Car Air Vent Mount
Instructions
Product features:
1. Designed for the dierent thickness air outlet vane, with a wide applicability
2. 360° swivel ball joint applicability
3. Compatible with most mobile phones, GPS and other mobile devices
4. Nice and elegant design, easy to install, no tools needed
5. Easy touch open the clamps, one hand operation when driving
Accessories:
Bracket
Air vent mount
Note: There are three locking positions to t dierent
thickness of outlet fence,pls choose the best position
for your car
4
0.025 inch
0.1 inch
0.1 inch
0.4 inch
Install instructions:
Easy touch button to
open the clamps
4.4 inch
1. Insert the ball joint into the ball
joint adapter.
2. Align the ball joint with the ball
socket, squeeze gently, turn the
adjuster to tighten.
3. Insert the clip into the vent as
much as possible, so that the end
of the clip hooks the the vent blade,
thus the phone holder is not easy to
fall o !
5. Press the release button to release
the clamp arms.
6. Place your device into the bracket
and press the clamp arms to lock it
tightly.
4. Press down the locking switch
to secure the clip.
Insert the clip into the vent as much as possible, so that the
end of the clip hooks the the vent blade, thus the phone holder
is not easy to fall o !
Important notice:
/
