Broan-NuTone E6430SS User manual

Category
Cooker hoods
Type
User manual

This manual is also suitable for

SPECIFICATION SHEET
REFERENCE QTY. REMARKS Project
Location
Architect
Engineer
Contractor
Submitted By Date
90M 99044444E
E64 SERIES
RANGE HOOD
Broan-NuTone LLC Hartford, Wisconsin www.broan.com 800-558-1711
Broan-NuTone Canada Mississauga, Ontario www.broan.ca 877-896-1119
For domestic
cooking only.
HVI-2100 CERTIFIED RATINGS comply with new
testing technologies and procedures prescribed
by the Home Ventilating Institute, for off-the-shelf
products, as they are available to consumers. Product
performance is rated at 0.1 in. static pressure, based
on tests conducted in a state-of-the-art test laboratory.
Sones are a measure of humanly-perceived loudness,
based on laboratory measurements.
Styling is fresh and modern, yet designed to easily
complement popular pro-style, high performance cooking
products.
A complete installation requires several optional components.
Refer to page 2 when planning your installation.
FEATURES
HOOD:
Widths available - 30” to 48” in 6” increments
Stainless steel, 22 gauge, type 430, #4 brush
Stainless steel baffle filters with handles - easily accessible,
dishwasher safe
2-level cooktop lighting (30” & 36” wide hoods = 2 lamps,
42” & 48” wide hoods = 3 lamps. Uses 50W, GU10 halogen
lamps. Bulbs not included.)
Solid-state, variable speed blower control with speed
memory
Exclusive, Heat Sentry™ turns blower ON to HIGH speed
when excess heat is detected
3¼” x 10” ducting - single blower (600 cfm)
4½” x 18½” ducting - dual blower (1200 cfm)
For indoor use only.
NON-DUCTED RECIRCULATING KIT:
ANKE60 Series (Optional)
Stainless steel, 22 gauge, type 430, #4 brush
Available for hood widths up to 48”
Charcoal filters included
Replacement charcoal filters:
- Service Part # SV08343 - round filter retail pack
BACKSPLASH:
RMP Series (Optional)
Widths - 30” to 48” in 6” increments
Stainless steel, 22 gauge, type 430, #4 brush - protects back
wall and wipes clean easily
Two, removable, dual position condiment storage shelves
SPECIFICATION:
Single Blower
120 VAC, 60 Hz, 5.5 Amps
600 cfm, sound level no greater than 13.5 sones
(high speed, vert. & horiz. discharge)
150 cfm, 1.5 sones (working speed, vert. & horiz. discharge)
Dual Blower
120 VAC, 60 Hz, 9.0 Amps
1200 cfm, sound level no greater than 14.5 sones
(high speed, vert. & horiz. discharge)
350 cfm, 2.0 sones (working speed, vert. & horiz. discharge)
Models
E6430SS
E6436SS
E6442SS
E6448SS
Model
E6448TSS
E64 SERIES RANGE HOOD SYSTEM
INTERNAL BLOWERS
MODEL 437
(HIGH CAPACITY ROOF CAP)
MODEL 441
(10” ROUND
WALL CAP)
MODEL 647
(7” ROUND
WALL CAP)
MODEL 634
OR 644
(ROOF CAP)
MODEL 643
(8” ROUND
WALL CAP)
MODEL 418
(10” ROUND ADJUSTABLE ELBOW)
MODEL 421
(10” ROUND VERTICAL
IN-LINE DAMPER)
MODEL 410
(10” ROUND DUCT - 2 FT. SECTIONS)
MODEL 415
(7” ROUND
ADJUSTABLE ELBOW)
MODEL 407
(7” ROUND -
2 FT. SECTIONS)
MODEL 412
TRANSITION
(3¼” x 10” TO 7”)
MODEL 639
(3¼” x 10”
WALL CAP)
STANDARD
DUCT
(3¼” x 10”)
MODEL 413
TRANSITION
(3¼” x 10” TO 8”)
STANDARD
DUCT
(8” ROUND)
ADJUSTABLE ELBOW
(8” ROUND)
MODEL 427
(4½” x 18½”
TO 10” ROUND
6” HIGH - LATERAL
MODEL 423
(4½” x 18½”
TO 10” ROUND
VERTICAL
MODEL 424
(4½” x 18½”
TO 10” ROUND -
HORIZ. FRONT/REAR
MODEL 454
(4½” x 18½”
TO 10” ROUND -
HORIZ. RIGHT
MODEL 453
(4½” x 18½”
TO 10” ROUND -
HORIZ. LEFT
ADAPTER WITH DAMPER
(3¼” x 10” - SUPPLIED WITH
SINGLE BLOWER HOOD)
SINGLE BLOWER (600 CFM)
DUAL BLOWER (1200 CFM)
48” ONLY
ADAPTER (4½” x 18½” -
SUPPLIED WITH
DUAL BLOWER HOOD)
RMP SERIES BACKSPLASH
(STAINLESS STEEL WALL COVERING
WITH WARMING SHELVES -
OPTIONAL)
RECIRCULATION KIT
ANKE60 SERIES (Optional)
E64 SERIES HOOD
2¼” HIGH
  • Page 1 1
  • Page 2 2

Broan-NuTone E6430SS User manual

Category
Cooker hoods
Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI