NIGHT OWL IH804-1612BA Installation guide

Type
Installation guide

This manual is also suitable for

NIGHT OWL IH804-1612BA

The NIGHT OWL IH804-1612BA is a powerful and versatile surveillance solution for your home or business. With 16 channels, you can connect up to 16 cameras to monitor a wide area. The recorder supports both wired and wireless cameras, giving you the flexibility to choose the best option for your needs.

The IH804-1612BA features advanced motion detection and recording capabilities. You can set the recorder to automatically record when motion is detected, and you can also set up specific zones to monitor. The recorder also supports night vision, so you can keep an eye on your property even in the dark.

NIGHT OWL IH804-1612BA

The NIGHT OWL IH804-1612BA is a powerful and versatile surveillance solution for your home or business. With 16 channels, you can connect up to 16 cameras to monitor a wide area. The recorder supports both wired and wireless cameras, giving you the flexibility to choose the best option for your needs.

The IH804-1612BA features advanced motion detection and recording capabilities. You can set the recorder to automatically record when motion is detected, and you can also set up specific zones to monitor. The recorder also supports night vision, so you can keep an eye on your property even in the dark.

Adding a Camera to the NVR
Input the other end of the Ethernet cable into an open
Ethernet port on the back of the NVR.
OPTIONAL STEP: Insert one end of the Ethernet cable into the
cable cover as shown in the image above.
Connect the covered end of the Ethernet cable to the camera’s
power cable.
1
3
2
NOTE: Make sure Ethernet cable is securely connected.
WATERPROOF CABLE COVERETHERNET CABLE
ETHERNET
CABLE
ETHERNET CABLE WITH COVER
COMPLETION
CAMERA CABLE
Wired IP Camera & Accessories
Mounting
Hardware
Camera(s)
Waterproof
Cable Cover(s)
Dome(s)
Before you get started, you will need:
Ethernet Cable(s)
ETHERNET CABLE
Item Not Included
NOTE: Cameras can be powered by Ethernet cables or a
power adapter. Camera power adapter not included.
*Disclaimer: The exact components of your product, images, and quantities may vary depending on your model number.
Connect and test all cameras locally
(near NVR) before mounting.
ONLY FOR DOME CAMERA:
Remove the mounting base using
the hex key.
Camera Installation
Using a drill bit slightly smaller than the included screw anchors, drill into the mounting surface using the guide marks. Insert the screw
anchors. Line up the camera base holes with the screw anchors. Holding the mounting base or mounting bracket in place , insert
screws and tighten until secure.
ONLY FOR DOME CAMERA: If your Ethernet cable
is being run through a wall/ceiling, insert the cable
through the center ring of the mounting base
before mounting. Cable not being run through a
wall/ceiling? Use the cut out .
ONLY FOR DOME CAMERA: Make sure
screws are securely fastened. Attach the
dome camera to the mounting base using
the hex key.
Once mounting is complete,
connect your camera to the
NVR to complete installation.
1
Using the holes in the mounting base or the cameras mounting bracket , mark your
screw positions on the surface where you plan to mount the camera.
2
3
4
65
Before you get started, you will need:
*Disclaimer: The exact components of your product, images, and quantities may vary depending on your model number.
Cameras & Accessories
Hex Key Mounting
Hardware
Mounting
Hardware
Dome(s)
Items Not Included
Power Drill
Phillips
Screwdriver
NOTE: Please ensure you mount the camera at least 7 ft. above the ground and angle it slightly down for optimal recording.
NOTE: If your Ethernet cable is not being run through a wall/ceiling, use the cut out on the mounting base/bracket.
Camera(s)
A
A
A
A
AA
A
A
B
B
B
B
B
1
2
2
1
Dome(s)
Dome(s)
  • Page 1 1
  • Page 2 2

NIGHT OWL IH804-1612BA Installation guide

Type
Installation guide
This manual is also suitable for

NIGHT OWL IH804-1612BA

The NIGHT OWL IH804-1612BA is a powerful and versatile surveillance solution for your home or business. With 16 channels, you can connect up to 16 cameras to monitor a wide area. The recorder supports both wired and wireless cameras, giving you the flexibility to choose the best option for your needs.

The IH804-1612BA features advanced motion detection and recording capabilities. You can set the recorder to automatically record when motion is detected, and you can also set up specific zones to monitor. The recorder also supports night vision, so you can keep an eye on your property even in the dark.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI