Leisure Craft ULRF72-PERF-BLACK Operating instructions

parts

tools needed

6’ PERFORATED ROLLFORM U-LEG BENCH

ASSEMBLY SHEET: ULRF72-PERF

- /” - /”

P.O. Box 1700 • Hendersonville, NC 28793 • Tel: (800) 633-8241 • (828) 693-8241

Fax: (828) 693-8777 • www.leisurecraftinc.com • [email protected]om

Note: nger tighten all bolts and nuts until parts are adjusted for t before tightening with tools.

3/8” Washer

⁄”16 x 1⁄”

Carriage Bolt

⁄” - 16 x 1⁄”

Carriage Bolt

⁄”

Washer

⁄”

Nut

⁄” - 16 x 4”

Slotted Machine Screw

5/16” Nut

3⁄8”-16 x 4”

Slotted Machine Screw

-6 -6 -6 -2

assembly - attach legs to seat

assembly - lower back brace into place & attach

assembly - nish

Maintenance: ⁄” bolts should be tightened to 15 lbs-ft. The bench should be serviced annually to verify all bolts are

tightened to correct specication and that all other parts are in working order.

This manual is also suitable for

Download PDF