Simmons SD 100 User manual

Simmons
Brand
Simmons
Model
SD 100
Category
Music drums
Type
User manual

This manual is also suitable for

owner’s manual
www.simmonsdrums.net
Electronic Drum Kit
www.SimmonsDrums.net
2
SD100KIT
Electronic Drum Kit owner’s manual
safety instructions
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in accordance
with the manufacturer’s instructions.
8) Do not install near the heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers) that
produce heat.
9) Do not defeat the safety purpose of the polarized or grounding-
type plug. A polarized plug has two blades with one wider than
the other. A grounding type plug has two blades and a third
grounding prong. The wide blade or the third prong are provided
for your safety, if the provided plug does not fit into your outlet,
consult an electrician for replacement of the obsolete outlet.
10) Protect the power cord from being walked on or pinched
particularly at plugs convenience receptacles, and the point
where they exit from the apparatus.
11) Only use attachments/accessories specified by the manufacturer.
12) Unplug this apparatus during lightning
storms or when unused for a long periods of time.
13) Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way,
such as power-supply cord or plug is damaged, liquid has been
spilled or objects have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does not operate
normally, or has been dropped.
WARNING: To reduce the risk of fire or electric shock, do not
expose this apparatus to rain or moisture.
CAUTION: Apparatus shall not be exposed to dripping or splashing
and no objects filled with liquids, such as vases, shall be placed on
the apparatus.
THE LIGHTNING FLASH WITH ARROWHEAD SYMBOL WITHIN AN EQUILATERAL TRIANGLE IS INTENDED
TO ALERT THE USER TO THE PRESENCE OF UNINSULATED DANGEROUS VOLTAGE WITHIN THE PRODUCTS
ENCLOSURE THAT MAY BE OF SUFFICIENT MAGNITUDE TO CONSTITUTE A RISK OF ELECTRIC SHOCK
TO PERSONS.
APPARATUS SHALL NOT BE EXPOSED TO DRIPPING OR SPLASHING AND THAT NO OBJECTS FILLED
WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE APPARATUS.
THE EXCLAMATION POINT WITHIN AN EQUILATERAL TRIANGLE IS INTENDED TO ALERT THE USER TO
THE PRESENCE OF IMPORTANT OPERATING AND MAINTENANCE(SERVICING) INSTRUCTIONS IN THE
LITERATURE ACCOMPANYING THE PRODUCT.
3
www.SimmonsDrums.net
Table of Contents
Safety Instructions 2
Assembled Kit 4
Panel Controls
Top Panel 5
LED Display 5
Rear Panel 6
Assembly Instructions 7, 8
Connections
Connecting the Pads 9
Connecting the Power Supply 10
Connecting CD/MP3 Player 10
Connecting USB MIDI 10
Connecting Headphones 10
Getting Started
Switching Power On 11
Setting the Volume 11
Selecting Drum Kits 11
The [KIT] Button 11
Selecting a Voice 12
The [CLICK] Button 12
The [REC/PLAY] Button 13
The [SONG] Button 13
The [TEMPO/TAP] Button 14
Factory Settings 15
Drum Kit Presets
Preset Drum Kit List 16
Song Style List 16
Drum Sound List 17
MIDI Implementation Chart 18
Specifications 19
Warranty 19
4
SD100KIT
Electronic Drum Kit owner’s manual
ASSEMBLED KIT
5
www.SimmonsDrums.net
PANEL CONTROLS
Top Panel
LED Display
The LED indicates the SONG, PAD or KIT status. When SONG is
selected, the song number appears in the display. When PAD is
selected, the pad name such as Snare, Crash, and Tom, etc. will
appear. Press the KIT button and the drum kit number will be
displayed on the LED.
1
[+] / [–] Value Control Buttons
Use these buttons to navigate through the 10 drum kits, switch
menu selections, or change parameter values.
2
[TEMPO/TAP] Button
Adjusts the tempo of the built-in metronome, the practice songs,
or the song you are recording. You can also set the tempo by
tapping this button repeatedly.
3
LED Display
Takes you to the mode where you are able to change the kit, song
and voice.
4
[CLICK] Button
Turns the metronome on and off at any time. It’s also used to
change the click settings such as time signature and click volume.
5
[REC/PLAY] Button
Gives you the option to record or play back your
own performance.
6
[SONG] Button
Enters the song select display. You can mute the drum part and
adjust the song’s volume. See page 14.
7
[KIT] Button
Enters the kit selection.
8
ON/OFF Button
SONG mode
PAD mode
1
4
2
8
7
3
5 6
KIT mode
6
SD100KIT
Electronic Drum Kit owner’s manual
PANEL CONTROLS
Rear Panel
9
Pad Connection
Control cable connects the pads and the pedals to
the module.
10
USB
Connect to a computer for two-way MIDI communication. This
will enable a software program to trigger the drum module
sounds, or allow you to use the module as a MIDI trigger
interface for the software’s virtual drum instruments.
11
DC
Connect the AC adapter cable to an outlet to run power to
the SD100KIT.
12
Line In
You can connect the output of an external audio device to this
jack. (stereo 3.5mm). This is convenient for playing along with
music from a CD or MP3 player.
13
Line Out
Use this output to connect to external speakers or a mixing
board (stereo 3.5 mm).
10 12
13
11
9
7
www.SimmonsDrums.net
Assembly instructions
Step 1:
Remove the pad/module from the packing. Attach the front steel
tube unit to the pad/module with 2 provided screws and tighten.
(For better leverage and visibility, you may want to compete this
step with module/pad turned upside down).
Step 2:
Insert the back steel drum legs into the pad/module securely as
shown, and tighten each with the provided screws.
Step 4:
Insert the cymbal L-arm mounts into their respective holes as shown
and tighten each of the hex wingnuts. Use large knob on the left to
tighten the arm mount.
Step 3:
Insert the snare pad onto the snare rod mount as shown, and tighten
the wingnut.
8
SD100KIT
Electronic Drum Kit owner’s manual
Assembly instructions
Step 7:
Locate the hi-hat drum pedal and insert into bottom of left leg.
Tighten with hex wingnut screw.
Step 8:
Assembly complete.
C
Step 6:
Locate the kick drum pedal and insert into bottom of right leg.
Tighten with hex wingnut screw.
Step 5:
Assemble hi-hat, crash and ride cymbal pads as shown and tighten
the hex wingnuts.
9
www.SimmonsDrums.net
connections
Connecting the Pads
With the drum kit set up correctly, next connect the multi-pin cable into the pad connection port on back panel of module as shown.
Then connect each of the labeled cables into their respective inputs. (Each cable is labeled as the cables can vary in length and type.)
10
SD100KIT
Electronic Drum Kit owner’s manual
Connecting the Power Supply
Connect the AC power adapter to a wall socket as shown at right.
Connecting CD/MP3 Player
The audio output from a CD/MP3 player connected to the LINE-IN jack
on the rear panel can be mixed with the sound of the drum module. This is
ideal if you want to play along with songs or follow an audio drum tutorial.
The volume of the external signal is adjusted with the MASTER
VOLUME knob.
Connecting USB MIDI
Your drum module is USB class-compliant. This means you can plug it
into a USB class compliant host (for example, a computer running OS
X, Windows XP, Vista or Windows 7) and it should be recognized
immediately. There are no drivers to install; simply plug n’ play.
If you connect the drum module to a computer, you can trigger software
programs or record your performance into a MIDI sequencing application.
Check the operation and setup instructions for the software you intend to
use for more details.
USB cable not included.
Connecting Headphones
Your headphones can be connected to the SD100KIT. The headphone
jack is located on the left side of module base under the Hi-Hat Pad. Use
the MASTER VOLUME knob to adjust the headphone volume.
AUX INPUT
—
OUTPUT
—
R
L/MONO
AUX INPUT
—
OUTPUT
—
R
L/MONO
AUX INPUT
—
OUTPUT
—
R
L/MONO
AUX INPUT
—
OUTPUT
—
R
L/MONO
connections
11
www.SimmonsDrums.net
getting started
Switching the Power On
Locate the ON/OFF power button on the drum module and switch
the power ON. The drum module is ready to operate when the
display shown to the right appears. This is the location from which
you select the drum kit you want to play or edit.
Power saving option: Your SD100KIT will automatically turn off
after 30 minutes of non use. (See page 15 for reference)
SON = Power saving ON. SOF = Power saving OFF.
(Factory default should be set to OFF)
Setting the Volume
Use the MASTER VOLUME knob to adjust the volume.
Selecting Drum Kits
Press the [KIT] button. The current kit number will appear and you
can use the [+] or [-] buttons to select kits ranging from: 001-010,
USER. In the USER kit location you can store your own settings for
recall later.
The [KIT] Button
Press the [KIT] button and press the [+] or [-] button to adjust the
volume of pads. Range: 0-127. Select a pad by hitting it.
12
SD100KIT
Electronic Drum Kit owner’s manual
getting started
Selecting A Voice
Press the [KIT] and [REC/PLAY] buttons simultaneously, then hit a
pad that you want to change the voice for and use the [+] or [-]
buttons to select the voice.
For example: to select a TOM1 voice, press the [KIT] and [REC/
PLAY] buttons. The LED will display the current drum number. Hit
the TOM1 and the LED displays as shown to the right, then the LED
displays TOM1 instrument.
Hit another pad to select and use the [+] or [-] buttons to select the
Voice. You also can press the [CLICK] button to listen to the voice.
Finally press the [REC/PLAY] button to save your settings in the user kit.
Press any other button to exit the menu.
The [CLICK] Button
Click Type
Press [CLICK] button for 2 seconds to enter the metronome type
choice,use [+/-] to select click type: 1/4, 2/4, 3/4, 4/4, 6/4, 3/8,
6/8, 12/8. default: 4/4.
Click Sound
When click is on, press and hold the [CLICK] button and use [+]
or [-] buttons to select the click sound. You have 3 sound options:
001-003.
Click Volume
When click is OFF, press and hold the [CLICK] button and use [+] or
[-] buttons to select click volume, range: 000-032.
13
www.SimmonsDrums.net
getting started
The [REC/PLAY] Button
Recording
Press and hold the [REC/PLAY] button for 2 seconds. Recording
will start after you hear one bar of metronome hits.
Press [REC/PLAY] button again to stop recording.
Play Back the Recording
Press the [REC/PLAY] button to play back your recording. Press the
[REC/PLAY] button again to stop playback.
The [SONG] Button
The SD100KIT contains 10 preset songs and 1 Demo. Press the
[SONG] and [KIT] buttons simultaneously to start or stop the song.
Drum On/Off
In [SONG] mode, press and hold the [SONG] button for 2 seconds,
LED displays “ON” or “OFF”.
On – turn on the drum track of the song.
Off – turn off the drum track of the song.
Select the songs
Press the [SONG] button, then use [+] or [-]
buttons to select any of the 10 songs.
REC / PLAY KIT SONG
VOICE START
Hold down to
mute drum
14
SD100KIT
Electronic Drum Kit owner’s manual
getting started
Song Volume
In [SONG] mode, press and hold the [SONG] button and use [+] or [-] buttons to adjust
the song volume. Range:000-032.
The [TEMPO/TAP] Button
There are 2 ways you can adjust tempo in the SD100KIT.
Press the [TEMPO/TAP] button. The LED displays the current tempo so use [+] or [-] buttons
to adjust tempo value. Range: 020-240
Press the [TEMPO/TAP] button for 2 seconds to enter the
TAP mode. The LED display will blink.
Now hit on a pad 4 times rhythmically to change the tempo.
15
www.SimmonsDrums.net
factory settings
To restore your settings to the factory default, do the following:
Turn off the power. Hold down the [+] and [-] buttons with one hand,
then turn the power on. This will reset your module to factory setup
and erase all your settings.
Setup functions.
Here you can adjust some of the global parameters to suit your
playing style.
Turn off the power.
Set-Up Mode:
Hold down [KIT] button, then turn the power on to enter setup
mode.
Sensitivity:
Press [TEMPO/TAP] button, use [+] or [-] buttons to set sensitivity.
Range: 001-008
Threshold:
Press [KIT] button, use [+] or [-] buttons to set threshold.
Range: 000-050
Velocity Curve:
Press [SONG] button, use [+] or [-] buttons to set velocity curve.
There are four velocity curves from which to choose:
Normal (NOR), Dynamic (DYN), EASY (ESY), and Fixed (FID).
Cross Talk:
Press [CLICK] button, use [+] or [-] buttons to set XTALK .
Range: 000-080
Saving Set-up Functions:
Press [REC/PLAY] buttons to save above settings.
Power saving option:
Your SD100KIT will automatically turn off after 30 minutes of
non-use. To switch the power saving mode on or off, hold down
the (KIT) button, then turn the power on to enter setup mode.
While in set up mode, press the (REC/PLAY) button and hold for
2 seconds. (Factory default is set to off).
SON = Power saving ON. SOF = Power saving OFF.
REC / PL AY KIT SONG
VOICE START
INC +
DEC
-
Hold down to
mute drum
REC / PL AY KIT SONG
VOICE START
Hold down to
mute drum
16
SD100KIT
Electronic Drum Kit owner’s manual
drum kit PRESETs
Kit # Kit Name
Kit 1 Maple
Kit 2 Funk 1
Kit 3 Studio
Kit 4 Hip Hop
Kit 5 Metal
Kit 6 Simmons
Kit 7 Jazz
Kit 8 Latin Percussion
Kit 9 LA Funk Rock
Kit 10 Techno
Kit 11 User Kit
Style # Style Name
d–1
01
Demo Song
Bonz Beat
02 Blues Beat
03 Black Magic
04 Alt Rock
05 Funky Strut
06 Hip Hop
07 Funky D
08 Tech Step
09 Metalhead
10 Jazz Walk
Preset Drum Kit List
Song Style List
17
www.SimmonsDrums.net
drum kit PRESETs
Drum Sound List
KICK
BD_Maple
BD_HeavyMetal
BD_Jazz
BD_LAFunkRock
BD_Metal
BD_MetalGuitar-Kick
BD_Studio
BD_Thickick
BD_Vintage
EDRM_BD-HipHopcp1
EDRM_BD-Techno1Cp
EDRM_BD808Kick
BD_Banzai_Kick
BD_WahKick
BD_PunchKick
SNARE
SD_Aluminum_Center
SD_Aluminum_CS
SD_Aluminum_RS
SD_BellBrass_center
SD_BellBrass_CS
SD_BellBrass_RS
SD_Brass_RS
SD_Brass-center
SD_Brass-CS
SD_BrushSnare-center
SD_BrushSnare-Rim
SD_DeepBrass-Center
SD_DeepBrass-CS
SD_DeepBrass-RS
SD_Funk1_CenterA
SD_HeavyMetal
SD_LAFunkrock_CenterA
SD_LAFunkrock_CS
SD_LAFunkrock_RS
SD_Maple_CenterA
SD_Maple_RS
SD_Metal-CenterA
SD_Metal-CS
SD_Metal-RS
SD_ShallowBrass-Center
SD_ShallowBrass-CS
SD_ShallowBrass-RS
SD_ShallowWood-CenterA
SD_ShallowWood-CS
SD_ShallowWood-RS
SD_SteelSnare_Center
SD_SteelSnare_CS
SD_SteelSnare_RS
SD_SteelSnare2-Center
SD_SteelSnare2-CS
SD_SteelSnare2-RS
SD_Studio_CenterA
SD_Studio_CS
SD_Studio_RS
SD_Vintage
EDRM_SD-HipHopcp1
EDRM_SD-Techno1Cp
SD_SynthSnare
SD_LoFiSnare
SD_HipHopSnare
TOM
TOM_Brush-Hi
TOM_Brush-Lo
TOM_HeavyMetal-Hi
TOM_HeavyMetal-Low
TOM_HeavyMetal-Mid
TOM_LAFunk_Hi
TOM_LAFunk_Low
TOM_LAFunk_Mid
TOM_Maple_Hi
TOM_Maple_Low
TOM_Maple_Mid
TOM_Metal-Hi
TOM_Metal-Low
TOM_Metal-Mid
TOM_Studio_Hi
TOM_Studio_Low
TOM_Studio_Mid
TOM_Vintage-Hi
TOM_Vintage-Low
TOM_Vintage-Mid
EDRM_Simmons_Tom1Cp-Hi
EDRM_Simmons_Tom1Cp-Low
EDRM_Simmons_Tom1Cp-Mid
EDRM_Simmons_Tom1Cp
EDRM_Tom-Techno1-Hi
EDRM_Tom-Techno1-Low
EDRM_Tom-Techno1-Mid
EDRM_Simmons_Kick1Cp
EDRM_Simmons_Snare1Cp
CYMBALS
CYM_China
CYM_Crash1
CYM_Crash2
CYM_Ride-MetalPingA
CYM_Ride1-BellA
CYM_Ride1-BowA-0
CYM_Ride1-BowA
CYM_Ride2-BellA
CYM_Ride2-Bow
CYM_Ride2-CrashEdge
ECYM_808Cymbal
ECYM_Ride-Simmons1
ECYM_Simmons_Crash1cp
ECYM_Techno_CrashChinaElec
ECYM_SimmonsRide
HI HAT
CYM_HH1-Closed-0
CYM_HH1-Closed-1
CYM_HH1-Foot-0
CYM_HH1-Foot-1
CYM_HH1-Open-0
CYM_HH1-Open-1
CYM_HH2-Closed
CYM_HH2-Foot
CYM_HH2-Open
CYM_HH3-Closed
CYM_HH3-Foot
CYM_HH3-Open
ECYM_HH-Foot
ECYM_HHClosed4
ECYM_HipHopHHClsd1
ECYM_HipHopHHOpen1
ECYM_SimmonsHHOpen03
ECYM_Techno_ClsdHH2cp
ECYM_Techno_OpenHH1Cp
PERCUSSION
PERC_Agogo-Large
PERC_Agogo-Small
PERC_Bongo-Large
PERC_Bongo-Small
PERC_Cabasa
PERC_Clave
PERC_Conga-Slap
PERC_Conga
PERC_Cowbell_Open
PERC_Cowbell-
Mute2Open
PERC_Guiro
PERC_Marcas
PERC_Quica-Down
PERC_Quica-Hi_tone
PERC_Shaker
PERC_Sleighbells
PERC_Small
PERC_Surdo
PERC_Tambourine-Slap
PERC_Timbale-Hi
PERC_Timbale
PERC_Triangle-Mute
PERC_Triangle-
Mute2Open
PERC_Triangle-Open
PERC_Tumba-Open-Slap
PERC_Tumba-Slap
PERC_Tumba
PERC_Vibraslap
PERC_Whistle-Long
PERC_Whistle
PERC_Woodblock-Lo
PERC_Woodblock
EPERC_808claps
EPERC_808Conga
EPERC_808Cowbell
EPERC_BigClap
EPERC_Bleep
EPERC_FilterSnap
EPERC_Kling
EPERC_Ping
EPERC_Punch
EPERC_PsychoRainstick
PERC_BigDrum
PERC_CongaTumba
BD_ElectroKick
EPERC_DigitalChimes
EPERC_Bass-SlapPhrase3
KEYBOARD SOUNDS
AC Bass
Synth Bass 1
Synth Bass 2
Synth Bass 4
Synth Bass 3
Synth Bass 5
Slap Bass
Strut Guitar
Distorted Guitar
Wah Wah
Muted Stock
Distorted Stock
Crunch Guitar
Acoustic Piano
Ep1
Horn Section
Organ 1
Organ 2
Synth 1
KITS
Maple
Funk 1
Studio
Hip Hop
Metal
Simmons
Jazz
Latin Percussion
LA Funk Rock
Techno
User Kit
www.SimmonsDrums.net
18
SD100KIT
Electronic Drum Kit owner’s manual
Function Transmitted Recognized Remarks
Basic
Channel
Default
Changed
10CH
X
1-16
1-16 each
Memorized
Mode Default
Messages
Altered
Mode 3
X
**************
Mode 3
X
X
Note Number True Voice 0–127
**************
0–127
0–127
Velocity Note ON
Note OFF
O (99H, V=1–127)
O (89H, V=0)
O (9nH, V=1–127)
O (8nH, V=0) or 8nH
Aftertouch X X
Pitch Blend X O
Control Change 0, 32
1
5
6
7
10
11
64
65
66
67
80, 81
91, 93
100, 101
121
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
O
O
O
O
O
O
O
O
O
O
O
O
O
O (*1)
O
Bank Select
Modulation
Portamento Time
Data Entry
Volume
Pan
Expression
Sustain
Portamento
Sostenuto
Soft Pedal
DSP TYPE
DSP DEPTH
RPN LSB, MSB
Reset all Controllers
Program Change
