Watlow Series 180 is a heat-sensing temperature controller that uses the principle of change in resistance of the heater with temperature to provide the feedback signal to the controller to maintain a constant temperature. This device is capable of field calibration and can be used with any Balco wire heater within the specified resistance range. The heater resistance range can be conveniently selected by the user by placing a single solderless jumper strip. Control output is 3kw at 115VAC 10%, 50/60 Hz. and 6kw at 230VAC + 10%, 50/60 Hz. for full-wave operation.
Watlow Series 180 is a heat-sensing temperature controller that uses the principle of change in resistance of the heater with temperature to provide the feedback signal to the controller to maintain a constant temperature. This device is capable of field calibration and can be used with any Balco wire heater within the specified resistance range. The heater resistance range can be conveniently selected by the user by placing a single solderless jumper strip. Control output is 3kw at 115VAC 10%, 50/60 Hz. and 6kw at 230VAC + 10%, 50/60 Hz. for full-wave operation.
-
1
-
2
-
3
-
4
-
5
-
6
Watlow Series 180 is a heat-sensing temperature controller that uses the principle of change in resistance of the heater with temperature to provide the feedback signal to the controller to maintain a constant temperature. This device is capable of field calibration and can be used with any Balco wire heater within the specified resistance range. The heater resistance range can be conveniently selected by the user by placing a single solderless jumper strip. Control output is 3kw at 115VAC 10%, 50/60 Hz. and 6kw at 230VAC + 10%, 50/60 Hz. for full-wave operation.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
