2. Good-Lite
  3. 585600 Vectograph Viewer
585600 Vectograph Viewer

Good-Lite 585600 Vectograph Viewer, GOOD-LITE 585600 Vectograph Viewer User guide

  • Hello! I've reviewed the user guide for the GOOD-LITE Vectograph Viewers, specifically models 585600, 587800, 585700, and 587900. This document details the setup process, including how to insert the card, position the vectographs, and ensure the correct viewing distance. I'm ready to answer your questions about these viewers.
  • What is the first step for setting up the Vectograph viewer?
    What should I do if I am using the #587800 VAC Double?
    What distance should I ensure between the patient and the Vectograph viewer?
www.good-lite.com | 1.800.362.3860 | 1.888.362.2576 fax 1
Vectograph Viewers Guide
Part Number: 585600, 587800, 585700, 587900
The Vectograph viewer involves a few easy steps to complete setup.
1. Insert long white card and position to the center as shown in figure one.
2. If you are using the #587800 VAC Double, remove the two vectographs from the clear plastic holder and slide into the groves both top
and bottom with the rear vectograph in the rear grove and the vectograph slide with the solid blue bar in the front grove. All other viewers
will require a clear plastic holder.
3. Position the patient and adjust the chair height to ensure the proper angle and 16 inch (30 cm) test distance as shown in figure 3.
27.5 in
16 in
<
Figure 1
Figure 2
/