SereneLife SLSFCR21 Owner's manual

SLSFCR21

Car Safe Hand Gun Safe with 3 Code

INSTRUCTIONS

How to set your combination

1. Turn the dials to the preset combination 0-0-0

and open the safe.

2. Carefully remove the inner tray from the base.

3. Move the reset button to position A as shown

in Picture 1. The reset button is located inside

the safe behind the dials.

4. Turn the dials to set your desired combination.

Use a combination that only you will know and

which will be easy to remember.

5. Move the reset button back to position B as shown in Picture 2.

The lock will now open to your combination.

6. Test the operation of the lock using the new combination before closing

the safe by moving the dials and check that a bar is visible across the lock

opening. Returning to your chosen combination will remove the bar.

1 2

www.SereneLifeHome.com

Using the security strap

1. The security strap has a loop at each end.

2. Pass the strap around an immovable object and then pass one loop

through the other.

3. Place the "free•loop inside the safe, placing the wire in the slot provided

as shown in Picture 3.

4. Close the safe.

www.SereneLifeHome.com