08.2014
For customer support please visit www.ryvyr.com or call 866.395.8112 weekdays 8:00 to 5:00 EST or fax 866.395.8113 any time
INSTALLATION INSTRUCTIONS
KENT
VANITY
V-KENT-30BE / V-KENT-30WW
TM
SUGGESTED TOOLS AND MATERIALS
Phillips Screwdriver Level Drill Tape Measure Safety Glasses
10'
THANK YOU FOR CHOOSING RYVYR
Please take a few minutes to review this manual before you start installation. If you encounter
any installation problems, please don’t hesitate to contact us. Before you begin, please
observe all local building codes. Unpack the new product and inspect for damage. The
appearance of your vanity may differ from the illustrations in this guide. These instructions
still apply. Please ensure the finished wall is straight and plumb and the floor is flat and
perpendicular to the finished wall.
ROUGH-IN DIMENSIONS
supply holes
08.2014
For customer support please visit www.ryvyr.com or call 866.395.8112 weekdays 8:00 to 5:00 EST or fax 866.395.8113 any time
• Position the vanity against the finished wall. If necessary, turn the leg levelers to achieve level.
• Mark the supply and drain locations on the inside of the vanity back wall.
• Move the vanity away from the wall and cut the marked supply and drain locations from inside.
• Position the vanity against the wall, aligning the supply and drain locations with the cut holes.
• Install the countertop, sink, drain and faucet according to the manufacturer’s instructions.
INSTALLATION INSTRUCTIONS
• To maintain the beauty of the finish, avoid placing the furniture in direct sunlight, as sunlight causes fading. Also avoid extreme
changes in temperature by arranging furniture away from radiators, heat and air vents, and air conditioning units. Avoid placing
furniture directly under windows.
• Dust the vanity frequently with a clean, soft, dry, lint-free cloth, as well as polish it on a regular basis. Clean the surface by rubbing
in the direction of the grain. Avoid using silicone cleaners and waxes.
• Clean up excess water and spills immediately. Use blotting rather than a wiping action. Water left over a long period of time will
cause white spots in the finish. Please note that some chemicals may damage the finish.
CARE AND CLEANING
Mark & cut supply hole
locations on wall
Position vanity
against wall
Install sink, faucet,
& countertop
according to
manufacturer’s
instructions
**NOTE: items shown
are Ryvyr recommened
components and are not
included.
-
1
-
2
Ryvyr V-KENT-24WW Installation guide
- Type
- Installation guide
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Ryvyr V-KARA-48DE Installation guide
-
-
-
-
-
-
-
-
-
Ryvyr LT-KENT-ST-18WW Installation guide
Other documents
-
Hembry Creek M-ESSENCE-30SE Installation guide
-
-
-
American Standard 9981003.020 Installation guide
-
-
-
-
-
Home Decorators Collection D10024-12W User guide