Get the performance of an internal hard drive with
portability and active cooling
Keep your data safe and cool in Antec’s MX-1 portable Hard Drive enclosure. Features a blower fan to keep your drive
running cool, and allowing you to operate the enclosure continuously as if it were an internal hard drive. Simply install
your drive, connect it to your computer and start transferring your data at blazing speeds over USB2.0 or eSATA- there’s
no need to install drivers. The MX-1 is made with a special dual-layer design that reduces noise and is lightweight for
easy transporting.
UCC13# 0761345-77150-4 US
UCC13# 0761345-00700-9 EC
UCC13# 0761345-00701-6 UK
Special Features:
• Dual output interface – USB2.0 and eSATA (external
Serial ATA) allows you to transfer data up to
480Mbps or 3Gbps respectively
• Supports up to 1TB SATA hard disk drive
• Unique HDD cooler brings fresh air in and around the
HDD for maximum cooling to protect your valuable data
• Two layer (plastic with aluminum) upper
and lower panels to absorb HDD and fan noise
• Carbon-glass filled frame to reinforce the strength of
the whole enclosure
• Built-in silicone pad to absorb HDD noise
• Included USB cable, eSATA cable, and eSATA bracket
to convert your PC’s internal SATA to eSATA
• Stand included
• Very quiet fan operation – under 22 dBA
• Supports Windows 2000 / XP / ME / VISTA™
MX-1
Media Components
www.antec.com
1-800-22ANTEC (US) / +31 (0) 10 462-2060 (EU)
M
edia Components
Actively Cooled
HDD ENCLOSURE
Cool and Quiet Computing™ features:
• Blower fan keeps your hard drive cool and
improves performance
• Silicone grommets to isolate drive vibrations
• Dual layer top and bottom panels absorb vibration
and deaden fan noise
• Keeps hard drives up to 15ºC cooler, improving the
hard drive’s stability and lifespan
/
