Page is loading ...
WARRANTY
This Steren product is warranted under normal usage against defects in workmanship and materials to the original purchaser for one year from
the date of purchase.
CONDITIONS
1. This warranty card with all the required information, invoice or purchase ticket, product box or package, and product, must be presented when
warranty service is required.
2. If the product is in the warranty time, the company will repair it free of charge.
3. The repairing time will not exceed 30 natural days, from the day the claim was received.
4. Steren sell parts, components, consumables and accessories to customer, as well as warranty service, at any of the addresses mentioned later.
THIS WARRANTY IS VOID IN THE NEXT CASES:
If the product has been damaged by an accident, acts of God, mishandling, leaky batteries, failure to follow enclosed instructions, improper repair by
unauthorized personnel, improper safe keeping, among others.
a) The consumer can also claim the warranty service in the purchase establishment.
b) If you lose the warranty card, we can reissue it, if you show the invoice or purchase ticket.
RETAILER INFORMATION
Name of the retailer ____________________________________
Address _____________________________________________
Product ______________________________________________
Brand _______________________________________________
Serial number _________________________________________
Date of delivery _______________________________________
In case your product fails or have questions, please contact your nearest dealer. If you are in Mexico, please call to our Call Center.
01 800 500 9000
Product design and specifi cations are subject to change without notice.
Product: Electric bell
Part number: TRS-600
Brand: Steren
Before to use your new’s Steren product, please read this manual to avoid any bad operation.
IMPORTANT
•The installation should be performed by qualifi ed personnel.
•Avoid dropping the unit as this may cause damage.
• Do not use or store the equipment near wet places. May
cause malfunction or shock hazard.
Please see our website (www.steren.com) to obtain the latest
version of the manual.
HIGHLIGHTS
INSTRUCTIONS
SPECIFICATIONS
Install this electric bell and alert to your neighborhoods in your community
in case of an emergency. Use it at schools or production factories as alert for
lunch.
You can install it with an alarm system or just with a push button switch to
activate it when you need. Batteries are not required, just use the electric current
and you can use it indoor and outdoor (not immersible).
Manufactured with steel. The base has three holes for an easy installation on the
wall and it has a diameter of 100mm.
High sound pressure
Easy installation
2. Take as reference the bell base, mark and drill holes. Then insert wooden
pegs.
3. Identify the cables.
Installation
Input: 127 V~ 60 Hz
Sound pressure: -88 dB
1. Select an optimal place where you want to install it, we recommend over a
wall or solid surface, under a canopy or ceiling equal or higher than 2m for a
correct sound distribution.
2m or more
Be careful while drilling, be sure that gas or water tubes are not in the
selected place.
4. Connect the bell in accordance with the connections diagram.
Line (red)
Neutral (red)
Earth (green)
Before install it, be sure the cables have not energy.
5. Once done the electric installation, place the screws over the holes of the base and
set the bell.
Note: The minimum caliber of the cable should be 18 AWG (8.84mm).
The switch it sold
separately.
Note: You should not leave the
device working for more than 5
minutes.
TRS-600
V0.0 0615v
Instruction manual
SEGURIDAD
Electric bell
Line (red)
Earth (green)
Neutral (red)
-
1
-
2
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
in other languages
Related papers
-
Steren ELI-712 Owner's manual
-
-
-
-
-
-
-
-
-