2. BCP
  3. SKY6344
SKY6344

BCP SKY6344 User manual

  • Hello! I am an AI chatbot trained to assist you with the BCP SKY6344 User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
SKY6344 + SKY6345Ver. 1
Farmhouse Kitchen Set
INSTRUCTION
MANUAL
As shoppers, we’re always trying
to find the perfect balance between
quality & value. At BCP, we believe
we’ve achieved that. Our diverse
catalog of everyday essentials is
tailored especially to our customers
& guaranteed to hit that sweet
spot of high quality & low price.
Always.
This item is intended to
be mounted to a wall
following assembly.
Do not attempt to use
this item otherwise as
it may result in
personal injury and
property damage.
bestchoiceproducts.com
4 |
• This product requires adult assembly and supervision when in use.
• This product is intended for indoor use only.
• Do not stand on or use any part of this item as a step ladder.
• Firmly secure all bolts, screws and knobs before use.
• Reconfirm that all bolts, screws, and knobs are secure every 90 days.
• Do not use or store this item in the proximity of open flame or flammable/combustible chemicals.
• If any parts are missing, broken, damaged, or worn, stop using this item until repairs are made and/or
factory replacement parts are installed.
• Do not use this item in a way inconsistent with the manufacturer’s instructions as this could void the
product warranty.
• This product contains small parts. May result in choking hazard for children under 3 years.
• To wipe down item, use a damp cloth. Then, wipe it down once more with a dry cloth.
Please retain these instructions for future reference.
TOOLS REQUIRED
HARDWARE
PHILLIPS
SCREWDRIVER
NOTICE
DOWEL
F
22 PCS
FASTENING
SCREW
D
15 PCS
A
9 PCS
SCREW E
3 PCS
HANGER
SCREW
SCREW
B
28 PCS
SCREW
C
15 PCS
STRUCTURAL
SCREW
G
5 PCS
RANGE
CONNECTOR
H
5 PCST
UP TO 60 MIN.
ASSEMBLY
1 PERSON
ASSEMBLY
3 YEARS
OLD AND UP
3+
HAMMER
(NOT PROVIDED)
DRILL
(OPTIONAL)
DOOR LATCH
FEMALE
J
1 PC
I
1 PC
DOOR LATCH
MALE
| 5
HARDWARE
4
1 PC
CENTER SHELF
PARTS
1 PC
BASE
1
1 PC
CENTER WALL
2
2 PCS
SINK SIDE SUPPORT
6
5
1 PC
RIGHT LEG SUPPORT
1 PC
LEFT WALL
3
1 PC
SINK BACK SUPPORT
7
1 PC
COUNTER PANEL
8
1 PC
OVEN DOOR
9
BRACKET
L
1 PC
ANCHOR
STANDOFF
O
1 PC
UTENSIL
HANGERS
K
3 PCS
WALL
ANCHOR
N
1 PCS
HINGE PEG
M
2 PCS
6 |
PARTS
16
1 PC
BACKSPLASH
1 PC
COUNTERTOP
13
1 PC
LEFT COUNTER
WINDOW
14
1 PC
ROOF FRONT
18
17
1 PC
BACKSPLASH TOP +
ROOF FRAME
1 PC
RIGHT COUNTER
WINDOW
15
2 PCS
ROOF PANEL
19
2 PCS
LEFT LEG
20
1 PC
CENTER LEG
21
10
1 PC
RIGHT BACK LEG
1 PC
OVEN BACK
12
11
1 PC
RIGHT FRONT LEG
| 7
PARTS
2 PCS
FAUCET KNOB
25
22
1 PC
SINK BOTTOM
SUPPORT
1 PC
FAUCET
24
23
1 PC
OVEN HANDLE
2 PCS
BURNER
26
1 PC
SAUCE PAN
27
1 PC
DUTCH OVEN
28
1 SET
UTENSILS
29
PRE-ASSEMBLY
1Insert two part F dowels into the part 1 base.
F
x2
1
8 |
PRE-ASSEMBLY
23Insert two part F dowels into the part 3
left wall.
Insert four part F dowels into the part 2
center wall.
Screw the part J door latch (female) to
the part 2 center wall with two
part D screws.
2
D
x2
J
F
x4
3
F
x2
4Insert four part F dowels into the part 5
right leg support. 5Insert four part F dowels into the part 6
sink side support. Repeat on a second
sink side support.
F
x4
5
F
x4
6
F
x4
6
| 9
PRE-ASSEMBLY
6Insert two part F dowels into the part 7
sink back support. 7Insert two part F dowels into the part 8
counter panel, then attach the part L
bracket with two part D screws.
F
x2 7
F
x2
8
8
L
D
x2
PRODUCT ASSEMBLY
1Attach one part 21 center leg to the part 1 base with one part A screw.
Attach two part 20 left legs to the part 1 base with two part B screws.
1
20
20 21
B
x2
A
10 |
PRODUCT ASSEMBLY
2Attach the part 3 left wall to the part 1 base and part 20 legs with two part B screws, and two
part G screws.
Attach the part 2 center wall to the part 1 base with two part B screws.
Attach the part 4 center shelf to the center wall with two part B screws, set this assembly aside.
4
1
2
3
B
x6
G
x2
323
9
M
x2
I
D
x6
C
x2
Locate the part 9 oven door and
attach the part I door latch (male)
with two part D screws.
Attach two part M hinge pegs to the
top and bottom of the oven door
with four part D screws.
Attach the part 23 handle with two
part C screws.
| 11
PRODUCT ASSEMBLY
4Attach two part 6 sink side supports to the part 7 sink back support and attach this assembly
to the part 2 center wall with one part B screw.
B
2
6
6
7
12 |
PRODUCT ASSEMBLY
5Insert the part 22 sink bottom between the two part 6 sink side supports.
22
6
6
| 13
PRODUCT ASSEMBLY
6Insert the lower hinge peg (see previous step) into the part 1 base.
Attach the part 8 counter panel to the two side supports, then secure to the part 2 & 3 walls
with two part B screws.
7Attach two part 10 & 11 right legs to one part 5 right leg support with two part A screws.
5
10
11
A
x2
B
x2
8
2
3
7
14 |
PRODUCT ASSEMBLY
8Secure the part 10 back leg to the part 7 back sink support with one part B screw, then attach
the right legs to the part 8 counter panel, part 4 center shelf, and part 1 base with five
part A screws.
Insert the part 12 oven back between the part 2 & 3 walls.
9Insert five part H range connectors into the part 13 countertop then secure with five part D
screws.
A
x5
B
4
1
12
3
75
H
x5 D
x5
13
Use a hammer to secure
the range connectors.
| 15
PRODUCT ASSEMBLY
10 Flip the countertop and attach two part 26 burners with eight part C screws, four per burner.
Attach the part 24 and 25 faucet and faucet knobs with three part G screws.
11 Attach the part 14 & 15 left and right counter windows with four part B screws. Set aside.
13
Gx3
Cx8
24 25 x2
26 x2
Bx4
14
15
16 |
PRODUCT ASSEMBLY
12 Attach three part K utensil hangers to the part 16 backsplash with three part E screws.
Insert the backsplash between the part 14 & 15 side windows.
13 Attach the part 17 backsplash top with two part B screws.
16
K
x3
E
x3
17
B
x2
| 17
PRODUCT ASSEMBLY
14 Attach the part 18 roof front with two part B screws.
15 Attach two part 19 roof panels to the part 17 & 18 roof frames with eight part B screws, four
screws per panel.
18
B
x2
Bx8
19
x2
18 |
PRODUCT ASSEMBLY
16 Attach the part 13 countertop to the part 3 left wall and part 5 right leg support with five
part C screws
C
x5
| 19
A
O
N
WALL
WALL MOUNTING
1. Select an appropriate location, then place the product against the wall. Open the part 9 oven door and
mark the wall through the hole in the part 12 oven back. Move the product aside.
2. Drill a hole in the indicated spot on the wall, then insert the part N wall anchor. Insert one part A screw
through the hole in the pat 12 oven back and place the part O stando onto the screw’s end.
3. Return the product to overlap the wall, insert the screw end into the wall anchor, then tighten the part
A screw to secure the product to the wall.
All items can be returned for any reason within 60 days of the receipt and will receive a full refund as long
as the item is returned in its original product packaging and all accessories from its original shipment are
included. All returned items will receive a full refund back to the original payment method. All returned
items will not be charged a re-stocking fee.
All returned items require an RA (Return Authorization) number, which can only be provided by a Best
Choice Products Customer Service Representative when the return request is submitted. Items received
without an RA may not be accepted or may increase your return processing time. Once an item has been
received by Best Choice Products, refunds or replacements will be processed within 5 business days.
All returns must be shipped back to the Best Choice Products Return Center at the customer’s expense. If
the reason for return is a result of an error by Best Choice Products then Best Choice Products will provide
a pre-paid shipping label via email. Boxes for return shipping will not be provided by Best Choice Products,
and is the customer’s responsibility to either use the original shipping boxes or purchase new boxes.
Pictures may be required for some returns to ensure an item is not damaged prior to its return. Items
returned are not considered undamaged until they are received by Best Choice Products and verified as
such. All damages to items are the customer’s responsibility until the item has been received by and
acknowledge by Best Choice Products as undamaged.
PRODUCT WARRANTY INFORMATION
Manufacturer and seller expressly disclaim any and all liability for personal injury, property damage or
loss, whether direct, indirect, or incidental, resulting from the incorrect attachment, improper use,
inadequate maintenance, unapproved modification, or neglect of this product.
HELP CENTER
Product Assembly
Product InquiryChat Support Returns & Refunds
Orders FAQ
WARNING
Question about your product? We're here to help. Visit us at:
help.bestchoiceproducts.com
CHAT
US!
/