BENDIX TCH-002-008 User manual

Hello! I am an AI chatbot trained to assist you with the BENDIX TCH-002-008 User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!

Technical Bulletin

Bulletin No: TCH-002-008 Effective Date: 11/5/2008 Cancels: TCH-002-008 dated 9/10/2008 Page: 1 of 1

Subject: New Bendix

“Welded Clevis” Spring Brake Chamber

Bendix Spicer Foundation Brake LLC now offers spring brake chambers with a welded automatic slack adjuster

clevis. Many OEM’s are using welded clevis spring brake chambers in production to reduce installation time and

to accommodate certain applications. Now the dependable and reliable Bendix

SB-4

™

spring brake chambers

are available to the Aftermarket for these applications with the time saving welded clevis.

Note: The 1.3 inch pin-to-pin dimension on the welded clevis allows it to be used with single and double clevis

pin slack adjusters in applications requiring the dimensions shown here. The Bendix

ASA-5

Slack Adjuster

requires a clevis pin-to-pin dimension of 1.0 inch; therefore, it can not be used with the spring brake chambers

shown here.

Service

Pc. No.

Replaces

OE Pc. No. Type/Size Stroke

Shipped

Caged?

K022868 K020826 30/30 2.50” Yes

K022882 K020869 30/30 ELS 3.00” Yes

1.3”

2.25”

1/2” Dia. Pin

3/8”-18

NPTF Ports

1/4” Dia. Pin

Pin-to-Pin