True member
O 0-10 O 0-127
0-127
System Exclusive X X
System
Common
:Song Position
:Song Select
:Tune
X
X
X
X
X
X
System
Real Time
:Clock
:Commands
X
X
X
X
Aux
Messages
:Local ON/OFF
:All Notes OFF
:Active Sense
:Reset
X
X
X
X
X
O
X
O
All Notes OFF is sent as
All Sound OFF (CC# 120)
O: YES X: NO
*1: Registered parameter number: #0: Pitch sensitivity, #1: Fine tuning, #2: Coarse tuning Model 1: OMNI ON, POLY
Mode 2: OMNI ON, MONO
Mode 3: OMNI OFF, POLY
Mode 4: OMNI OFF, MONO
midi implementation chart
19
www.SimmonsDrums.net
Pads
7 drum pads with touch response and includes two pedals for bass drum and hi-hat
Sounds
170 percussion voices
Drum Sets
10 preset sets, 1 User set
Songs
10 songs and one demo
Overall Controls
Tempo, Main Volume
Metronome
Voice, Click or Light
Connections
9V adapter, head phones, USB to host (MIDI IN/OUT), bass drum and hi-hat controller
Dimensions
709.93mm (W) x 230.12mm (D) x 812.29mm (H)
27.95” (W) x 9.06” (D) x 31.98” (H)
Weight
8.2kgs
Power Supply
9V adapter
Accessories
Drum sticks, two controller pedals
SPECIFICATIONS
warranty
FCC Statements
1. Caution: Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.
2. Note: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a different circuit.
•Consult an experienced radio/TV technician for help.
Two (2) Year Limited Warranty
Subject to the limitations set forth below, Simmons
®
hereby represents and warrants
that the components of this product shall be free from defects in workmanship and
materials, including implied warranties of merchantability or fitness for a particular
purpose, subject to normal use and service, for two (2) years to the original owner
from the date of purchase.
Retailer and manufacturer shall not be liable for damages based upon inconve-
nience, loss of use of product, loss of time, interrupted operation or commercial
loss or any other incidental or consequential damages including but not limited to
lost profits, downtime, goodwill, damage to or replacement of equipment and property,
and any costs of recovering, reprogramming, or reproducing any program or data stored
in equipment that is used with Simmons
®
products. This guarantee gives you specific le-
gal rights. You may have other legal rights which vary from state to state. Some states do
not allow limitations on how long an implied warranty lasts, so the above limitation
may not apply to you.
Simmons
P.O. Box 5111
Thousand Oaks, CA 91359-5111
All trademarks and registered trademarks mentioned herein are recognized as the
property of their respective holders.
Made in China
1608-10272
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20

Simmons SD 100 User manual

Simmons
Brand
Simmons
Model
SD 100
Category
Music drums
Type
User manual
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents