GE Profile PTS700RSNSS User guide

Type
User guide

This manual is also suitable for

PTS700RSN
GE Profile 30" Smart Built-In Convection Single Wall Oven
with Right-Hand Side-Swing Doors
Listed by
Underwriters
Laboratories
For answers to your GE Profile or GE Appliances product
questions, visit our website at geappliances.com or call
GE Answer Center® Service, 800.626.2000.
Specification Revised 1/22
ADA
COMPLIANT
DIMENSIONS AND INSTALLATION INFORMATION (IN INCHES)
Cabinet 30"
A - Overlap of oven at top of cutout 1"
B - Overlap of oven other side of edge of cutout 11/16"
C - Overlap of oven at bottom of cutout 1-1/4"
Oven
D - Install depth 23-1/2"
E - Overall height with trim 28-5/8"
F - Overall width 29-3/4"
Cutout width
28-1/2" MIN.
28-5/8" MAX.
B
A
C
2 x 4 or
equivalent runners
level with bottom of cutout
and flush with sides of cutout
or solid bottom floor.
Suitable
bracing
to support
runners (must support 220 lbs.)
C
L
Cutout height
27-1/4" MIN.
27-5/16" MAX.
Recommended
cutout location
from the floor
32-1/2"
30''
F
E
Conduit
48"
Cutout depth
23-1/2" MIN
Door Swing Depth
31-1/8" (77.8 cm) MIN.
22" to
bottom of
junction box
Junction box
may be located in
adjacent cabinet
9-1/2" MAX.
D
NOTE: Allow
1/4" (0.64 cm)
clearances from
side edges of
oven door
JTS3000DNBB, JTS3000DNWW, JTS3000ENES,
JTS3000SNSS, JTS5000BNTS, JTS5000DNBB,
JTS5000DNWW, JTS5000ENES, JTS5000FNDS,
JTS5000SNSS, PTS7000BNTS, PTS7000FNDS,
PTS7000SNSS, PTS700LSNSS, PTS700RSNSS
Cabinet 30"
A - Overlap of oven at top of cutout 1"
B - Overlap of oven other side of edge of cutout 11/16"
C - Overlap of oven at bottom of cutout 1-1/4"
Oven
D - Install depth 23-1/2"
E - Overall height with trim 28-5/8"
F - Overall width 29-3/4"
Cutout width
28-1/2" MIN.
28-5/8" MAX.
B
A
C
2 x 4 or
equivalent runners
level with bottom of cutout
and flush with sides of cutout
or solid bottom floor.
Suitable
bracing
to support
runners (must support 220 lbs.)
C
L
Cutout height
27-1/4" MIN.
27-5/16" MAX.
Recommended
cutout location
from the floor
32-1/2"
30''
F
E
Conduit
48"
Cutout depth
23-1/2" MIN
Door Swing Depth
31-1/8" (77.8 cm) MIN.
22" to
bottom of
junction box
Junction box
may be located in
adjacent cabinet
9-1/2" MAX.
D
NOTE: Allow
1/4" (0.64 cm)
clearances from
side edges of
oven door
JTS3000DNBB, JTS3000DNWW, JTS3000ENES,
JTS3000SNSS, JTS5000BNTS, JTS5000DNBB,
JTS5000DNWW, JTS5000ENES, JTS5000FNDS,
JTS5000SNSS, PTS7000BNTS, PTS7000FNDS,
PTS7000SNSS, PTS700LSNSS, PTS700RSNSS
Cabinet 30"
A - Overlap of oven at top of cutout 1"
B - Overlap of oven other side of edge of cutout 11/16"
C - Overlap of oven at bottom of cutout 1-1/4"
Oven
D - Install depth 23-1/2"
E - Overall height with trim 28-5/8"
F - Overall width 29-3/4"
Cutout width
28-1/2" MIN.
28-5/8" MAX.
B
A
C
2 x 4 or
equivalent runners
level with bottom of cutout
and flush with sides of cutout
or solid bottom floor.
Suitable
bracing
to support
runners (must support 220 lbs.)
C
L
Cutout height
27-1/4" MIN.
27-5/16" MAX.
Recommended
cutout location
from the floor
32-1/2"
30''
F
E
Conduit
48"
Cutout depth
23-1/2" MIN
Door Swing Depth
31-1/8" (77.8 cm) MIN.
22" to
bottom of
junction box
Junction box
may be located in
adjacent cabinet
9-1/2" MAX.
D
NOTE: Allow
1/4" (0.64 cm)
clearances from
side edges of
oven door
JTS3000DNBB, JTS3000DNWW, JTS3000ENES,
JTS3000SNSS, JTS5000BNTS, JTS5000DNBB,
JTS5000DNWW, JTS5000ENES, JTS5000FNDS,
JTS5000SNSS, PTS7000BNTS, PTS7000FNDS,
PTS7000SNSS, PTS700LSNSS, PTS700RSNSS
Cabinet 30"
A - Overlap of oven at top of cutout 1"
B - Overlap of oven other side of edge of cutout 11/16"
C - Overlap of oven at bottom of cutout 1-1/4"
Oven
D - Install depth 23-1/2"
E - Overall height with trim 28-5/8"
F - Overall width 29-3/4"
Cutout width
28-1/2" MIN.
28-5/8" MAX.
B
A
C
2 x 4 or
equivalent runners
level with bottom of cutout
and flush with sides of cutout
or solid bottom floor.
Suitable
bracing
to support
runners (must support 220 lbs.)
C
L
Cutout height
27-1/4" MIN.
27-5/16" MAX.
Recommended
cutout location
from the floor
32-1/2"
30''
F
E
Conduit
48"
Cutout depth
23-1/2" MIN
Door Swing Depth
31-1/8" (77.8 cm) MIN.
22" to
bottom of
junction box
Junction box
may be located in
adjacent cabinet
9-1/2" MAX.
D
NOTE: Allow
1/4" (0.64 cm)
clearances from
side edges of
oven door
JTS3000DNBB, JTS3000DNWW, JTS3000ENES,
JTS3000SNSS, JTS5000BNTS, JTS5000DNBB,
JTS5000DNWW, JTS5000ENES, JTS5000FNDS,
JTS5000SNSS, PTS7000BNTS, PTS7000FNDS,
PTS7000SNSS, PTS700LSNSS, PTS700RSNSS
KW R ATING
240V 4.2
208V 3.2
BREAKER SIZE
240V 20 Amps
208V 20 Amps
NOTE: Wall coverings, countertops and
cabinets surrounding the wall oven must
be able to withstand a temperature of up to
200°F (94°C).
NOTE: If the cabinet in which the wall oven
is installed does not have a solid bottom, two
braces or runners must be installed to support
the weight of the oven. The runners and
braces must support up to 400 lbs (181 kg).
NOTE: Door handle protrudes 3" from door
face. Cabinets and drawers on adjacent 45°
and 90° walls should be placed to avoid
interference with the handle.
ATTENTION INSTALLER: Electric wall
ovens are NOT approved for installation with
a plug and receptacle. They must be hard
wired into an approved junction box.
IMPORTANT: Before installing, consult
installation instructions packed with product
for current dimensional data.
Dimension and installation information are shown in inches.
For answers to your GE Profile or GE Appliances product questions, visit our website
at geappliances.com or call GE Answer Center® Service, 800.626.2000.
PTS700RSN
GE Profile 30" Smart Built-In Convection Single Wall Oven
with Right-Hand Side-Swing Doors
Specification Revised 1/22
DIMENSIONS AND INSTALLATION INFORMATION (IN INCHES)
NOTE: 30" Single electric wall ovens are approved
for installation below a countertop, and below
certain gas and electric cooktops. Refer to the
Approved Combinations Matrix available at
geappliances.com for specific information.
NOTE: 30" Single electric wall ovens are approved
for installation above 27" and 30" warming drawers.
ATTENTION INSTALLER: Electric wall ovens
are NOT approved for installation with a plug
and receptacle. They must be hard wired into an
approved junction box.
IMPORTANT: Before installing, consult
installation instructions packed with ALL products
for current dimensional and combination data.
INSTALLATION BELOW A COOKTOP
Gas or Electric Cooktops May Be Installed Over This Oven.
See Cooktop Installation Instructions for Cutout Size.
See Label on Top of Oven for Approved Models.
240V/208V
Junction Box
Location
(junction box may
be in adjacent
cabinet)
Gas or Electric Connections for Gas
Cooktop Must be Located in an Adjacent
Accessible Location to the Right
Top and/or Side Fillers
May Be Necessary if
Unit is Positioned
Between Existing
Cabinets. Be Sure
They Are Attached
Securely, Since They
Will Anchor the Oven
in the Cabinet.
30.5" (77.5 cm) 30" models
27" (68.58 cm) 27" models
2 1/2" min. (6.4 cm)
31 1/4" min.
(79.4 cm)
Cooktop
Wall Oven
SIDE OVEN
IMPORTANT:
Maintain a minimum
distance of 31 1/4"
from the top surface
of the countertop to
the wall oven
platform to ensure
that the cooktop and
wall oven do not
interfere with each
other (see picture).
NOTE: One cooktop may be centered over either
oven in the side-by-side installation.
2" (5.1 cm) min.
Cooktop
22" (55.9 cm) min.
Above Support
Platform
36" (91.4 cm)
Countertop
Height
Must Match
Toekick Height
24" (61 cm)
4" (10.2 cm)
Toekick
25" (63.5 cm)
MUST SUPPORT 220 lbs. (99 kg) FOR SINGLE OVENS
Center Line Center Line
3/4" (1.9 cm)
Support Platform
Required
Cutout – observe
all dimensions and
requirements
Cutout – observe
all dimensions and
requirements
Side-bySide Installations
Install two ovens in separate cutouts.
Gas or Electric Cooktops May Be Installed Over This Oven.
See Cooktop Installation Instructions for Cutout Size.
See Label on Top of Oven for Approved Models.
240V/208V
Junction Box
Location
(junction box may
be in adjacent
cabinet)
Gas or Electric Connections for Gas
Cooktop Must be Located in an Adjacent
Accessible Location to the Right
Top and/or Side Fillers
May Be Necessary if
Unit is Positioned
Between Existing
Cabinets. Be Sure
They Are Attached
Securely, Since They
Will Anchor the Oven
in the Cabinet.
30.5" (77.5 cm) 30" models
27" (68.58 cm) 27" models
2 1/2" min. (6.4 cm)
31 1/4" min.
(79.4 cm)
Cooktop
Wall Oven
SIDE OVEN
IMPORTANT:
Maintain a minimum
distance of 31 1/4"
from the top surface
of the countertop to
the wall oven
platform to ensure
that the cooktop and
wall oven do not
interfere with each
other (see picture).
NOTE: One cooktop may be centered over either
oven in the side-by-side installation.
2" (5.1 cm) min.
Cooktop
22" (55.9 cm) min.
Above Support
Platform
36" (91.4 cm)
Countertop
Height
Must Match
Toekick Height
24" (61 cm)
4" (10.2 cm)
Toekick
25" (63.5 cm)
MUST SUPPORT 220 lbs. (99 kg) FOR SINGLE OVENS
Center Line Center Line
3/4" (1.9 cm)
Support Platform
Required
Cutout – observe
all dimensions and
requirements
Cutout – observe
all dimensions and
requirements
Side-bySide Installations
Install two ovens in separate cutouts.
Gas or Electric Cooktops May Be Installed Over This Oven.
See Cooktop Installation Instructions for Cutout Size.
See Label on Top of Oven for Approved Models.
240V/208V
Junction Box
Location
(junction box may
be in adjacent
cabinet)
Gas or Electric Connections for Gas
Cooktop Must be Located in an Adjacent
Accessible Location to the Right
Top and/or Side Fillers
May Be Necessary if
Unit is Positioned
Between Existing
Cabinets. Be Sure
They Are Attached
Securely, Since They
Will Anchor the Oven
in the Cabinet.
30.5" (77.5 cm) 30" models
27" (68.58 cm) 27" models
2 1/2" min. (6.4 cm)
31 1/4" min.
(79.4 cm)
Cooktop
Wall Oven
SIDE OVEN
IMPORTANT:
Maintain a minimum
distance of 31 1/4"
from the top surface
of the countertop to
the wall oven
platform to ensure
that the cooktop and
wall oven do not
interfere with each
other (see picture).
NOTE: One cooktop may be centered over either
oven in the side-by-side installation.
2" (5.1 cm) min.
Cooktop
22" (55.9 cm) min.
Above Support
Platform
36" (91.4 cm)
Countertop
Height
Must Match
Toekick Height
24" (61 cm)
4" (10.2 cm)
Toekick
25" (63.5 cm)
MUST SUPPORT 220 lbs. (99 kg) FOR SINGLE OVENS
Center Line Center Line
3/4" (1.9 cm)
Support Platform
Required
Cutout – observe
all dimensions and
requirements
Cutout – observe
all dimensions and
requirements
Side-bySide Installations
Install two ovens in separate cutouts.
SIDE-BY-SIDE INSTALLATION
(TWO OVENS IN SEPARATE CUTOUTS)
UNDERCOUNTER INSTALLATION
PTS700RSN
GE Profile 30" Smart Built-In Convection Single Wall Oven
with Right-Hand Side-Swing Doors
Specification Revised 1/22
FEATURES AND BENEFITS
Swing Door – An innovative door design that opens to the side instead of down, eliminating
awkward reaching.
Precision Cooking Modes* – Simplify the cooking process with precision cooking modes that automatically
track progress, and make time and temperature adjustments.
No Preheat Air Fry – Integrated hot air frying technology gives you crispy results in your oven
without using oil.
No Preheat – Eliminate the need for preheating and save time with a variety of precision
cooking modes.
Built-In WiFi, Powered by SmartHQ App – Connect, control and manage your oven from anywhere with your
smartphone or tablet.
GE Profile Connect + – Ensure your oven always has the latest features, like new Air Fry modes, with
downloadable software updates.
Full-Color Display – Easily navigate wall oven settings thanks to a 7" touchscreen display.
True European Convection with Direct Air – This oven features True European Convection,
an advanced convection system that uses a third heating element and reversing fan for the
highest level of heat and air circulation.
Easy-Glide, Never-Scrub Rack – This smooth-gliding oven rack can be left in the oven during
the self-clean cycle so you never have to scrub.
Temperature Probe – A precision temperature probe connects to the oven to ensure your
food is properly cooked.
Self-Clean with Steam Clean – This self-cleaning oven uses optional steam cleaning
for light soils to clean the oven cavity with less heat and odor.
Fit Guarantee – This oven will fit your existing cut-out, or GE Appliances will help
pay for modifications up to $300.
Model PTS700RSNSS – Stainless Steel
*Available once connected to WiFi.
PTS700RSNSS
Visit geappliances.com for more info
  • Page 1 1
  • Page 2 2
  • Page 3 3

GE Profile PTS700RSNSS User guide

Type
User guide
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI