P90-RAIL Rack Soluon
4-Post Rail Kit
User & Installaon Manual
www.xpcc.com | © 2015 Xtreme Power Conversion Corporaon. All rights reserved. (Rev 2/17/15)
Xtreme Power Conversion Corporaon
P90-RAIL User’s Manual
Page 2
Rack Soluon
P90-RAIL Installaon
Package contents
• Right and le rail sliders, 1 each
• (2) M6 nuts
• (12) M6 screws
Xtreme Power Conversion Corporaon
P90-RAIL User’s Manual
Page 3
Rack Soluon
Step 1
Use 4 screws to mount right and le rail sliders in front of rack.
Step 2
Use 4 screws to mount right and le rail sliders in back of rack.
Step 3
Place the nuts in the proper locaon in the rack based upon height of UPS.
Xtreme Power Conversion Corporaon
P90-RAIL User’s Manual
Page 4
Rack Soluon
Step 4
Carefully place the UPS on the rail support.
Step 5
Fix the UPS in posion with screws.
Step 6
Rail kit installaon is now complete.
-
1
-
2
-
3
-
4
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Xtreme P90L-1500 User manual
-
Xtreme P90g User manual
-
-
-
-
-
-
Xtreme P91 User manual
-
-
