Euro-Pro Shark Roadster EP732F Owner's manual

Brand: Euro-Pro

Model: Shark Roadster EP732F

Category: Vacuum cleaners

Type: Owner's manual

This manual is also suitable for

Bagless Canister Vacuum

Aspirateurotral_eau

OWNER'S MANUAL

GUIDE DU PROPRIETAIRE

ModelslMod_les °.EP732-EP732F

120V._60Hz,_ 10,3 Amps

EURO.PRO Operat#_g LLC

U.S.: 94 Main Mill Street Door IG Canada: 4400, BoisoFranc

Plattsburgh NY t2901 St-Laurent, QC H4S 1A7

Tel. : 1 (800)798-7398

When using your canister vacuum, basic safety

observed, including the following:

WARNING: To reduce the risk of fire,

electrical shock, or injury: 13

1, Do not leave vacuum cleaner unattended

when it is plugged in. Unplug flora 14

outlet when not in use

2_ To reduce the risk of electric shock - do

not use outdoors or on wet surfaces. Do

not handle plug or vacuum dear_er with 15,

wet hands.

3. Do not allow chi!dren to use as a toy, 16,

Close atter_tion is necessary when used

by or near childlen.

4. Use on_yas descr bed in tibia manual. Use

on_ymanufactu[er's r'ecammended

attachnents, 17,

5, Do not use with damaged cord or phg. Do

not use vacuum clea_'_erif it has been

dropped, damaged, iefl outdoors, or

dropped into water Return applance to

EURO_PRO Operating LLC f_)r 18,

examination, repair or adjustment, 19,

6. Do not put/or carry by card, Do not use

cord as a handle, dose a door on cord, 20_

or pull cord around sbalp edges or

corners. Do not n_n app_ance over cord.

Keep cord away from heated st,daces.

7, Do not uaphg by pulling on cord, Io

unplug grasp the piing, not the cord.

8, Keep hair loose cbthhg fingers, and all 21.

parts of body away from openings arid

"nayng parts

9. Do not pick up hot coaIs, cigarette butts,

T_atchesor any hot smoking, or burning 22

10 Do not pck up hard or sharp objects such 23

as glass, nails, screws coins, etc, 24

1t_ Do not use without f/tars in place

12, Turn off af! controls befo!e plugging or 25.

unptugg ng vacuum cleaner,

precautions should always be

Use extra care when vacuum ng on

stairs

Do not pck up flammable o_

combustible materials (lighter fluid,

gasoline, kerosene etc,) or use in the

presence of expiosive liquids of vapor,

Do not pick up toxic mateda! (chbdne

bleaeh_ ammonia dran cleaner etc,)

Do not use in an enclosed space filled

with vapors !#iver_off by oii based

pants, paint thinner, moth proofing

substances_ flammable dust, or other

explosive or toxic vapors

Always unplug this appl ance before

connecting or disconm_ecthg vacuum

hose. Always hold the plug when

rewinding the power cord Do not aliow

plug to whip whe_ rewinding.

Use only on dry, indoor surfaces.

Do not LISafor any purpose other than

described h this user's guide.

Use only extensiol_ cords UL or cU[_

rated at 15 amperes, Extension cords

rated for less amperage may overheat

Care shot ld be taken to arrange the

cord so that the co_d cannot be pul_ed

or tdpped over.

Do not put any objects nto open ngs.

Do not use wth any opeliny blocked.

Keep flee of dust lint, hair and

anytNny else that may reduce air flow,

Store your appliance indoors in a coo/

dry area.

Keep your work area wel_It.

Do net immerse the vacuum in water

or other iiquids.

Keep end of hose, wands and other

openings away from your face and

For Ho

1 ST

Use Only

I S

1 Rev. 07/05

I On/Off Button

2, Cord Rewind Button

3 Carh4ng Handle

4 Dust Cup (Container)

5. Dust Cup Handle

6 Dust Cup FuH Indicator

7_ Flexible Hose

Telescopic ]ube

9, Air Driven Turbo Brush

I0_ FIoor4o,-carpet Brush

11 Hand Held Ar Driven

Turbo Brush

12. Upholstery Brush

13 Crevice Tool

illustrations may differ from actual product,

120V_ 60Hz,

10,3 Amps

Important: tf the suction opening of the unt, the hose or the chrome telescopic tube

are BLOCKED, switch off the vacuum cleaner and remove the bi:ocking

substance before you start the unit again.

