HobartWelders RUNNING GEAR/CYLINDER RACK Owner's manual

HobartWelders
Brand
HobartWelders
Model
RUNNING GEAR/CYLINDER RACK
Type
Owner's manual

This manual is also suitable for

HobartWelders HANDLER RUNNING GEAR/CYLINDER RACK 194776 is a sturdy and versatile piece of equipment designed to support and transport welding cylinders safely and efficiently. With its durable construction and thoughtful design, this running gear/cylinder rack offers a range of benefits for professional welders and hobbyists alike.

The unit features a sturdy bottom tray, support frame, casters, and axle with wheels, providing a stable base for mounting and transporting cylinders. The bottle bracket securely holds the cylinder in place, preventing it from tipping or falling. The top tray provides additional storage space for tools and accessories, keeping them within easy reach.

HobartWelders HANDLER RUNNING GEAR/CYLINDER RACK 194776 is a sturdy and versatile piece of equipment designed to support and transport welding cylinders safely and efficiently. With its durable construction and thoughtful design, this running gear/cylinder rack offers a range of benefits for professional welders and hobbyists alike.

The unit features a sturdy bottom tray, support frame, casters, and axle with wheels, providing a stable base for mounting and transporting cylinders. The bottle bracket securely holds the cylinder in place, preventing it from tipping or falling. The top tray provides additional storage space for tools and accessories, keeping them within easy reach.

OWNER’S MANUAL
© 2004 Hobart Welding Products
FORM: OM-6609 200 124C
September 2004
Running Gear/Cylinder Rack (194 776)
WARNING
ELECTRIC SHOCK can kill.
• Do not touch live electrical parts.
• Turn Off welding power source and input disconnect
device.
• Disconnect input plug or power conductors from
deenergized supply BEFORE moving welding
power source.
CYLINDERS can explode if damaged.
• Keep cylinders away from welding and other
electrical circuits.
• Never touch cylinder with welding electrode.
• Always secure cylinder to running gear, wall, or
other stationary support.
FALLING EQUIPMENT can cause injury
and damage, OVERSIZED CYLINDER
can cause tipping.
• Move unit with proper handcart.
• If using a fork lift vehicle, secure unit on a skid.
• Never lift unit with cylinder attached.
• Maximum cylinder weight is 75 lb (34 kg).
194 776
Assembly order:
1 Assemble bottom tray, casters, axle
and wheels to frame supports.
2 Install bottle bracket by hooking it
through bottom tray slot.
3 Install top tray to frame supports and
bottle bracket.
Tools Needed:
Description (Qty)
Part
No.
Item
No.
1 200 089 Bottom Tray (1). . . . . . .
2 200 112 Support Frame (2). . . . . . .
3 199 961 Caster (2). . . . . . .
4 200 092 Bottle Bracket (1). . . . . . .
5 200 091 Top Tray (1). . . . . . .
6 208 983 Axle (1). . . . . . .
7 208 985 Wheel, 6 in (2). . . . . . .
8 200 120 Chain, 24 in (1). . . . . . .
9 200 121 Tubing Plug (4). . . . . . .
10 217 737 Warning Label (1). . . . . . .
200 122 Hardware Kit. . . . . .
(consisting of). . . . . . . . . . . . .
11 Nut, M-8 (2). . . . . . . . . . . . . .
12 Lockwasher, M-8 (2). . . . . . . . . . . . . .
13 Flat Washer, M-8 (2). . . . . . . . . . . . . .
14 Cotter Pin (2). . . . . . . . . . . . . .
15 Spacer (2). . . . . . . . . . . . . .
16 Flat Washer, M-12 (4). . . . . . . . . . . . . .
17 Screw,. . . . . . . . . . . . . .
10-16x5/8 in (8). . . . . . . . . . . . . .
18 Screw, M-5x12 (2). . . . . . . . . . . . . .
19 Nut, M-5 (2). . . . . . . . . . . . . .
Be sure to provide Model when ordering
replacement parts.
14 mm
1
6
10
9
7
14
8
4
19
2
3
13
5
3
2
17
18
17
9
17
17
9
15
16
11
12
12
11
13
Figure 1. Assembly Of Running Gear/Cylinder Rack
  • Page 1 1

HobartWelders RUNNING GEAR/CYLINDER RACK Owner's manual

HobartWelders
Brand
HobartWelders
Model
RUNNING GEAR/CYLINDER RACK
Type
Owner's manual
This manual is also suitable for

HobartWelders HANDLER RUNNING GEAR/CYLINDER RACK 194776 is a sturdy and versatile piece of equipment designed to support and transport welding cylinders safely and efficiently. With its durable construction and thoughtful design, this running gear/cylinder rack offers a range of benefits for professional welders and hobbyists alike.

The unit features a sturdy bottom tray, support frame, casters, and axle with wheels, providing a stable base for mounting and transporting cylinders. The bottle bracket securely holds the cylinder in place, preventing it from tipping or falling. The top tray provides additional storage space for tools and accessories, keeping them within easy reach.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents