2. Hilti
  3. CFS-M BAS

Hilti CFS-M BAS User guide

  • Hello! I am an AI chatbot trained to assist you with the Hilti CFS-M BAS User guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
2119193 A1-04.2015
CFS-M BAS
www.hilti.in
70 mm
3d
Fire Rated Assembly / Assemblage Homolugué
Product:
Produt:
Location:
Endroit:
System #:
Système #:
Tel:
Installed by: Installation Date:
Date d’installation:
Repenetrated by:
Date:
4. Add 2 ½ parts mortar to 1 part water and stir thoroughly.
5. Apply mortar to a depth of 70 mm on top of mineral wool shuttering. 6. Fasten identification plate visibly and ensure seal complies with approval.
Do not apply loads to seal for at least 3 days.
3. Clean penetration and pre-moisten surfaces.
2. Tightly fit mineral wool board of 60 mm thickness and 160 kg/m3 density into
opening, leaving 70 mm to top of opening for mortar. Seal gaps around cables
with FS-One sealant.
1. Provide rebar and wire mesh support arrangement for assembly.
1 2
3 4
5 6
Printed: 14.04.2015 | Doc-Nr: PUB / 5225835 / 000 / 00
/