Do not operate the vacuum

cleaner too close to heaters or

Do not pick up anything that s

burning or smoking such as

cigare_es_ matches or hot ashes.

j ¢'

......... :t,

Before {nserting the power pKo_g

nto the wan outlet make sure that

your hands are dry

7_ Do not obstruct the air nlet or

outlet vents.

8 Do not use vacuum cleaner on

Before you star vacuuming,

make sure to remove Jarge or

sharp obiects that might

damage the dust cup filter.

Do not run the vacuum cleaner

over the power cord

When pulling out the power plug

from the wall outJet, pull the p_ug

not the power cord.

Do not use without aH filters in place.

Note: This vacuum cleaner is equ pped

with a pkCg and power cord that retract

automatically, if the cord or pK_g get

damaged, it must be reptaced by a

qualified technician.

Hold the plug when

card Do not aliow the

when rewinding.

Assemb[in_ Your Vacuum Cleaner

Note: Always remove the power plug

from the wall outlet before assembling or

removing accessories,

Attaching the Flexible Hose into

the Vacuum

Connect the fle×ible hose into the air

intake ducL Push in until you hear a

'click", ind cat ng it is n its locked

Air intake

d_ct

To remove the flexMe hose press

inward on lock tabs and slide hose

outward .... >.

to the Telescopic Tube

Push the telescopic tube into the floor

brush as show in the illustration below

S_eo_to Carpe_

Nezzie

the Air Driven Turbo Brush

to the Telescopic Tube

Push the telescopic tube

into the air driven turbo

brush as show in the

illustration.

Fittin_ the Telescopic Tube to

the Curved Wand ! Hose

Push the telescopic tube into the

curved wand I hose extension, as

shown in the illustration below, Make

sure that the telescopic tube _ocks n

Extendin_ the Telescopic Tube

Push forward on

the plastic button

and pull the inner

tube outward.

...............7,!iI¸i! ,

Plastic

Button

Air Driven Turbo Brush

The efficiency of your Air Ddven

[ urbo Brush depends on the br st[e

b_ush rotating at high speed. Strong

air suction is needed to accomplish

this in order to endure that maximum

air suction is maintained, ptease read

the following

. Empty the Dust Cup frequently

during use

• Always TapC!ean" the HEPA

dust cup fi{ter and debris screen

each time the dust cup is

, Ensure that the rotating bdstle

brush s kept free of hair and

° Inspect the turbine regularly to

ensure that the air passage is

free of dirt and debris.

A}r Drlve[_ 'T_rbo

Brush

Hand He_JA# Driven

Turbo B_Jgh

Crevice TooJ and Dustin9 Brush

! Crevice Tool with Brush

For radiators_ crevces, +%_!: -" ....

corners, baseboards and

between cushions

2. . Ister'4 Brush

The dusting brush is used

for the furniture

our Vacuum

Note: Once all attachments are in

place unwind a sufficient length

of cable and insed the plug into

the wall outlet+ A yellow mark on

the power cord shows the ideal

cable length. Don't pull the power

cord beyond the red mark.

I. Insert the power plug into the wall

2. Press the Power On/Off button

located on the unit to turn the

vacuum cleaner "On'.

lo rewind the power cord press the

cord rewind button with your foot

and hold the plug of the power cosd

with your hand to ensure that it

does not whip causing damage or

Oleanin_ the Hand Held Air Driven

Turbo Brush

T_rbine

1 Slide locking latct_ forward then tilt the

top housing of the brush upwards. The

top housing is hinged and will tilt up

approximately 45 ° only

2. Inspect turbine wheel and air passage

for debris andlor blockage. Remove

debris if present

3 Inspect the rotat ng brush for built-up

hair or stdng If present, remove by

carefully cutting with scissors. Avod

damaging or cutting bristles.

4 Once clean, close the top cover of the

turbo brush and slide the locking latch

toward the rear of the brush to lock.

Important: This vacuum cleaner is

equipped with a motor protective

thermostat If for some reason yoz

vacuum overheats the thermostat will

automatically turn the unit off. Should ths

occur, unplug the vacuum from the wal!

outlet and turn off the switch. Empty the

dust cup, "TapClean" the dust cup filter

and check for blockages in hose and

suction inlet. Allow the unit to cool for a

minimum of 45 minimum prior to

resta_ing the unit. To restart, re-plug the

vacuum into the wan socket and turn the

switch back on

Warning: Alwaysunplugtheunit

fromebctricaloutletbefore

removingthe DustCup(container).

1. PushthePowerOn/Offbuttonto

"Off"anddisconnectthepower

cordfromthewa/ioutlet.

