Xtreme XBE9-0104-BLK User manual

Xtreme
Brand
Xtreme
Model
XBE9-0104-BLK
Type
User manual

This manual is also suitable for

GETTING STARTED
L
8
9
R
7
6
3
4
5
1 Micro USB charging port.
2 Battery level LED indicator.
3 Lid release button.
4 Battery level check button
5 Charging Cradle
6 Right earbud LED indicator
7 Right touch press control button
8 Left earbud LED indicator.
9 Left touch press control button
10
Ear wing (S,M,L)
10 10
L
Left Earbud
Right Earbud
R
Pause/Play/Hangup/Answer call, Previous
Track, Volume Down
Pause/Play/Hangup/Answer call,
Next Track (Hold for 2 seconds), Volume Up
— Charge on the go charging case, with the included micro
USB cable for 2-3 hours.
— When all LED’s are illuminated battery case is fully charged.
— To check the battery level, press the power indicator(4) button
located inside the case.
Battery Level LED Indicator
25%
50%
75%
100%
CHARGING YOUR CASE
1
2
RED- Charging Flashing BLUE- Link Mode Solid BLUE- Paired Flashing RED - Battery Low
CHARGING YOUR EARBUDS
— Place Right and Left Earbuds in battery case charging cradle
(5)
to properly charge.
— Earbuds LED indicator will illuminate Red to indicate that they
are charging properly. When LED turns off
(6)
earbuds battery
is fully charged.
POWERING ON
Touch Control
— Remove both earbuds from charging
cradle
(5)
and power on by touch
pressing the “X” logo for 3 seconds
(7)
.
— Earbuds will flash Blue to indicate
that they are in Link mode. Right &
Left earbuds will automatically link
together and LED on both earbuds will
remain solid.
(7)(8)
.
EARBUD PLACEMENT
Insert
Insert the earbud
into your ear.
Rotate
Rotate the earbuds
to fit snug inside
your ear canal.
Tuck
Tuck the tip of the
earwing
(10)
into the
ridge of your ear.
*Note: Please avoid touching the “X” logo while positioning in ear,
to prevent the earbuds from unintentionaly powering down.
PAIRING
*Note: Once earbuds have been initially paired successfully with your mobile
device they will automatically pair the next time they are powered on.
— Enable Bluetooth search mode on
your mobile device and search for
pairing name “LYNX-R” or
“LYNX-L”, and select it on your
mobile phone. Once the earbuds
are successfully connected a
notification will sound.
— Now you can enjoy your true
wireless Bluetooth Earbuds.
OPERATING BLUETOOTH EARBUDS
Function Operation
Power On Hold L or R for 3 seconds
Power Off Hold L or R for 5 seconds
Play/Pause Single tap L or R
Answer/Reject Single tap L or R
Raise Volume Double Tap R
Lower Volume Double Tap L
Change Previous Hold L for 2 seconds
Change Next Track Hold R for 2 seconds
Earbuds LED indications (Blue & Red)
Power On
Red and Blue LED will flash 1 second
Pairing Flashing Blue
Paired Successfully Solid Blue
Low Battery Flashing Red
Power Off Remain Off
Earbuds in Cradle
Charging Solid Red
Fully Charged Remain Off
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

Xtreme XBE9-0104-BLK User manual

Xtreme
Brand
Xtreme
Model
XBE9-0104-BLK
Type
User manual
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents