Crestron BB-1000L
Wall Mount Back Box
Installation Guide
Crestron BB-1000L Wall Mount Back Box
Contents
Wall Mount Back Box: BB-1000L 1
Description.................................................................................................................................1
Setup .......................................................................................................................................... 4
Assembly.....................................................................................................................4
Mounting .....................................................................................................................4
Installation...................................................................................................................6
Other Mounting Option Accessories ...........................................................................7
Resources...................................................................................................................................8
Industry Compliance ...................................................................................................8
Reference Documents..................................................................................................8
Further Inquiries .......................................................................................................... 8
Future Updates ............................................................................................................8
Return and Warranty Policies ....................................................................................................9
Merchandise Returns / Repair Service ........................................................................9
CRESTRON Limited Warranty...................................................................................9
All brand names, product names and trademarks are the property of their respective owners.
©2008 Crestron Electronics, Inc.
Installation Guide - DOC. 6060B Contents • i
Crestron BB-1000L Wall Mount Back Box
Wall Mount Back Box: BB-1000L
Description
The BB-1000L is a UL
®
-listed pre-construction mounting option for the Crestron
®
APAD LCD controller. It is designed to be installed before the drywall is put up. The
table below lists all parts included with the BB-1000L.
NOTE: If mounting into a material other than drywall (for example, wood lectern,
concrete, or rock) use the cutout template, available in the post-construction kit
WMKM-1000L or WMKT-1000L.
NOTE: For concrete and rock mounting material, allow for proper ventilation before
mounting the controller.
Supplied Hardware for the BB-1000L
DESCRIPTION PART NUMBER QUANTITY
Assembly, Wall Mount, Back Box 4505162 1
Metal, Plate, Blank 2004826 1
Screw, #04-40 x 2”, Pan, Phil 2018793 4
Screw, #08-8B x 1/4”, Pan, Phil 2007277 1
The mounted view of the BB-1000L is shown in the following illustration.
BB-1000L Mounted View (Optional Cover Plate Attached)
Installation Guide - DOC. 6060B Wall Mount Back Box: BB-1000L • 1
Wall Mount Back Box Crestron BB-1000L
The dimensions of the BB-1000L are shown below and on the next page.
Dimensional Drawing (Fully Assembled without Cover Plate)
3.25 in
(8.26 cm)
7.16 in
(18.19 cm)
0.06 in
(0.16 cm)
1.44 in
(3.66 cm)
3.74 in
(9.49 cm)
6.20 in
(15.75 cm)
3.95 in
(10.02 cm)
6.35 in
(16.13 cm)
4 7/16 in
(112 mm)
3 1/2 in
(89 mm)
2 1/2 in
(63 mm)
1/2 in
(13 mm)
1/8 in
(3 mm)
3 11/16 in
(94 mm)
4 3/8 in
(112 mm)
4 9/16 in
(116 mm)
NOTE: Knockout holes are intended for Class 2 wiring only and are ½” and ¾”
diameter.
2 • Wall Mount Back Box: BB-1000L Installation Guide - DOC. 6060B
Crestron BB-1000L Wall Mount Back Box
Dimensional Drawing - Cover Plate
4.74 in
(12.03 cm)
4.65 in
(11.82 cm)
0.03 in
(0.08 cm)
Installation Guide - DOC. 6060B Wall Mount Back Box: BB-1000L • 3
Wall Mount Back Box Crestron BB-1000L
Setup
Assembly
Required Tools:
• #2 Phillips tip screwdriver
The back box mounting enclosure assembly comes fully assembled except for a
grounding screw. Complete the following procedure in the order provided.
1. Remove knockouts as required.
2. Attach the supplied #08-8B self-tapping screw to back box mounting
enclosure assembly for grounding.
NOTE: #08-8B self-tapping screw (2007277), supplied for grounding purposes, is
installed in the rear of the back box mounting enclosure assembly.
Mounting
Required Tools and Materials:
• #2 Phillips tip screwdriver or hammer
• Level
• Standard drywall screws or nails (not included)
CAUTION: Allow an air gap of at least 12 inches (30.48 cm) in the wall cavity
above and below the controller for heat dissipation.
NOTE: If your installation is not on wooden studs, be sure to consider the needs of
your particular situation. For example, screw type may vary for steel studs, etc.
Complete the following procedure (refer to illustrations on the next page) to mount
the back box.
1. Position the back box against the stud so that the extended edge of the
attached mounting plate covers the front edge of the stud. Be sure that the
side of the back box is also against the side of the stud.
2. Use the level and verify that the back box is horizontal. Leveling must be
done before proceeding.
3. Attach the back box to the left or right side of the stud with standard
drywall screws or nails (not included). If mounting to the left side of a stud,
the back box must be turned over so that the extended edge of the attached
mounting plate is on the right side.
4. Feed cables through knockout holes.
NOTE: This assembly should use Class 2 wiring only.
4 • Wall Mount Back Box: BB-1000L Installation Guide - DOC. 6060B
Crestron BB-1000L Wall Mount Back Box
Mounting the Back Box
BACK BOX MOUNTING
ENCLOSURE ASSEMBLY
(4505162)
ATTACHED
MOUNTING PLATE
NOTE: BE SURE THE
ASSEMBLY IS LEVEL WHEN
MOUNTED.
Mounted View with Cover Plate (Mounting Example Prior to Drywall Installation)
NOTE: BACK BOX IS TO BE
COVERED WITH DRYWALL
AND THEN THE CUTOUT
MADE AROUND THE INSIDE
OF THE OPENING.
BE SURE TO LEAVE THE
FOUR TAPPED HOLES ON
THE FRONT OF THE BOX
EXPOSED TO ACCEPT THE
MOUNTING SCREWS.
SCREWS (4) #04-40 x 2"
PAN HEAD (2018793)
COVER PLATE (2004826)
TO COVER CUTOUT IN DRYWALL
BEFORE CONTROLLER IS INSTALLED
(MAY BE REQUIRED BY LOCAL
BUILDING CODES)
ENSURE THAT THESE
SURFACES ARE FLUSH
Installation Guide - DOC. 6060B Wall Mount Back Box: BB-1000L • 5
Wall Mount Back Box Crestron BB-1000L
NOTE: Cut the drywall along the inside edge of the front of the back box. The
labels on the front of the back box indicate the perimeter of the opening that should
be cutout.
NOTE: The four tapped holes on the front of the back box must be exposed to
accept the controller mounting screws. These holes are found beneath the drywall
just outside the four corners of the opening made by cutting out the drywall. Refer
to the NOTE in “Mounted View with Cover Plate” shown on previous page.
Installation
Complete the installation by either installing the controller, leaving the hole open
(if permitted by local building codes) or installing the optional cover plate with the
included #04-40 x 2” screws. If the controller is to be installed, refer to the latest
revision of the APAD Installation and Operations Guide (Doc. 6455) for installation
instructions. The document is available from the Crestron website
(http://www.crestron.com/manuals). Refer also to the following comprehensive
illustration.
Controller Mounting – Exploded View
DRYWALL
BB-1000L
APAD
MOUNTING SCREWS
(4) #04-40 X 2"
(2018793)
6 • Wall Mount Back Box: BB-1000L Installation Guide - DOC. 6060B
Crestron BB-1000L Wall Mount Back Box
Other Mounting Option Accessories
If too much of the mounting plate is exposed after the drywall is cut, you may need
to patch the area. Crestron provides the following accessories:
• MMK-1000L (Doc. 6062) - for larger repairs and to fill in larger
irregularities around the opening (requires plastering).
• TMK-1000L (Doc. 6063) - for smaller repairs and to provide a smooth edge
at the opening. This option provides a finished appearance and is preferred
when wallpaper is hung.
The manuals for the MMK-1000L and TMK-1000L are available from the Crestron
website.
Installation Guide - DOC. 6060B Wall Mount Back Box: BB-1000L • 7
Wall Mount Back Box Crestron BB-1000L
Resources
Industry Compliance
This product is Listed to applicable UL Standards and requirements by Underwriters
Laboratories Inc.
(E227280)
As of the date of manufacture, the BB-1000L has been tested and found to comply
with specifications for CE marking marking and standards per EMC and
Radiocommunications Compliance Labelling.
Reference Documents
The latest version of all documents mentioned within the guide can be obtained from
the Crestron website (http://www.crestron.com/manuals). This link will provide a list
of product manuals arranged in alphabetical order by model number.
List of Related Reference Documents
DOCUMENT TITLE
APAD Wall Mount LCD Controller
MMK-1000L and WMKM-1000L Mud Mount Kits
TMK-1000L and WMKT-1000L Trim Ring Mount Kits
Further Inquiries
If you cannot locate specific information or have questions after reviewing this
guide, please take advantage of Crestron's award winning customer service team by
calling the Crestron corporate headquarters at 1-888-CRESTRON [1-888-273-7876].
For assistance in your local time zone, refer to the Crestron website
(www.crestron.com/offices
) for a listing of Crestron worldwide offices.
You can also log onto the online help section of the Crestron website
(www.crestron.com/onlinehelp
) to ask questions about Crestron products. First-time
users will need to establish a user account to fully benefit from all available features.
Future Updates
As Crestron adds improvements to the BB-1000L additional information may be
made available as manual updates. These updates are solely electronic and serve as
intermediary supplements prior to the release of a complete technical documentation
revision.
Check the Crestron website periodically for manual update availability and its
relevance. Updates are identified as an “Addendum” in the Download column.
8 • Wall Mount Back Box: BB-1000L Installation Guide - DOC. 6060B
Crestron BB-1000L Wall Mount Back Box
Return and Warranty Policies
Merchandise Returns / Repair Service
1. No merchandise may be returned for credit, exchange or service without prior authorization
from CRESTRON. To obtain warranty service for CRESTRON products, contact an
authorized CRESTRON dealer. Only authorized CRESTRON dealers may contact the factory
and request an RMA (Return Merchandise Authorization) number. Enclose a note specifying
the nature of the problem, name and phone number of contact person, RMA number and
return address.
2. Products may be returned for credit, exchange or service with a CRESTRON Return
Merchandise Authorization (RMA) number. Authorized returns must be shipped freight
prepaid to CRESTRON, 6 Volvo Drive, Rockleigh, N.J. or its authorized subsidiaries, with
RMA number clearly marked on the outside of all cartons. Shipments arriving freight collect
or without an RMA number shall be subject to refusal. CRESTRON reserves the right in its
sole and absolute discretion to charge a 15% restocking fee plus shipping costs on any
products returned with an RMA.
3. Return freight charges following repair of items under warranty shall be paid by CRESTRON,
shipping by standard ground carrier. In the event repairs are found to be non-warranty, return
freight costs shall be paid by the purchaser.
CRESTRON Limited Warranty
CRESTRON ELECTRONICS, Inc. warrants its products to be free from manufacturing defects in materials
and workmanship under normal use for a period of three (3) years from the date of purchase from
CRESTRON, with the following exceptions: disk drives and any other moving or rotating mechanical
parts, pan/tilt heads and power supplies are covered for a period of one (1) year; touchscreen display and
overlay components are covered for 90 days; batteries and incandescent lamps are not covered.
This warranty extends to products purchased directly from CRESTRON or an authorized CRESTRON
dealer. Purchasers should inquire of the dealer regarding the nature and extent of the dealer's warranty, if
any.
CRESTRON shall not be liable to honor the terms of this warranty if the product has been used in any
application other than that for which it was intended or if it has been subjected to misuse, accidental
damage, modification or improper installation procedures. Furthermore, this warranty does not cover any
product that has had the serial number altered, defaced or removed.
This warranty shall be the sole and exclusive remedy to the original purchaser. In no event shall
CRESTRON be liable for incidental or consequential damages of any kind (property or economic damages
inclusive) arising from the sale or use of this equipment. CRESTRON is not liable for any claim made by a
third party or made by the purchaser for a third party.
CRESTRON shall, at its option, repair or replace any product found defective, without charge for parts or
labor. Repaired or replaced equipment and parts supplied under this warranty shall be covered only by the
unexpired portion of the warranty.
Except as expressly set forth in this warranty, CRESTRON makes no other warranties, expressed or
implied, nor authorizes any other party to offer any warranty, including any implied warranties of
merchantability or fitness for a particular purpose. Any implied warranties that may be imposed by law are
limited to the terms of this limited warranty. This warranty statement supersedes all previous warranties.
Trademark Information
All brand names, product names and trademarks are the sole property of their respective owners. Windows is a registered trademark
of Microsoft Corporation. Windows95/98/Me/XP/Vista and WindowsNT/2000 are trademarks of Microsoft Corporation.
Installation Guide - DOC. 6060B Wall Mount Back Box: BB-1000L • 9
Crestron Electronics, Inc. Installation Guide – DOC. 6060B
15 Volvo Drive Rockleigh, NJ 07647 (2002104)
Tel: 888.CRESTRON 01.08
Fax: 201.767.7576 Specifications subject to
www.crestron.com change without notice.
/