2. Liftthe dustcuphandleandliftthe

dustcupcontainerout

3. Ho_ddustcupcontainerovera

wastebasket(garbagecan),push

thedustcuprebasebutt:onto

openthedustcup Disposeofthe

dustinside (Seeillustration

Note: If dust is tightly packed and

d fficu[t t_aremove tap the side of

the dust clip lightly against the

sde of the waste basket (garbage

After you have removed the

Rinseabte "TapClean" HEPA dust

cup filter from the dust cup, separate

the debts screen from .......

the HEPA filter cartr dge

by holding the top rim of

the filter and twisting the

debris screen

counterclockwise to unbck _£

the debts screen from the _'i:/

filter. Then lift the debds

screen to remove t'_Z:/::,....

Rinse the debris screen

under the faucet with

lukewarm water until

clean. AHow to air dry for 24 hours.

Do NOT wash in dishwasher.

: After each Use _Always

remove the Rinseab/e "TapClean"

HEPA Filter from the Dust Cup, then

vigorously "TapC_ean' HEPA Filter until

no more dust can be removed_

_mportant: When "TapClean_ng" the

HEPA liter, hold the HEPA fiffer from the

stem and tap ONLY the top rim aga nst

the side of the waste container. NEVER

tap directly on the pleated folds of the

Stem

4. After you have

emptied the dust

container, hold the

HEPA liter from the

stem and twist it

counter c[ockwise to

release it from the

dust cup conta net,

Pr_S

p Rim

Please Note : The

HEPA Dust Cup

Filter wili stop most of the t niest dust

particles from re_entering the air you

breathe_ [n fact it stops 9997% of all

particles as small as 0.3 microns o many

times smaller than a human hair!!

Because of this incredible fiffration

performance_ the HEPA Dust Cup Filter

wH qu ckly accumulate dirt inside the

white filter foids, many fine dust particles

that are diffcult to see but which will

eventually Mock or reduce your suction

power -if not cleaned properly Clean the

HEPA Filter as described in this section,

then reconnect unit and proceed with

7 Vigorously"TapCban

theHEPADustCu_._

Filteronahard

surfaceuntilnomr_m.

dustisobsewed

fallingoutfrom

betweenthepleats_f

thefilter.See

illustrationat rigm

PLEASE NOTE. The white pleated

filter material in the HEPA Dust Cup

Filter will d scolor over time -This is

NORMAL and wilt NO7 affect the

perfomsance of the filter, tf the HEPA

Dust Cup Filter

is properly

after each use

does not return

to 100% then

we suggest that

the HEPA filter

be _TapCteaned"

vigorously until

no more dust

£g A

V?!asb

reduced

Allow 24

hours fo_ dB_ing before

rep_acng n unit,

can be removed then rinsed under

the faucet and allowed to air dry for 24

hours before refitting into the vacuum

(Fig, A) This should be done once a

month or when _uctlon appears to

be redt,_ced.

[m#o_ant: The suction hole must be

open, flee of any obstruct ons at all

times. Otherwise, the motor will overheat

and could become damaged

8. Reassemble the debris screen back

onto the HEPA filter cartddge_

9, To replace the HEPA

filter back into the

hold the filter by the

sbm and insed it up

into the dust cup

container making

sure that the top rm

of the fiIter fits onto

the top of the dust cup container and

twist it clockwise to lock in p_ace,

Ensure that the filter assembly is

completely seated nside the dust

cup container

Important; Do NOT use the HEPA filter

cadridge without the debrs screen in

10. ReqnstaH dust cup nto the vacuum

and re-attach hose

& Cleaninq the

Pre-Motor Filter

The preomotor fiiter is bcated

underneath the dust cup conta ner_

This is a rinseable filter but should be

replaced every six (6)months. Never

operate the vacuum without ALL the

filters n place.

° Push the Power Or#Off button to the

'_Off' position and d scannect the

power cord from the wait outtet

Remove the dust cup container.

• Remove the preomotor filter and rinse

in k_kewarm water, Iet dry compbtely,

Do not use a hair dryer to dr}/t. Air

dry only

o When fiite is completely dry, replace

pre_motor fi_ter back into the unit and

replace the dust cup container.

Thepostmotorfilteris a washablefiiter

butshouldbereplacedeverysix(6)

monthsdependingon usage Never

operatethevacuumwthoutALLthe

filtersinp_ace

, Pushthe PowerOn/Offbuttontothe

"Qff_'positionanddsconnectthe

powe_cordfromthewalloutleL

° Thepostmotorfilters locatedon the

rearofthevacuum Removethefilter

cover.

o Removethefiltergrillandtakeoutthe

Rinseinlukewarmwater _etar dry

complete/y_Donotuseawashing

machineto rinsethefi/ter_Donotuse

ahairdryerto dryit Airdryonlyfor24

o Whenfilteriscomptetetydry,replace

postmotorfi}terbackintothefiltergrill

andreplacebackintetheunit

PleaseNete:TheHEPADustCup

Filteriswashable, it should however,

be replacedeverysix(6)monthsto

ensurepeakperformanceofyour

vacuum

ThePostMotorFilterandPre.-Motor

FilterarewashabieTheyshould

howeverbe replacedeverysix(6)

monthsto ensurepeakperformanceof

Im_ Make surethatALL fitters

arecompletelydrybeforereqnsta/ling

backn thehandvacuum_

t_AHfiltersshoutdbechecked

regularlyforsignsofdamage,

preferablyaftereachcleaningtask Tie

filtersmustbereptacedimmediatelyif

theybecomedamaged Always

disconnectthevacuumfromthe

eiectricaloutletwhencheckingthe

Thisappliancewas inspectedthoroughlyandwasin goodoperatingconditionwhenit

wasshippedfromthefactory.Ifaminor'problemoccurs,itusuallycan besolvedquite

easilywhenthecauseisfound.Therefore,thischecklistisprovidedforyour

PROBLEM

Cleaner Wont Run

Cleaner Won't Pick

Air How Restricted

Wth Attachment

Use Sound Changes

POSSIBLE CAUSE

1 Not firmly pk_gged in.

2. No ebctricity in wal_outbL

3. On/Off switch not turned on.

4. Thermal prote(ter tripped.

5. Bbwn fuse/tripped breaker.

! Fut_or c_oggeddust cup

2 Cbgged nozde el dust cup port

3 Clogged hose.

4. Hole in hosm

5_ Hose not inseded ful_y

6 Motor protection system

activated.

_EPA fitter needs cleaning or

9 Debts screen needs cleaning

1 Attachment use restricts airflow.

2. New carpet trimmings cogg ng

POSSIBLE SOLUTION

1 Plug infirmly push on/off

switch to on.

2. Check fuse or breaker

3, Push on/off switch to on

4. Reset the_ma_prateetor.

5. Reset circuit b_eaker or

C_eandust cup.

Remove obstruction

Replace hose

Push hose in securely_

Reset thermal protec_or_

Clean / change filte_s.

Clean or replace HEPA filter.

Ctean debris screen.

1_ Check attachme_ t

2 P,emove obstruction

TO ORDER REPLACEMENT FILTERS

HEPA Filter Item # XSH732

for Models EP732 o EP732F

Call 1 (800) 798W398

Monday to Frday 8:30 AM. _ 5:00 PM. Eastern Standard Time

visit our website: w'_¢_ sharkvac corn

FOR TECHNICAL SUPPORT

for Models EP732 - EP732F

Call 1 (800)798-7398

Monday to Friday 8:30 AM, _ 5:00 P.M Eastern Standard ]me

Hease Note:

The HEPA Dust Cup Filter may be washed, We recommend that this be done once a

month or when suction appears reduced They should however be replaced every

three (3) to sx (6) months, depending on the amount of use to ensure peak

performance of your vacuum

To wash your HEPA Dust Cup Filter, hold filter cartridge by frame flange and rnse

under a tap until all observable dirt has been remove& Some disco/oration of the

HEPA filter material may occur the is normal and will not affect the filters

perforrsance. W#en finished, shake off excess water. Do NOT wash in dishwasher It

is mportant that when you wash the HEPA dust cup filter, you allow it to dry

COI_aPLETELY before usng it again. We recommend 24 hours to air dry. DO NOT

DRY iN DRYER.

IMPORTANT: The Pre-.Motor fiiter and Post Motor filter should be rep!aced every 8

months or sooner if requi_'ed It is mportant that when you wash the HEPA dust cup

filter, pre_motor filter or the exhaust flte_ you albw them to d[y COIVIPLETELY before

using agan. We recommend 24 hours to air dry DO NOT DRY IN DRYER

AII fiffers should be checked regularly for signs of damage, preferable after each

clearing task. The filters must be replaced immediately if they become damaged.

AIways disconnect the vacuum from the electrical outtet when checking the filters.

Models

EP732

EP732F

EURO-PRO Opera#rig LLC warrants this prod_._ctto be flee from defects mate a_ and

workmaeshp for a period of one (I) year from the date of the original purchase This warranty

applies only to norma} domestic household use

Should year appliance fal to operate propedy while }n use under normal household conditions

within the one (1) year warranty period return the complete appliance and accessories, freight

prepaid to EURO-PRO Operating LLC at the address given below If the appliance }s found to be

defective in matedal or workmanship EURO_PRO Operating LLC will repair or rep{aco t free of

charge, Proof of purchase date and $1995 to cover the cast of return sMpping and handling must

be included. *

US: EURO-PRO Operating LLC 94 Main Mill Street Door 16 Piattsburgh N,Y 12901

Canada: EURO_PRO Operating LLC 4400 Bois Franc St [ aurent, Quebec, H4S 1A7

Nomdurab}e parts including, without limitation rotating brushes and e_ectrical parts which normaiIy

require replacement are spec fical[y exck_ded from warranty,

The Habi!ity of EURO.PRO Operating LLC is timited sob_y to the cost of the repair or replacement

of the unit at our option. This warranty does eat cover normal wear of parts and does not apply to

any unit that has been tampered with or used far commercial purposes This _imited warranty does

not cover damage caused by misuse, abuse, nagtigent handing or damage due to faulty

packaging or mishandiing in transit, Thia warranty does not cover damage or defects caused by or

resulting from damages from shipping or repairs, service or a_terations to the product o_ any of its

parts which have been performed by a _'epair person not authorized by EUROoPRO Operating

LLC.

This warranty is extended to the origina_ purchaser of the unit and excludes aH other iegal and/or

conventional warranties _fhe responsibility of EURO-PRO Operating LLC if any, is _mited to the

specific obtigatfons e×press_y assumed by t under the te_ms of the _imited warranty In ne event s

EURO.PRO Operating LLC liaMe far incidonta! or consequential dareages of any nature

whatsoever Some states do not permit the exc}usion or limitation of incdental or consequent al

damages so the above may nat apply to you,

This warranty gives you specific bga[ rights, and you may a_sohave other dghts which vary flora

state to state or province to province.

•_mportant: Carefully pack Item to avoid damage ta ahlpp_ng,Be cure to include proof of

purchase gate and to attach tag to _tem before pacMng with your name, complete addrecs

and phone number with a note g_vtag purchase informaUoe, mode_ number and what you

bereave is the problem with item. We _ecommond you _nsoro the package (as damage in

shtpp_ng _a not covered by your warranty}. _ark the o[_tcide of your package "ATTENTION

CUSTOMER SERV_CE*L We are constantly striving to improve our products, therefore the

apeciflcatfenc coetained herein are subject to chal'_ge without notice.

OWNERSHIP REGISTRATION CARD

FOR CANADIAN CONSUMERS ONLY

Please fill out and real the product registration card within ten (I0) days of purchase, The

regiahation wil_enaMe us to contact you in the untikely event of a product aafety notification By

returning this card you acknowledge to have read and understood the instructions fer use, and

warnings set farlh in the accompanying instructions.

Canada: EURO.PRO Operating LLC, 4400 Bos Franc, Stq_.aurent QL@bec H4S 1A7

_ode[s EP732 _ EP732F

Date p_rchacod Name of store

Owaor'c name

Address Pray, Postal Code

Pdnted in China 1t

Page is loading ...

I Commutateur marche/arr@t 8,

Bouton d'enrou_age du corrJon 9

Poign6e de transport I0.

4 CeupeHe {apoussi_re 11

Poignee de la coupeHe

hd cateur de coupeHe p_eine

B[osse tuI_bo actionn6e a i'air

Brosse plancher _ tapis

Brosse a main turbo

12, Brosse _ meubles

13 Suceur plat

* Les illustrations peuvent diff_rer du produit r6el.

Tension : 120 V 60 Hz.

Puissance : 10,3 amps

Page is loading ...

Euro-Pro Shark Roadster EP732F Owner's manual

Brand: Euro-Pro

Model: Shark Roadster EP732F

Category: Vacuum cleaners

Type: Owner's manual

This manual is also suitable for

Download PDF

report

in other languages

français: Euro-Pro Shark Roadster EP732F Le manuel du propriétaire

Euro-Pro Shark Roadster EP732F Owner's manual

This manual is also suitable for

Euro-Pro Shark Roadster EP732F Owner's manual

in other languages

Related papers

Other documents