2. Computers & electronics
  3. Audio & home theatre
  4. Soundbar speakers
  5. Bose
  6. SoundTrue® Ultra in-ear headphones – Samsung and Android™ devices
SoundTrue® Ultra in-ear headphones – Samsung and Android™ devices

Bose SoundTrue® Ultra in-ear headphones – Samsung and Android™ devices, AM300, QuietComfort® 25 Acoustic Noise Cancelling® headphones — Samsung and Android™ devices, SoundSport® in-ear headphones — Apple devices Quick start guide

  • Hello! I am an AI chatbot trained to assist you with the Bose SoundTrue® Ultra in-ear headphones – Samsung and Android™ devices Quick start guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Place the bass module
Keep at least 1 – 3 ft. (0.3 – 0.9 m) away from
other wireless equipment.
Note: Adding a second bass module?
Refer to the owner’s guide.
Visit: global.Bose.com/Support/AM300
Connect to power Pair with a SoundTouch® 300 soundbar
1. On the SoundTouch® 300 remote, press .
2. Press and hold
until on the soundbar blinks white.
Once paired, the system emits a tone and
glows white.
Note: Pairing may take several minutes.
1
2
Please read and keep all safety and use instructions.
ACOUSTIMASS
®
300
START HERE
Set up ADAPTiQ® audio calibration
1. Plug the headset into the soundbar.
2. Put on the ADAPTiQ® headset (provided with the soundbar).
Note: If you’re also pairing the optional surround speakers, complete
pairing before running ADAPTiQ audio calibration.
Run ADAPTiQ® audio calibration
1. On the remote control, press .
2. Press and hold
until and on the soundbar glow green.
Note: To cycle through languages, press
and
on the navigation pad.
1
2
©2017 Bose Corporation, The Mountain,
Framingham, MA 01701-9168 USA
AM800136 Rev. 00
global.Bose.com/Support/AM300
/