Kenmore 417-41912F Quick start guide

Kenmore
Brand
Kenmore
Model
417-41912F
Type
Quick start guide
Position dispenser fl ap to match your detergent. Power ON and Power OFF
Important installation steps to verify:
Complete your installation with these accessories:
Your 4 compartment product dispenser up close:
Install inlet hoses correctly:
132898351A (1512)
Flap DOWN for liquid.Flap OVER for powder.
Color matching storage pedestal. Stacking kit with pullout work tray.
Kenmore
®
approved inlet hoses.
Universal appliance wrench.
®
White Pedestal - SEARS ITEM# 184121
Stacking Kit - SEARS ITEM# 18004
Wrench - P/N 137019200
Standard (Rubber, 4 ft.)
SEARS ITEM# 26-52535
Premium (Stainless Steel, 6 ft.)
SEARS ITEM# 26-58027
prewash
compartment
bleach
compartment
mainwash
compartment
fabric softener
compartment
Quickstart Guide for your new Kenmore
®
compact front load washer:
NOTE
If detergent fl ap is mounted in the rearward set of
holes, you will have to “unlock” the drawer and pull it
out slightly to reposition the fl ap.
HOT
COLD
Connect the HOT inlet hose to the HOT inlet connection
on the washer and the COLD inlet hose to the COLD
inlet connection on the washer. Tighten by hand until
snug. Then tighten each supply connection another 2/3
turn with pliers. Do not cross thread or over-tighten these
connections. Turn on water and check for leaks.
Power ON - To turn on your washer, press and release the
POWER button.
Power OFF - To turn off your washer, press and hold the
POWER button until the unit shuts down.
x 3
x 3
x 2
Remove shipping hardware:
Remove all of the following from the
back of the washer:
• 3 shipping bolts
• 2 plastic clamps
• 3 shipping spacers
Page is loading ...
  • Page 1 1
  • Page 2 2

Kenmore 417-41912F Quick start guide

Kenmore
Brand
Kenmore
Model
417-41912F
Type
Quick start guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents