AM Conservation Group S-B6025 User guide

2301 Charleston Regional Parkway • Charleston, SC 29492 • www.amconservationgroup.com •

[email protected]om • Phone: 843.971.1414

Use and Care Instructions

Model: S-B6025

Product Description: Adjustable Water Saving Toilet Flapper

Use Instructions:

Step 1: Turn off water supply at toilet and flush toilet to empty toilet tank of water. Carefully

remove toilet tank lid and set aside.

Step 2: Remove old flapper from the flush valve.

Step 3a: Install new flapper by sliding over the overflow tube all the way down to the base of

the overflow tube.

Step 3b: For flush valves with mounting ears, trim off collar along the line marked “cut” and

attach flapper to mounting ears on overflow tube.

Step 4: Make sure flapper is property aligned over flush valve seat and attach chain to hook on

flush lever arm directly above flapper leaving minimal slack in closed position.

Step 5: For water savings, adjust the setting on the red dial. The higher the number, the greater

the savings. Try several settings to determine the best one for your toilet.

Step 6: Turn water supply back on.