ET1100

Moen ET1100 User manual

  • Hello! I've reviewed the Moen electronic toilet specification document, which details the features and installation requirements for the ET1100 and ET1300 models. This document provides information on advanced cleaning features, including bidet functionality, heated seat, warm air dryer, and remote control capabilities. I’m ready to help with any questions you might have about this product.
  • What is the minimum water pressure required for installation?
    What are the dimensions of the toilet?
    What is the maximum temperature of the dryer air?
    What is the water temperature range?
    What is the length of the power cord?
Rev. 03/23
DESCRIPTION
• Electronic toilet with bidet cleansing and remote control
• Comfort height seat with elongated design
• Low profile, modern style
INSTALLATION REQUIREMENTS
- Required: 120V AC power outlet on a 10A minimum circuit
- Requires minimum dynamic (flowing) water pressure of 11 psi
(0.08MPa) and a maximum static (non-flowing) water pressure of
109 psi (0.75MPa)
• Requires toilet rough-in to be 12” (305mm) from
center of drain hole to water supply line
PRODUCT FEATURES
• Auto-clean wash cycle, oscillates nozzle for
90 seconds; Air Dryer for 4 minutes
• Auto-flush and remote flush options
• UV Technology for enhanced cleanliness
• Autosensing Nightlight
• Endless, instantaneous, warm water (inline water heater)
• Pre-wets bowl for added cleanliness
• Self-cleaning options with replaceable nozzles
• Dual nozzles offer front and rear cleansing
• Pulsating and oscillating cleanse
• Nozzle positions adjustable with 5 positions
• Hot & Cold Massage option for additional relief
• Water pressure and temperature adjustability
• Aerated spray to provide a total clean
• Water Temperature, 4 levels: Cold, Warm, Hot, Off
• Warm air dryer with temperature control with Flash Drying
• Air Deodorizer helps reduce odors
• Hygienic and heated seat with temperature control and sensor
• Seat Temperature, 4 levels: Cold, Warm, Hot, Off
• Manual side knob and remote control
• Remote control activation including remote
opening / closing of seat and lid (ET1300)
• Pressure assisted flush
• Auto energy saver
• On/off button
• Soft-close lid and seat
FLOW
• 1.0 gpf (3.8 lpf)
STANDARDS
• Third party certified by Intertek:
• ASME A112.4.2 / CSA B45.16 Personal hygiene
devices for water closets, which includes conformity
to IAPMO / ANSI Z124.5 plastic toilet seats
• ASME A112.19.2/CSA B45.1 Ceramic plumbing fixtures
• CSA C22.2 no. 68 Motor-operated appliances
(household and commercial)
• CSA C22.2 no. 64 Household cooking and liquid-heating appliances
• UL 1431 standard for personal hygiene and health care appliances
• ADA Compliant
• Third party certified to WaterSense®
WARRANTY
• Limited 3 year warranty against leaks and finish
defects to the original consumer purchaser
• 1 year warranty if used in commercial installations
Visit www.moen.com/support for complete details and limitations
Moen®
eToilet
MODELS: ET1100, ET1300
Dimensions: 27” (686mm) x 15-3/4” (400mm) x 18-1/2” (470mm)
Gross Weight: 50.11 lb.
Rated Power Usage: 1050W
Length of Power Cord: 4.0 ft.
Nozzle Flow Rates (Rear & Front): ≈20.29oz/min
Water Temperature: from Ambient to 102.2°F
Heated Seat Temperature: from Ambient to 102.2°F
Dryer: Air Temperature: 131°F
Dryer: Air Volume: ≈0.25m³/min
Water Supply Pressure: 0.07MPA to 0.75MPA
Water Supply Temperature: 41°F to 104°F
Ambient Temperature: 41°F to 104°F
Maximum Performance Rating: 350G
PRODUCT DETAILS
1-800-BUY-MOEN
www.moen.com
SPECIFICATIONS
Rev. 03/23
27”
(686mm)
18-7/16”
(468mm)
14-3/8”
(366mm)
16”
(406mm) 12-1/8”
(308mm)
8”
(203mm)
3”
(76mm)
5”
(127mm)
1-800-BUY-MOEN
www.moen.com
CRITICAL DIMENSIONS DO NOT SCALE
SPECIFICATIONS
Product Dimensions
14-15/16”
(380mm)
7-1/2”
(191mm)
2”
(51mm)
ROUGH DIMENSIONS AND INSTALL
10-14”
(254mm-356mm)
10-14”
(254mm-356mm)
6-8”
(152mm-203mm)
*6-8”
(152mm-203mm)
12”
(305mm) * Check local codes
SPECIFICATIONS
Product Dimensions
Rev. 03/23 1-800-BUY-MOEN
www.moen.com
CRITICAL DIMENSIONS DO NOT SCALE
/