Klipsch CA 8-T User manual

Category
Microphones
Type
User manual

This manual is also suitable for

ALL-PURPOSE 8"
TWO-WAY COMPACT
LOUDSPEAKER
SYSTEM
The Klipsch CA-8T compact full range
system is perfect for higher power pro-
fessional applications where flexible
mounting and extended range are
re q u i r ed, including everything needed
for fast and easy distributed sound
installations. Equally at home indoors
or out, in fore g r ound or backgro u n d ,
higher S P Lapplications, the CA-8T’s
appearance and Klipsch fidelity fit into
residential, business or re c re a t i o n a l
e n v i r onments equally well.
The UV- and weather- r esistant A B S
e n c l o s u r e includes an internal multi-
tap transformer with switchable dire c t
8 ohm bypass, simplifying hookup to
any type of sound system. The C-
bracket assembly attaches to the enclo-
s u r e’s integral stainless steel thre a d e d
studs with oversized knobs, ensuring
a positive position-lock and rapid "no-
pain" installation. External attachment
to the built-in security retainer pro-
vides an extra measure of safety,
p r otecting against unexpected
damage or re m o v a l .
The CA-8T includes a high power 8"
extended range low-frequency driver
and a 1" titanium diaphragm compre s-
sion driver on a molded Tractrix Horn.
The 90º x 60º horn and driver assem-
bly allows repositioning by 90º for
selectable pattern contro l .
The compact dual port bass re f l e x
loudspeaker system can handle 100
watts continuous power for an A E S
sensitivity of 96dB and a maximum
output of 113dB S P L .
Paintable and available in black or
white finishes, the ABS enclosure
f e a t u r es corrosion- and ru s t - re s i s t a n t
stainless steel hard w a r e and a re m o v -
able aluminum powder-coated grille,
ensuring maintenance-free service in
any environment or application.
Whether indoors or out, the Klipsch
CA-8T is the good looking, gre a t
sounding full-range solution for
installed high-fidelity sound.
C A - 8 T
Compact UV and weather- r esistant ABS enclosure
Adjustable pattern 90º x 60º Tr a c t r i x
®
H o r n
Internal 60W multi-tap transformer with direct 8 ohm bypass
Continuous high power handling of 100 watts
White or black enclosure paintable to match decor
96dB sensitivity, 113dB maximum output (1 meter)
11.125" x 16.375" x 11.75" and 17 lbs.
F R E Q U E N C YRESPONSE
1
POWER HANDLING
2
MAXIMUM CONTINUOUS OUTPUT
3
S E N S I T I V I T Y(2.83 V/1M)
4
TRANSFORMER TA P S
H O R I Z O N TA LC O V E R A G E
V E RT I C A LC O V E R A G E
D I R E C T I V I T Y
N O M I N A LI M P E D A N C E
CROSSOVER FREQUENCY
C O M P O N E N T S
INPUT CONNECTO R S
ENCLOSURE MAT E R I A L
HEIGHT
W I D T H
D E P T H
W E I G H T
SHIPPING WEIGHT
F I N I S H E S
A C C E S S O R I E S
64Hz -19kHz±4dB
100 W (21V)
11 3 d B
9 6 d B
7 0 V: 60W, 30W, 15W
1 0 0 V: 60W, 30W
T h ru Position: 8 ohms
60º±40 2500Hz-20kHz
80º±40 1300Hz-20kHz
8±2dB 1300Hz-20kHz
8 ohms nominal (4.2 min @ 175 Hz)
2 k H z
One K-1111 - A8" low frequency driver
One K-11 8 - A1" titanium diaphragm compression driver
5-way binding posts
All-weather ABS plastic
11.125" (28.26cm)
16.375" (41.59cm)
11.75" (29.85cm)
17 lbs. (7.72kg)
44 lbs. (19.98kg)
White or Black
C-Bracket (included), CASecurity Kit
1
3M, Half-space anechoic
2
AES Standard, continuous pink noise 50Hz-10kHz, 6dB peaks
3
Calculated at 1M at power handling power input
4
SPLat 1M, half-space anechoic with 2.83V input
S p e c i f i c a t i o n s
CA-8T
COMPACT 8
"
TWO-WAY SPEAKER SYSTEM
Horizontal Off-Axis Transfer Function
Horizontal Coverage (-6dB) Vertical Coverage (-6dB)
Impedance
Directivity Index
Frequency Response
Vertical Off-Axis Transfer Function UP Vertical Off-Axis Function DOWN
Horizontal
1
/3 Octave Polars
Vertical
1
/3 Octave Polars
3502 Woodview Trace, Suite 200 • Indianapolis, IN 46268
137 County Road 278 • Hope, AR USA71801
1-888-600-5776 • www.klipsch.com
Architectural Specifications
The CA-8T all-purpose two-way compact loudspeaker
system shall include a 8" (20.32cm) K-1111-A weather-
resistant low frequency driver and a 1" (2.54cm) K-118-
A titanium diaphragm high frequency compression
driver mounted on a molded Tractrix Horn. Signal shall
be provided to the transducers via a passive internal
frequency dividing network, with a 2kHz crossover
frequency. The enclosure tuning shall be dual port
bass reflex.
Frequency response shall be 64Hz to 19kHz, ±4dB, with
the -10dB down point at 45Hz, measured at 1 meter,
half space anechoic. The dispersion angle shall be 90º x
60º nominal (refer to graph). Sensitivity shall be 96dB
SPL, measured at 1 meter, half space anechoic, with a
2.83V input. Power handling shall be 100 watts (21V),
to AES standards, continuous pink noise, 50Hz to
10kHz, 6dB peaks. Calculated maximum continuous
output at 1 meter shall be 113dB SPL. Nominal
impedance shall be 8 ohms, with a 4.2 ohm minimum
at 175Hz. Full-range connections shall be made via
5-way binding posts.
A removable powder-coated aluminum grille shall be
provided for protection of the transducers from
tampering or damage. The enclosure shall be of UV-
and weather-resistant ABS plastic, available in black
or white, with dimensions of 11.125" (28.26cm) high
by 16.375" (41.59cm) wide by 11.75" (29.85cm) deep.
Net weight shall be 17 lbs. (7.72kg). Mounting shall
be via protruding stainless steel threaded studs on
the side enclosure panels, mating to large external
knobs for positive attachment to the C-shaped
mounting bracket (included).
The system shall be a Klipsch CA-8T loudspeaker.
1M0901
195064
©2001 Klipsch Audio Technologies. All rights reserved.
Specifications subject to engineering changes.
Back View
Back View With Out Bracket
1/4-20 UNC Stud
1/4-20 UNC Stud
Thread Hole
Left Side View
Front View
1/4-20 UNC Stud
1/4-20 UNC Stud
1/4-20 UNC Stud
Top View
Right Side View
Safety Point
6.559
3.486
11.125 Ref
Bottom View
6.559
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Klipsch CA 8-T User manual

Category
Microphones
Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI