Kohler 3363-1-NA Specification

Type
Specification

This manual is also suitable for

Features
Top-mount
Single compartment.
Includes installation hardware.
20" (508 mm) x 20" (508 mm).
Single hole.
Material
18-gauge stainless steel.
Components
Additional included component/s: 1036072 Installation hardware.
Codes/Standards
ASME A112.19.3/CSA B45.4
ADA
ICC/ANSI A117.1
KOHLER
®
One-Year Limited Warranty
See website for detailed warranty information.
USA/Canada: 1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
2-12-2018 04:29
Staccato
Bar Sink
K-3363-1
10" (254 mm)
Notes
Technical Information
Install this product according to the installation
instructions.
All product dimensions are nominal.
SingleBowl configuration:
ADA compliant when installed to the specific
requirements of these regulations.
Top-mountInstallation:
Top-mount, 19-1/2" x 1" (495 mm x
25 mm) with 19-1/2" (495 mm) radius
corners
Cutout:
Length: 16-1/8" (410 mm)
Width: 13-9/16" (345 mm)
Water depth: 8" (203 mm)
Bowl area (Only):
1Number of deck holes:
1-7/16" (37 mm)Faucet hole(s):
3-5/8" (92 mm)Drain hole:
USA/Canada: 1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
2-12-2018 04:29
Staccato
Bar Sink
K-3363-1
  • Page 1 1
  • Page 2 2

Kohler 3363-1-NA Specification

Type
Specification
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI