Charge
1
Quick start guide
Philips Portable DVD Player PET738
3 OPEN HERE
2
Enjoy
1
2
1 Connect the supplied adapter to the set and
the AC outlet.
2 RED light turns on.
3 The RED light comes on.
4 The battery pack will be fully charged in
approximately 4 hours.When the RED light
goes out, it means that the battery pack is fully
charged.
TIP Your battery will continue to charge while
the player is in use. However, the RED light will
not be lit and it will take approximately 8 hours to
fully charge the battery pack.
1 Open the lid.
2 Switch ON the set.
3 The GREEN light turns on.
4 Open the DVD door by pressing
the OPEN.
5 Remove protective card (if any).
6 Load the DVD disc.
7 Close the DVD door and the set
will automatically start to
playback.
8 Use control keys on the set or
remote control.
1
2
8
7
6
4
3
3
Analog TV
Antenna connection
Before you start to search for TV channels, connect the
DVD player to the antenna as shown.
Setup you TV
1 Press OPTIONS and select SOURCES > TV.
2 In TV mode, press SETUP, the TV Setup menu
will be displayed to show the following available
functions.
3 Use 3 / 4 key to select AUTO SEARCH, then
press OK.The system will remind you to select
area first.
4 Use 3 / 4 key to select your country.
When area is set, the system will start auto search.
After search is completed, the first channel found
will be displayed.
Enjoy TV
Press CH-/CH+ to change channels.
tv setup menu
tv mode
setup exit
auto search
ch. manage
fine tuning
setup exit
china
setup exit
russia
usa
hongkong
india
PET738 QSG_Eng.qxd 2007.11.5 11:15 Page 1
-
1
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Polaroid PDM-0817 User manual
-
Insignia I-PD720 User manual
-
Audiovox D1708PK User manual
-
-
-
Toshiba Handheld TV SD-P120DTKE User manual
-
Lenco DVP-941 User manual
-
-
Toshiba SDP94DTWB Owner's manual
-
Pioneer PDV-LC20 User manual