Stairmaster SMV-1 LCD Digital Television Owner's manual

Stairmaster
Brand
Stairmaster
Model
SMV-1 LCD Digital Television
Type
Owner's manual

Stairmaster SMV-1 LCD Digital Television:

This model is a 15.6” Personal Digital TV System with a variety of features to help you get the most out of your TV viewing experience, especially in a health club environment. Here are some of the capabilities of your new Stairmaster SMV-1:

  • Instant Channel Programming: When you first turn on your TV or if you move it to a new location, this feature will automatically scan for available channels and program them into your TV's memory.
  • Customizable Channel Labels: You can assign custom labels to each channel for easy identification, making it easier to find your favorite channels quickly.

Stairmaster SMV-1 LCD Digital Television:

This model is a 15.6” Personal Digital TV System with a variety of features to help you get the most out of your TV viewing experience, especially in a health club environment. Here are some of the capabilities of your new Stairmaster SMV-1:

  • Instant Channel Programming: When you first turn on your TV or if you move it to a new location, this feature will automatically scan for available channels and program them into your TV's memory.
  • Customizable Channel Labels: You can assign custom labels to each channel for easy identification, making it easier to find your favorite channels quickly.
February, 2012 (Version 6) www.myeclubtv.com Page 1/27
MYE Entertainment
MYE PERSONAL DIGITAL TV SYSTEM
M156TV-NAQ2
Owners Manual
Installation Notice
Instant Channel Programming Feature
TV is Preset to Cable Standard - QAM
Complete the Signal / Power Connections and
press 0001 to Begin Channel Programming Scan
February, 2012 (Version 6) www.myeclubtv.com Page 2/27
CONTENTS
page(s)
page
GENERAL SAFETY and CARE 3 - 5
In the Box…………………………………….. 5
Mounting the Screen………………………... 5
FCC Statement………………. 5
MENU: SETUP and OPERATION
6
Main MENU – Access 6
1 CHANNEL MENU 6 - 9
1 - 1 Tuning Band…………………... 7
1 - 2 Cable Mode……………. 8
1 - 3 DTV Signal…………………….. 8 1
-
4 Auto CH Search………. 9
1 - 5 Manual CH…………………….. 9 1 - 6 Channel Label Options.. 10
1 - 7 Menu Language………………. 10
2 Video Menu 11 - 13
2 - 1 Contrast……………………….. 11
2 - 2 Brightness…………….. 11
2 - 3 Sharpness…………………….. 12 2
-
4 Color…………………… 12
2 - 5 Tint…………………………….. 12 2 - 6 Aspect Ratio………….. 13
2 - 7 Settings………………………… 13
3 Audio Menu 14 - 16
3 - 1 Audio Language……………… 14 3
-
2 Base…………………… 15
3 - 3 Treble …………………………. 15 3 - 4 Balance……………….. 15
3 - 5 Digital Audio Output………….. 16 3 - 6 Settings…………………. 16
4 Setup Menu 17 - 19
4 - 1 Set Time……………………….. 17 4 - 2 Sleep Mode Timer……. 17
4 - 3 Advanced Video Mode………. 18 4
-
4 Set Password………… 18
4 - 5 Parental Control ……………... 18 4 - 6 Close Caption Options.. 19
4 - 7 Display Closed Caption………. 19
5 CUSTOM FEATURES 20 - 23
5 - 1 Auto-Off Vibration Detect 20 5 - 2 Home Channel Default 21
5 - 3 Private Network Default 22 5
-
4 Auto Power Off 23
6 Headphone Jack Replacement 23
7 Docking Station Installation 24
8 Specifications 25
9 Warranty…………………….. 26 - 27
February, 2012 (Version 6) www.myeclubtv.com Page 3/27
GENERAL SAFETY and CARE
Thank you for your purchase of the MYE Entertainment MYE PERSONAL DIGITAL TV SYSTEM.
This product has been designed specifically for use in the health & fitness industry, ensuring maximum
performance and longevity in the harsh fitness club environment. Properly cared for, this product will
provide years of high-quality entertainment.
Prepare an area in which to place the product components as they
are removed from the box prior to installation. The surface of the
work area should be clean so as not to damage the screen and
associated components.
WARNING!
Do not open monitor enclosure. There are no user-serviceable parts inside.
Any changes or modifications made to this product that are not approved by
MYE Entertainment will void the user’s warranty and authorization to operate
the equipment.
Do not open package using sharp instruments or tool.
7/16” wrench #2 Phillips NO POWER TOOLS!
Required
Tools
Inspect all shipping carton for signs of damage and to ensure that the
contents of the carton have not broken loose during shipping.
February, 2012 (Version 6) www.myeclubtv.com Page 4/27
Radio Frequency Interference (RFI) Federal Communications Commission, Part 15
This device complies with Part 15 of the FCC
Rules (47CFR15). Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.
This product generates and utilizes radio frequency energy. If not installed and maintained in accordance with the installation &
maintenance procedures as prescribed by MYE Entertainment, there is a possibility of causing interference with other services.
In order to determine whether or not this product is generating harmful interference, try performing the following steps:
• Try turning off the product by unplugging it from the AC power receptacle.
• Try powering the product from another AC power receptacle.
• Relocate or turn the antenna of the receiving device.
• Increase the distance between this product and the receiving device.
If these steps do not resolve the interference, please contact your local installing company or MYE Entertainment at
1-661-964-0217.
Do not expose unit to liquid, rain, excessive moisture
or areas of high humidity.
Do not use bent, damaged or modified power cords.
Discontinue use and contact your technician.
Important Safety Instructions
Do not spray cleaner directly onto monitor. Clean only with a
dry, soft cloth.
Only use the power adapter supplied with this product! Use of non-approved power
adapters may result in personal injury or damage to the product.
This product should be installed using a manufacturer-approved mounting method ONLY.
Use of unapproved mounting brackets may damage the product and void the warranty.
Route all cables safely per mounting situation. Ensure that the cables are routed in a manner
as to avoid being damaged by personnel or equipment.
Ensure the product has adequate ventilation so as not to overheat the product. Do not place
anything on the product that may impede proper air circulation and thus damage the product.
Avoid extreme temperatures. Locate the equipment away from sources of heat, such as
radiators and heat registers.
CAUTION!
RISK OF ELECTRICAL SHOCK
Do not attempt to disassemble, open or otherwise service the
product. There are no user-serviceable parts inside.
Before you begin, read all warnings.
FCC Statement
February, 2012 (Version 6) www.myeclubtv.com Page 5/27
1 DC Power Input. 2.5mm DC jack. 5 Audio/Video Input. RCA jacks
2 AUX TV Controller Cable port. RJ45 jack. 6 AUX Audio Output. 3.5mm stereo jack
3 AUX RGB Input. HD-15 jack 7 RF Signal Input. TYPE "F Connector
4 AUX Audio Input. 3.5mm stereo jack
In The Box
The shipping carton for the screen should contain the following components:
DC Power In
1 2
3 4 5 6 7
RF “F” A/V IN (RCA STYLE)
A
udio In
3.5mm
RGB
RJ45
CONNECTION IDENTIFICATION
Mounting the Screen and Making the Connections
Audio Out
3.5mm
15.6” LCD TV
POWER SUPPLY and
AC POWER CABLE
MANUAL
Use the four screws (included) to fasten the screen to
the mount. Using screws other than those supplied,
may result in damage to the screen. It is highly
recommended to not
use a power tool when
tightening these screws, as this may result in
damage to the screen. Use a #2 Phillips screwdriver,
taking care not to over-tighten!
SCREEN MOUNTING SCREWS
Fasten the F-connector of the coaxial cable on to the
fitting on the rear of the screen. It is important that
care be taken with this connector, as
over-tightening will result in serious damage to
the screen. This connector should be started using
only fingers and then tightened to 20 inch-pounds of
torque, slightly more than finger-tight.
Carefully unscrew Strain Relief cable clamp from
enclosure rear. Do not use power tools. Run the DC
cable through the cable clamp and reattach.This will
help prevent the power cable from becoming
accidentally unplugged during use. Insert the DC
power plug to the TV power jack.
February, 2012 (Version 6) www.myeclubtv.com Page 6/27
1 2 3
4*
5 6
10 7
8
9
KEY PAD ORIENTATION
1 Power (On / Off)
2 Channel (Up / Down)
3 Volume (Up / Down)
4* Intellijack Faulty Headphone Jack Indicator* ( Blue = Faulty Headphone Jack Detected)(See below)
5 TV Status (Green = TV On) (Red = TV Stand by)
6 Direct Channel Access (1-0)
7 Dash Key / Direct Digital Channel Access (Ex: 88 - 2)
8 Closed Caption. (Closed Caption / Mute)
9 View TV
10 View Docking Station
QUICK KEY CODES
0001 INSTANT CHANNEL PROGRAMMING FEATURE (DEFAULT: CABLE AUTO / QAM)
0002 MENU (Channel - Video - Audio - Set up)
0003 CUSTOM FEATURES (See Page 20)
MAIN MENU ACCESS (No IR remote is required to access the TV MENU)
To access the MENU for SET UP and TV ADJUSTMENTS press “0002”
To navigate through the MENU use Channel Up / Down and Volume Up / Down
ENTER/CHANGE EXIT/BAC
K
SCROLL DOWN SCROLL UP
Key Pad Orientation
There are three Key Codes for quick access to TV features.
*The IntelliJack self diagnostic headphone circuit detects when the headphone jack has failed or been damaged.
When a faulty headphone jack is detected, a BLUE “headphone” icon appears on the keypad (see #4 above). It will
remain on until a new jack is installed and the circuit is reset. (See page 23). To reset the faulty headphone jack
circuit, insert a known good pair of headphones for 5 seconds.
Intellijack Icon
February, 2012 (Version 6) www.myeclubtv.com Page 7/27
1-CHANNEL MENU
1-1 Tuning Band
To ENTER MENU
1) Push “0002” on the TV keypad.
2) Use CHANNEL  keys to select Sub-Menu.
SUB-MENU pages are
:
Channel
Video
Audio
Setup
3) Push Volume key to enter a Sub-Menu.
Tuning Band
Cable Mode
DTV Signal
Auto CH Search
Manual CH Setting
Channel Label Options
Menu Language
1) Use CHANNEL  to select Tuning Band.
2) Use Volume to enter / change setting.
3) (AIR – CABLE – HRC – IRC – AUTO CABLE)
MAIN MENU To access all MENU functions you must enter MENU mode. Press “0002.”
Enter MENU (0002) and Sub-menu page “Channel”
Use Volume to enter.
Sub-menu page “Channel”
To EXIT MENU
1
)
Push VOLUME to exit MENU
To EXIT
1
)
Push VOLUME to exit Sub MENU / MENU
February, 2012 (Version 6) www.myeclubtv.com Page 8/27
1-2 Cable Mode
1-3 DTV Signal
Digital cable is supported depending on transmission system. When QAM is set, 64/256 QAM is automatically detected and
set. This works only when Tuning Band is set to cable. Please check with your cable provider whether the transmission
system is 8VSB, 64QAM or 256QAM. Encrypted signals from paid channels cannot be converted into video/audio. When
transmission is 8VSB, set cable mode at VSB. When transmission is 64/256 QAM, set cable mode at QAM.
1) Use CHANNEL  keys to select DTV Signal.
2) Use Volume key to enter.
Signal Window meter will show signal strength.
(weak/normal/strong)
1) Use CHANNEL  to select Cable Mode.
2) Use Volume to enter / change setting.
(VSB – QAM)
Input Signal Level Requirements
Common sources of television signal are cable, satellite or over-the-air antenna systems. Many of these choices will
provide signal in analog, digital or both even both formats. In order to provide high-quality images, the signal level supplied
to each screen should be in the range of +5dBmV to +15 dBmV when read on analog channels. A signal level outside of
this range will provide less than optimum results. In order to ensure the highest degree of satisfaction, MYE Entertainment
recommends using a MYE Entertainment Certified Installer for installation & ongoing maintenance.
To EXIT
1
)
Push VOLUME to exit Sub MENU / MENU
Enter MENU (0002) and CHANNEL  to “Channel”
Use Volume to enter.
To EXIT
1
)
Push VOLUME to exit Sub MENU / MENU
Enter MENU (0002) and CHANNEL  to “Channel”
Use Volume to enter.
February, 2012 (Version 6) www.myeclubtv.com Page 9/27
1-4 Auto CH Search
1-5 Manual CH Setting
1) Use CHANNEL  keys to select Auto CH Search.
2) Use Volume key to enter.
Broadcasting frequency is automatically searched and
saved. The search starts from analog TV (NTSC) to
digital TV (VSB/QAM), and it takes 2~4 min.
Channel numbers are allocated for weak signals from
analog broadcasting. IN DTV, weak signals or signals
without broadcasting data are ignored.
1) Use Channel  keys to select Manual CH.
2) Use Volume key to enter channels listed.
3) Use Channel  keys to select channel
4) Use Volume set options:
Viewable – Not Viewable
For Channel Default* / Auto Default* please refer to
Custom Features
Depending on the content provided by the cable or satellite
company, there may be some content received that is
inappropriate for your intended viewing audience. Once
channel scanning is complete, these channels can be deleted
as necessary by using the IR remote control.
If the content provider does not provide an encoded rating for
the content (Eg: MA14), inappropriate content will not be
blocked by the parental control setting of the screen.
Enter MENU (0002) and CHANNEL  to “Channel”
Use Volume to enter.
Enter MENU (0002) and
CHANNEL  to “Channel”
Use Volume to enter.
To EXIT
1
)
Push VOLUME to exit Sub MENU / MENU
This TV is equipped with an instant channel programming feature. The television tuner is preset
to Cable Standard – QAM. To program the TV in one step, complete the Signal / Power
Connections and press 0001 to begin channel programming Scan.
To access the Auto Scan through the MENU:
Instant Channel Programming Feature Installation Notice!
February, 2012 (Version 6) www.myeclubtv.com Page 10/27
1-6 Channel Label Options
1-7 Menu Language
1) Use Channel  to select Channel Label.
2) Push Volume to enter.
3) Use Channel  to select channel.
4) Use Volume to move to first character entry.
5) Use Channel  to select character.
6) Use Volume to move to next character entry
Analog channels are shown as “------“ because there is
no channel info in analog.
7) To SAVE, wait 10 seconds for entry display to
disappear. Entry will be saved to Channel OSD. (On
Screen Display)
1) Use Channel  to select Menu Language.
2) Push Volume to enter / change setting.
(English – Spanish – French)
Enter MENU (0002) and CHANNEL  to “Channel”
Use Volume to enter.
Enter MENU (0002) and CHANNEL  to “Channel”
Use Volume to enter.
To EXIT
1
)
Push VOLUME to exit Sub MENU / MENU
February, 2012 (Version 6) www.myeclubtv.com Page 11/27
2-Video Menu - USER
2-1 Contrast
2-2 Brightness
Contrast
Brightness
Sharpness
Color
Tint
Color Temperature
Aspect Ratio
Settin
g
s
1) Use CHANNEL  to select Contrast.
2) Push Volume to enter.
3) Use Volume  to adjust level.
Contains 3 video presets (Soft – Standard – Vivid) and 1 user adjustable option (User).
1)
Enter MENU (0002) and use CHANNEL  to move to “Video”
2) Push Volume to enter Video Mode.
3) Push Volume to change setting. (Soft – Standard – Vivid – User)
1) Use CHANNEL  to select Brightness.
2) Push Volume to enter.
3) Use Volume  to adjust level.
2-VIDEO MENU
Enter MENU (0002) and CHANNEL  to “Video”
Use Volume to enter.
Enter MENU (0002) and
CHANNEL  to “Video”
Use Volume to enter.
Wait for the level display to disappear.
To EXIT: push VOLUME .
Wait for the level display to disappear.
To EXIT: push VOLUME .
February, 2012 (Version 6) www.myeclubtv.com Page 12/27
2-3 Sharpness
2-4 Color
2-5 Tint
1) Use CHANNEL  to select Tint.
2) Push Volume to enter.
3) Use Volume  to adjust level.
1) Use CHANNEL  to select Color.
2) Push Volume to enter.
3) Use Volume  to adjust level.
1) Use CHANNEL  to select Sharpness.
2) Push Volume to enter.
3) Use Volume  to adjust level.
Enter MENU (0002) and CHANNEL  to “Video”
Use Volume to enter.
Enter MENU (0002) and
CHANNEL  to “Video”
Use Volume to enter.
Enter MENU (0002) and
CHANNEL  to “Video”
Use Volume to enter.
Wait for the level display to disappear.
To EXIT: push VOLUME .
Wait for the level display to disappear.
To EXIT: push VOLUME .
Wait for the level display to disappear.
To EXIT: push VOLUME .
February, 2012 (Version 6) www.myeclubtv.com Page 13/27
2-6 Aspect Ratio
2-7 Settings
When you exit the menu, all video-related values which
were previously set will reset to factory default.
1) Use CHANNEL  to select Aspect Ratio.
2) Push Volume to enter / change setting.
(16:9 – 4:3)
1) Use CHANNEL  to select Settings.
2) Push Volume enter / change setting.
Enter MENU (0002) and CHANNEL  to “Video”
Use Volume to enter.
To EXIT
1
)
Push VOLUME to exit Sub MENU / MENU
To EXIT
1
)
Push VOLUME to exit Sub MENU / MENU
Enter MENU (0002) and CHANNEL  to “Video”
Use Volume to enter.
February, 2012 (Version 6) www.myeclubtv.com Page 14/27
3 Audio Menu - User
3-1 Audio Language
Audio Language
Bass
Treble
Balance
Digital Audio Output
Settings
Audio Language supports digital broadcasting audio as digital broadcasting include several kinds of
audio. Audio Language is set to Default. In some digital channels, audio language is not English
although English is set as audio language. It can be regarded as an error in terms of broadcasting
information, but there will be no problem in functioning.
Contains 4 audio presets (Standard – Music – Movie -Sports) and 1 user adjustable option (User).
1)
Enter MENU (0002) and use CHANNEL  to move to “Audio”
2) Push Volume to enter Audio Mode.
3) Push Volume to change setting. (Standard – Music – Movie – Sports – User)
3 AUDIO MENU
To EXIT
1
)
Push VOLUME to exit Sub MENU / MENU
February, 2012 (Version 6) www.myeclubtv.com Page 15/27
3-2 Bass
3-3 Treble
3-4 Balance
1) Use CHANNEL  to select Balance.
2) Push Volume to enter.
3) Use Volume  to adjust level.
1) Use CHANNEL  to select Treble.
2) Push Volume to enter.
3) Use Volume  to adjust level.
1) Use CHANNEL  to select Bass.
2) Push Volume to enter.
3) Use Volume  keys to adjust level.
Enter MENU (0002) and CHANNEL  to “Audio”
Use Volume to enter.
Enter MENU (0002) and
CHANNEL  to “Audio”
Use Volume to enter.
Enter MENU (0002) and
CHANNEL  to “Audio”
Use Volume to enter.
Wait for the level display to disappear.
To EXIT: push VOLUME .
Wait for the level display to disappear.
To EXIT: push VOLUME .
Wait for the level display to disappear.
To EXIT: push VOLUME .
February, 2012 (Version 6) www.myeclubtv.com Page 16/27
3-5 Digital Audio Output
3-6 Settings
1) Use CHANNEL  to select Digital Output.
2) Push Volume to enter / change setting.
(AC-3 – PCM)
When you exit the menu, all audio-related values which
were previously set will be reset to the factory settings.
1) Use CHANNEL  to select Settings.
2) Push Volume to enter / change setting.
Enter MENU (0002) and CHANNEL  to “Audio”
Use Volume to enter.
To EXIT
1
)
Push VOLUME to exit Sub MENU / MENU
Enter MENU (0002) and CHANNEL  to “Audio”
Use Volume to enter.
To EXIT
1
)
Push VOLUME to exit Sub MENU / MENU
February, 2012 (Version 6) www.myeclubtv.com Page 17/27
4 SETUP MENU
4-1 Set Time
4-2 Sleep Mode Timer
Set Time
Sleep Mode Timer
Advanced Video Menu
Set Password
Parental Control
Closed Caption Options
Dis
p
la
y
Closed Ca
p
tion
1) Use CHANNEL  to select Set Time.
2) Push Volume to enter Set Time.
3) Use CHANNEL  keys to select setting.
Time Zone
Year
Date
Time
4) Push Volume  key to adjust.
1) Use CHANNEL  to select Sleep Timer.
2) Push Volume to enter / change setting.
(Off - 30 - 60 - 90 min.)
Enter MENU (0002) and CHANNEL  to “Setup”
Use Volume to enter.
Enter MENU (0002) and
CHANNEL  to “Setup”
Use Volume to enter.
To EXIT
1
)
Push VOLUME to exit Sub MENU / MENU
Wait for the On Screen Display to disappear.
To EXIT: push VOLUME .
February, 2012 (Version 6) www.myeclubtv.com Page 18/27
4-3 Advanced Video Menu
4-4 Set Password
4-5 Parental Control
1) Use CHANNEL  to Advanced Video Menu.
2) Push Volume to enter Advanced Video Menu.
3) Use CHANNEL  to select setting.
Noise Reduction
Color Temperature
3D Y/C
Adaptive Contrast
Live Scan
LCD Brightness
Setting (Reset)
4) Push Volume to enter / change setting.
1) Use CHANNEL  to select Set Password.
2) Push Volume to enter old password.
3) Use number keys to enter old password
(Factory Set password is 0-0-0-0.)
4) Confirm password
1) Use CHANNEL  to select Parental Control.
2) Push Volume to enter to password window.
3) Use number keys to enter password.
4) View Parental Control settings.
MPAA
TV RATING
5) Use Volume  and CHANNEL  select ratings.
Enter MENU (0002) and CHANNEL  to “Setup”
Use Volume to enter.
Enter MENU (0002) and
CHANNEL  to “Setup”
Use Volume to enter.
Enter MENU (0002) and CHANNEL  to “Setup”
Use Volume to enter.
To SAVE, wait 10 seconds for the On Screen
Display to disappear.
February, 2012 (Version 6) www.myeclubtv.com Page 19/27
4-6 Closed Caption Options
4-7 Display Closed Caption
1) Use CHANNEL  to Closed Caption Options.
2) Push Volume to enter Closed Caption Options.
3) Factory setting is “Automatic”
4) Press Volume enter / change to “Custom”
5) Use CHANNEL  to select Custom CC function.
Size
Text Color
Text Opacity
Background Color
Background Opacity
Edge Effect
Edge Color
6) Push Volume to enter Advanced Video Menu.
1) Use CHANNEL  to Display Closed Caption.
2) Push Volume to enter / change setting.
(On – Off)
Enter MENU (0002) and CHANNEL  to “Setup”
Use Volume to enter.
Enter MENU (0002) and CHANNEL  to “Setup”
Use Volume to enter.
To EXIT
1
)
Push VOLUME to exit Sub MENU / MENU
To EXIT
1
)
Push VOLUME to exit Sub MENU / MENU
February, 2012 (Version 6) www.myeclubtv.com Page 20/27
5- CUSTOM FEATURES – ACCESS
C usto m Features
5-1 AUTO OFF / VIBRATION DETECT
Used to set a vibration monitoring time. When no vibration is detected on the cardio equipment after the assigned
monitoring time the TV will automatically turn “Off.”
C usto m Features
Detect Vibration
Channel Default Time
Channel Default
Auto Default
Auto Power On
Manual Channel Setting
Set Factory Default (Reset)
1) Use CHANNEL  to DETECT VIBRATION.
2) Press Volume to select the desired vibration
monitoring time in minutes (1-8). When no vibration
is detected on the cardio equipment for the
assigned number of minutes the TV will
automatically turn off.
Enter Custom Features (0003)
To EXIT
1
)
Push VOLUME to exit Sub MENU / MENU
To ENTER CUSTOM FEATURES
1) Push “0003” on the TV keypad.
2) Use CHANNEL  keys to select needed feature.
3) Push Volume key to change.
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27

Stairmaster SMV-1 LCD Digital Television Owner's manual

Stairmaster
Brand
Stairmaster
Model
SMV-1 LCD Digital Television
Type
Owner's manual

Stairmaster SMV-1 LCD Digital Television:

This model is a 15.6” Personal Digital TV System with a variety of features to help you get the most out of your TV viewing experience, especially in a health club environment. Here are some of the capabilities of your new Stairmaster SMV-1:

  • Instant Channel Programming: When you first turn on your TV or if you move it to a new location, this feature will automatically scan for available channels and program them into your TV's memory.
  • Customizable Channel Labels: You can assign custom labels to each channel for easy identification, making it easier to find your favorite channels quickly.
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents