1. Press and hold
the demo app
2. Drag to uninstall
the demo app
Uninstall the demo app:
Once uninstalled please factory reset your device.
Go to device settings > search reset > select factory reset > select ok.
BricTECH and Retail mode will be pushed to the device during out of box set up.
Please see install video below.
Install Instructions for Celero 5G
To update your current Celero 5G demo device to display
the Celero 5G 2.0 demo loop, follow these instructions.
https://vimeo.com/791298964/1c353d3793
Need Help? www.mpcHelp.com | Support@mobilepricecard.com
Connect to a network and accept device terms. Follow the “next” & “continue” prompts
Select Skip at the Google Sign in.
To Begin, Factory Reset The Device
Need Help? www.mpcHelp.com | Support@mobilepricecard.com
Continue setup. You will see the EMM screen. Close the App Pinning notification and use the back button to
complete initial setup.
Initial Setup
Need Help? www.mpcHelp.com | Support@mobilepricecard.com
MPC will automatically be installed. Open the MPC app and proceed to setup.
Onboarding MPC
Need Help? www.mpcHelp.com | Support@mobilepricecard.com
Grant All Permissions Follow the prompts Choose “NEXT” when done
Onboarding MPC
Key = 0eje
0 is a number,
not the letter o
Need Help? www.mpcHelp.com | Support@mobilepricecard.com
Onboarding MPC
Accept settings Credentials =
Door Location ID
(7 digit number)
Confirm Device
Correct model should be auto
selected. If not, select desired
device.
Need Help? www.mpcHelp.com | Support@mobilepricecard.com
Onboarding MPC
MPC will load, this may
take some time.
The CELERO 5G
price card will show
Retail mode will launch
Need Help? www.mpcHelp.com | Support@mobilepricecard.com
Removing MPC
Go to settings. To access, enter password, 0eje. Tap on Apps. Select MPC, tap on Deactivate and Uninstall and Accept.
Need Help? www.mpcHelp.com | Support@mobilepricecard.com
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
