
User
OK RETURN
Red
G
reen
Blue
0
0
0
Screen
OK RETURN
Auto Config.
Manual Config.
Resolution
Reset
P
icture Mode
C
olour Temperature
XD
Advanced
Aspect Ratio
P
icture Reset
S
creen
Picture
OK RETURN
9300K
6
500K
s
RGB
User
Picture Mode
Colour Temperature
X
D
A
dvanced
A
spect Ratio
Picture Reset
Screen
Picture
OK RETURN
Auto
Manual
Picture Mode
Colour Temperature
XD
Advanced
Aspect Ratio
Picture Reset
Screen
Picture
OK RETURN
To Set
Picture Mode
Colour Temperature
XD
Advanced
Aspect Ratio
Picture Reset
Screen
Picture
OK RETURN
Picture Mode
Colour Temperature
XD
Advanced
Aspect Ratio
Picture Reset
Screen
16:9
4:3
Picture
OK RETURN
Picture Mode
Volume
30
Colour Temperature
XD
Advanced
Aspect Ratio
Picture Reset
Screen
To Set
Picture
OK RETURN
Picture Mode
Colour Temperature
XD
Advanced
Aspect Ratio
Picture Reset
Screen
To Set
To Set
:
Option
OK RETURN
L
anguage
Key Lock
ISM Method
SET ID
DDC-CI
Power Indicator
Factory Reset
To Set
Language
OK RETURN
LSM1850
LSM2150
Auto in progress
For opimal display change
resolution to 1360 X 768
Auto in progress
For opimal display change
resolution to 1920 X 1080
Original
4:3
16:9
14:9
Zoom1
Zoom2
MODE
ARC
English
Español
Suomi
Русский
Chinese
Deutsch
Italiano
Português
Ελληνικά
Japan
Français
Svenska
Polski
УКРАЇНСЬКА
Korea
Adjusting the Screen
ENG:ENG 06-3-20 上午10:37 页 19
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
NEC MultiSync P521 User manual
-
-
-
SMART Technologies S521 User manual
-
-
NEC MultiSync® P402 PG (Protective Glass) Owner's manual
-
NEC V422-AVT User manual
-
-
NEC V651 User manual
-