Titan Fitness T-2 Series 10-in Extension Kit User manual

Titan Fitness
Brand
Titan Fitness
Model
T-2 Series 10-in Extension Kit
Type
User manual

Titan Fitness T-2 Series 10-in Extension Kit expands your workout options by allowing you to perform a variety of exercises while using your T-2 Series power rack or squat stand. Constructed from heavy-duty steel with a durable black powder coat finish, this extension kit includes two 10-inch extension arms, two Φ48 end caps, two end caps 50*2, four weight plate holders (two for each side), and all necessary hardware for assembly. It's easy to install and compatible with all T-2 Series power racks and squat stands, providing a secure and stable platform for your workouts.

Titan Fitness T-2 Series 10-in Extension Kit expands your workout options by allowing you to perform a variety of exercises while using your T-2 Series power rack or squat stand. Constructed from heavy-duty steel with a durable black powder coat finish, this extension kit includes two 10-inch extension arms, two Φ48 end caps, two end caps 50*2, four weight plate holders (two for each side), and all necessary hardware for assembly. It's easy to install and compatible with all T-2 Series power racks and squat stands, providing a secure and stable platform for your workouts.

MPN(s): T2EXT71, T2EXT83
SKU(s): 401209, 401210
UPC(s): 840009213137, 840009213144
2
KEY BOX DESCRIPTION QTY KEY BOX DESCRIPTION
QT
(1) 1 Upright Frame 2
(6)
1 Φ48 End Cap
8
(2) 1 Extended Connecting Frame 2
(7)
1
End Cap □50*2
2
(3) 1 Weight Plate Holder (L) 4
(8)
1 Flat Washer Φ13.5*Φ24*2.5 16
(4) 1 Weight Plate Holder (R) 4
(9)
1 M12 Nut 8
(5) 1 Connecting Frame 1
(10)
1 Hex Bolt M12*75 8
3
KEY
BOX
DESCRIPTION
QTY
KEY
BOX
DESCRIPTION
QT
(1) 1 Upright Frame 2
(6)
1 Φ48 End Cap
8
(2) 1 Extended Connecting Frame 2
(7)
1 End Cap 50*2
2
(3) 1 Weight Plate Holder (L) 4
(8)
1 Flat Washer Φ13.5*Φ24*2.5 16
(4) 1 Weight Plate Holder (R) 4
(9)
1 M12 Nut 8
(5) 1 Connecting Frame 1
(10)
1 Hex Bolt M12*75 8
4
Step 1
Install the Connecting Frame (5) on the Upright frame (1), using Flat Washer
Φ13.5*Φ24*2.5(8), M12 Nut (9) and Hex Bolt M12*75(10).
Connect Extended Connecting Frame (2) and Upright Frame (1), using Flat Washer
Φ13.5*Φ24*2.5(8), M12 Nut (9) and Hex Bolt M12*75(10).
5
Step 2
Insert the Weight Plate Holder L&R (3&4) into the hole on the Upright Frame (1).
6
This concludes the T2EXT Owner’s Manual.
If applicable to your product, make sure to tighten
all nut-and-bolt combinations before use.
Enjoy!
DISCLAIMER
This equipment must be used with care by capable and competent individuals under supervision, if necessary.
The use of any fitness equipment, including this one, involves the potential risk of injury. You accept and assume full
responsibility for any and all injuries, damages (both economic and non-economic), and losses of any type, which may
occur, and you fully and forever release and discharge Titan, its insurers, employees, officers, directors, associates, and
agents from any and all claims, demands, damages, rights of action, or causes of action, present or future, whether the
same be known or unknown, anticipated, or unanticipated, resulting from or arising out of the use of said equipment.
TITAN MAKES NO WARRANTY WHATSOEVER WITH RESPECT TO THE EQUIPMENT, INCLUDING ANY WARRANTY OF
MERCHANTABILITY OR WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE, WHETHER EXPRESS OR IMPLIED BY LAW,
COURSE OF DEALING, COURSE OF PERFORMANCE, USAGE OF TRADE OR OTHERWISE. BUYER ASSUMES ALL LIABILITY IN
USE OF THE EQUIPMENT.
NEED HELP?
CONTACT US FIRST.
1 (800) 605-8241
info@titandistributorsinc.com /
Business Hours: Monday–Friday • 8:00 a.m.–5:00 p.m. (CT)
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6

Titan Fitness T-2 Series 10-in Extension Kit User manual

Titan Fitness
Brand
Titan Fitness
Model
T-2 Series 10-in Extension Kit
Type
User manual

Titan Fitness T-2 Series 10-in Extension Kit expands your workout options by allowing you to perform a variety of exercises while using your T-2 Series power rack or squat stand. Constructed from heavy-duty steel with a durable black powder coat finish, this extension kit includes two 10-inch extension arms, two Φ48 end caps, two end caps 50*2, four weight plate holders (two for each side), and all necessary hardware for assembly. It's easy to install and compatible with all T-2 Series power racks and squat stands, providing a secure and stable platform for your workouts.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents