Getting started is simple!
1. Start up your computer.
2. Remove the cap from the USB stick.
Note: Do not pull the cap too hard as it is attached to the stick.
3. Pull out the plastic tray above the USB connector.
4. Put the SIM card into the tray, and then push the tray back into the stick until it clicks into
place.
5. Insert your Stick into a free USB port on your computer. The Mobile Broadband Manager
software starts installing automatically. Simply follow the Setup Wizard prompts.
Note: Do not disconnect the Stick during the installation process.
6. If prompted, restart your computer.
Life's for Sharing
Mobile Broadband
USB Stick 620
Quick Start Guide
QSG_Mob_Broadb_Stick_IV_INT-090812.indd 1 2009-8-12 11:08:41
We look forward to being of assistance!
For technical help including FAQ's, troubleshooting and downloads go to
www.t-mobile.co.uk/broadbandhelp. If you can’t find what you’re looking for
on the website, then call us on 0845 412 2993 (charged at local rate).
If you have a more general enquiry then please call 0845 412 5000 (charged at local rate).
T-Mobile Customer Service is open from 7 am to10 pm Mon-Fri and 8 am to 8 pm Sat and Sun.
Connecting to the Internet with the
Mobile Broadband Manager software.
On a Windows operating system
After successful installation the Mobile Broadband Manager short-cut icon will appear on
your desktop. Double-click this icon to start the software.
To connect to the Internet click the Connect button. Open the web browser and start using
the Internet!
To disconnect from the Internet, simply click on the button again which is
now named Disconnect:
On a Mac OS X operating system
After successful installation, the Mobile Broadband Manager should start automatically.
The icon is present in the Dock.
To connect to the Internet click the Connect button. Open the web browser and start using
the Internet!
To disconnect from the Internet, simply click on the button again which is
now named Disconnect:
For more information about using your Mobile Broadband USB Stick please refer to the
user manual (which you can access on the CD provided or via the ‘help’ section of the
Mobile Broadband Manager)
LED Status Guide
Colour Light Status Meaning
Red Always on Modem not ready or Error Status
Green Always on Registered to 2G network
Active connection via 2G network or
roaming 2G network
Blue Always on Registered to 3G network
Active connection via 3G network
or roaming 3G network
Green Blinking
Blue Blinking
QSG_Mob_Broadb_Stick_IV_INT-090812.indd 2 2009-8-12 11:08:42
-
1
-
2
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
ZTE Mobile Broadband USB Stick User manual
-
ZTE K5008-Z User manual
-
Finlux 55S8040 Owner's manual
-
-
-
HP ProBook 6540b Notebook PC User guide
-
HP ProBook A7V-M User manual
-
HP ProBook 6550b Notebook PC User guide
-
Sprint Nextel AirCard 597E User manual
-