2017BTU

Terma 2017BTU Installation guide

  • I have reviewed the provided installation guide for the TERMA Alex 1140x500mm radiator. This document includes detailed instructions on how to properly install the radiator, covering aspects like bracket placement, drilling depth, valve connections, and system bleed procedures. I am here to help you with any specific questions you might have about this radiator and its installation based on this document.
  • What type of valves are needed for this radiator?
    What kind of walls are the included plugs designed for?
    How far from the floor should the radiator be installed?
SX
57
÷ 65
470
1140
500
90960
132 ÷ 140 470
G1/2"
G1/2"
Installaon guide Alex 1140x500mm - SX
Please read the instrucons in full before starng to fit your radiator.
Please check that all parts listed are present before starng installa-
on.
Valves are not provided, please make sure that you have them
before you start. This product requires standard 1/2" radiator valves.
Before drilling holes for the brackets please check that there are no
hidden wires or pipes.
The plugs supplied are for hard walls masonry only. Please make
sure you are using the correct plug for your wall.
Terma radiators are designed for closed heang systems.
The radiator should be fied at least 100 mm from the floor to
maximise heat efficiency.
Nong the distances between bracket centres, mark out the
posion of the brackets on the wall.
Drill holes to approximately 80 mm depth using a 10 mm drill bit
and insert rawl plugs (1). Using connecng screw with a washer (2)
aach mounng bracket-1 (3).
Using bracket to collector fixing screw (5) aach mounng
bracket-2 (6) to radiator.
Guide all mounng brackets-2 (6) into mounng brackets-1 (3) and
fix with connecng screws (4)
Connect the water flow using appropriate 1/2" BSP valves. Follow
valves manufacture guidelines for correct installaion.
Fill the radiator and purge any trapped air via the bleed valve at the
top of the radiator.
Wipe your radiator down using a clean damp cloth.
Never use scourers or abrasives.
For all installaon and warranty enquiries please
contact Crimson Bear Customer Support on
01535 636256
Refers to water and dual fuel version
22
30
30
Fixing kit content
rawl plug
wall fixing
screw +
washer
mounng
bracket-1
bracket
connecng
screw
bracket to
collector
fixing screw
mounng
bracket-2
air vent
allen key
(1)
(2)
(3)
(4)
(5)
(6)
Mounng bracket TERMA MK, P/S, 42÷50 mm, 4x
10x80
7
gigieltom20170810 *Refers to water and dual fuel version only
E
F
D
B
A
4x
21 3 4
6
5
4x
8*
4x
42 ÷ 50
4x
1x
14
22
4
a* b* c* d*
#8 4
4x
9*
4x
PZ3
1/2