Directions for operating Silicon Pipette Filler
1) Press Button “A” at top of filler and squeeze bulb to evacuate air from the bulb.
2) Release Button “A” once air is evacuated from bulb.
3) Press Button “S” located under bulb to pull liquid into pipette.
4) Press “E” button located on the extending portion of the Pipette Filler to empty the
pipette.
5) Squeeze the bulb located directly under “S” valve to expend any remaining liquid
from bulb.
sales@novatech-usa.com
www.novatech-usa.com
Tel: (866) 433-6682 Fax: (866) 433-6684
Tel: (281) 359-8538 Fax: (281) 359-0084
/
