Monster 0047 User manual

Type
User manual
MFD/TABLET MOUNT
CENTER
Instruction Manual
Bedienungsanleitung
Mode d‘emploi
2MONSTERTECH MFD/TABLET MOUNT CENTER INSTRUCTION MANUAL
GENERAL ASSEMBLY INFO AND HOW TO
PROFILE NUT
HEX KEY SET WITH BALL HEAD + EXTENSION OR SIMILAR REQUIRED
3MONSTERTECH MFD/TABLET MOUNT CENTER INSTRUCTION MANUAL
UNIVERSAL CONNECTOR
M8x30
Nut M8
Ø8mm
35
8
25
8
M8x35 M8x25
BOLT DIMENSIONS AND HOW TO MEASURE THEM [mm]
4MONSTERTECH MFD/TABLET MOUNT CENTER INSTRUCTION MANUAL
ASSEMBLY
2x
Washer Ø10
2x
M5x12
2x
M5 nut
5MONSTERTECH MFD/TABLET MOUNT CENTER INSTRUCTION MANUAL
2x
M6x22
2x
Washer Ø12
2x
M6 thin nut
6MONSTERTECH MFD/TABLET MOUNT CENTER INSTRUCTION MANUAL
2x
M6 nut
threaded hole
oriented to the top
as shown here
7MONSTERTECH MFD/TABLET MOUNT CENTER INSTRUCTION MANUAL
2x
M6x22
8MONSTERTECH MFD/TABLET MOUNT CENTER INSTRUCTION MANUAL
9MONSTERTECH MFD/TABLET MOUNT CENTER INSTRUCTION MANUAL
MOUNTABLE DEVICES (Color coded)
VESA 75
Logitech G Flight
Instrument Panel
STREAM DECK Mini
STREAM DECK Live
STREAM DECK XL
(with adapter)
VESA 100
Thrustmaster Cougar
MFD
Tablet or phones
Keyboard Clamp
10MONSTERTECH MFD/TABLET MOUNT CENTER INSTRUCTION MANUAL
THRUSTMASTER COUGAR MFD
Before this step remove the original bracket (without picture).
original screws
11MONSTERTECH MFD/TABLET MOUNT CENTER INSTRUCTION MANUAL
THRUSTMASTER MFD/TABLET COMBO
remove
rubber screws
4x
M3x35
4x
12mm
spacer
4x
washer
4x
nut M3
12MONSTERTECH MFD/TABLET MOUNT CENTER INSTRUCTION MANUAL
13MONSTERTECH MFD/TABLET MOUNT CENTER INSTRUCTION MANUAL
LOGITECH G FLIGHT INSTRUMENT PANEL
4x
M3x35
4x
washer
4x
M3 nut
14MONSTERTECH MFD/TABLET MOUNT CENTER INSTRUCTION MANUAL
ELGATO STREAM DECK MINI
4x
M4x12
4x
M4 nut
15MONSTERTECH MFD/TABLET MOUNT CENTER INSTRUCTION MANUAL
ELGATO STREAM DECK MK.2 / LIVE
4x
M4x12
4x
M4 nut
Insert the wedge
for using with
STREAM DECK LIVE.
Not needed for
STREAM DECK MK.2!
16MONSTERTECH MFD/TABLET MOUNT CENTER INSTRUCTION MANUAL
ELGATO STREAM DECK XL
4x
M4x12
4x
M4 nut
17MONSTERTECH MFD/TABLET MOUNT CENTER INSTRUCTION MANUAL
ALTERNATIVE MOUNTING
18MONSTERTECH MFD/TABLET MOUNT CENTER INSTRUCTION MANUAL
Buddy-Fox UFC for A-10C
4x
M4x12
4x
M4 nut
4x
washer
alternative mounting position
Slide in your Buddy-Fox
Slide in your Buddy-Fox
25-08-2021
ALTERNATIVE MOUNTING
CAUTION! Check before usage if all screws are tightened.
CAUTION! Check before usage that the mounting plate is screwed on tight after making height adjustments.
DANGER: Contains small parts not suitable for children under 3 years.
Only suitable for children over 12 years and adults.
All MONSTERTECH products are hand assembled and quality checked.
The mount is designed for usage only with a computer controller (f.e. joystick or throttle).
We exclude liability if the product is used for purposes other than intended.
MONSTERTECH shall be liable for damage arising from causes other than the detriment to life, body and health
only to the extent that such damage arises from wilful misconduct, gross negligence or the culpable violation
of a fundamental contractual obligation on the part of MONSTERTECH or a vicarious agent (e.g. the delivery
service) of MONSTERTECH. Any further liability for damages shall be excluded.
If you have safety concerns or questions regarding assembly, contact us under [email protected] or visit
www.monstertech.de/en/.
WARNING NOTICES
VORSICHT! Achten Sie darauf, dass vor Benutzung alle Schrauben immer fest angezogen sind.
VORSICHT! Achten Sie darauf, dass die Befestigungsplatte nach der Höheneinstellung fest angezogen ist.
GEFAHR: Nicht für Kinder unter 3 Jahren, Kleinteile - Verschluckungsgefahr!
Nur für Kinder ab 12 Jahren und Erwachsene
Alle Produkte der Firma MONSTERTECH sind handgefertigt und qualitätsgeprüft.
Die Halterung ist nur zur Verwendung in Kombination mit einem PC Controller (z.B. Joystick oder Schubreglers)
ausgelegt.
Wir übernehmen keine Haftung für zweckentfremdete Benutzung.
Für andere als durch Verletzung von Leben, Körper und Gesundheit entstehende Schäden haftet die
MONSTERTECH lediglich, soweit diese auf vorsätzlichem oder grob fahrlässigem Handeln oder auf schuldhafter
Verletzung einer wesentlichen Vertragspicht durch MONSTERTECH oder eines Erfüllungsgehilfen (z. B. dem
Zustelldienst) der MONSTERTECH beruhen. Eine darüber hinausgehende Haftung auf Schadensersatz ist
ausgeschlossen.
Bei Fragen zur Sicherheit oder Aufbau unserer Produkte, wenden Sie sich an [email protected] oder
besuchen unsere Website unter www.monstertech.de.
WARNHINWEISE
ATTENTION! Vériez que toutes les vises sont correctement serrées avant utilisation.
ATTENTION! Après ajustement en hauteur de la plaque de montage, vériez que les vises sont correctement
serrées avant utilisation.
DANGER: Contient des petites pièces susceptibles d‘être avalées. Ne convient pas aux enfants de
moins de 3 ans. Utilisation appropriée pour enfants à partir de 12 ans et adultes.
Tous les produits MONSTERTECH sont fait main et on passés les contrôles de qualité.
La xation est conçue uniquement pour une utilisation avec un joystick ou une manette des gaz.
Nous dégageons toute responsabilité pour toute utilisation autre que celle prévue.
Pour les dommages engendrés autres que l’atteinte corporelle, à la vie et à la santé, MONSTERTECH n’est
responsable que dans la mesure où ces dommages reposent sur un acte intentionnel, une faute lourde ou la
violation fautive d’une obligation contractuelle essentielle par MONSTERTECH ou par des agents délégués par
MONSTERTECH. Une responsabilité allant au-delà en dommages et intérêts est exclue.
Si vous avez des questions concernant la sécurité ou l‘assemblage, contactez-nous a [email protected] ou
visitez www.monstertech.de/fr/.
NOTICES D‘AVERTISSEMENT
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20

Monster 0047 User manual

Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages