HAISEN HD06VCRH 7A User manual

Brand: HAISEN

Model: HD06VCRH 7A

Type: User manual

HAISEN HD06VCRH 7A is a 12VDC daylight sensor with a Zhaga Book 18 receptacle, photocell, and bi-level dimming capabilities. It can be used for indoor and outdoor applications, such as street lights, parking lot lights, and building facade lighting. The sensor can be programmed to turn on and off at specific light levels, and it can also be used to dim the lights based on the ambient light level. Additionally, the sensor has a remote control that allows you to adjust the settings and learn the ambient brightness.

PRODUCT SPECIFICATION

MODEL NO

INPUT

DESCRIPTION

Series Work of Art

HD06VCRH 7A

12VDC

12VDC DAYLIGHT SENSOR

CERTIFICATE IN ACCORDANCE WITH CE ROHS

12VDC DAYLIGHT SENSOR WITH

ZHAGA 18 RECEPTACLE

SHENZHEN HAISEN TECHNOLOGY CO.,LTD

13th Floor, C1 Building, Songshan Lake Intelligent Valley,

Liaobu Town, Dongguan City, 523808, Guangdong.

www.haisensz.com

WRITTEN BY

CHECKED BY (R&D)

CONFIRMED BY (SALES)

DATE

夏勇

2022.11.18

Features & Beneﬁts

Demensions

• Photocell & Daylight Harvesting.

• With Zhaga Book 18 Receptacle.

• Bi-level Dimmable & Daylight Brightness Learning.

• LCD Remote Control.

HD06VCRH 7A

ø30

ø6

15±1mm

12.3

A CB

Receptacle

Module

Tin-plated wire,

diameter 0.75-1.5mm

ø44.2

ø48.2

31.3

28.1

ø44.2

ø48.2

ø38.3

ø30

ø48.2

OPEN

Components

Group 1. Receptacle with the functional module.

Group 2. Receptacle with the cap, no function.

Cap

Ø28

Ø4.52

Ø38.72

Ø16.6

Ø22.2

Ø9.6

Ø30.52

Ø38.72

Ø33.72

12.74

18.04

10.74

8.54

3.33

2.64

ø24.5

7.2

19.4

M20

26.6 2.7 3.2

2.3

A B C76.5

Parameters

Mechanical structure

Top View

Bottom

OPEN

The space for biggest pin,

check it before spirling.

Wiring Diagram

VCC

GND/DIM-

DIM+

NLED+

LED-

4 1 2 3

1. Black/White VCC

2. Pink GND/DIM-

3. Purple DIM+

4. Yellow NC

INPUT

OUTPUT

ENVIRONMENT

CERTIFICATE & STANDARDS

SENSOR PARAMETER

Daylight Harvesting 30Lux/50Lux/80Lux/120Lux/200Lux/250Lux/300Lux/350Lux/400Lux

Photocell 2Lux/10Lux Light will be off when ambient brightness is 10 times of preset lux level

Ambient Brightness Learning Remote control to learn ambient brightness and daylight harvesting

Input Range 10.5-15V DC

Control Standard Partner HD05R, the LCD screen display remote

(purchase seperately)

Warranty 5 Years

Current ≥30mA

Signal DIM 0-10V

Stand-by Power ＜20mA

Connection Zhaga Receptacle

Storage Temp -20°C~+60°C

Environmental Requirements In accordance with CE ROHS

IP Rating IP65

HD06VCRH 7AModel NO.

Detection Angle ≤180°

Sensor head

1Zhaga Receptacle Components

Zhaga Book 18 Receptacle

3Metal Connection Pins(4pcs)

Mounting Port

Optional Components (Not All Necessary)

Installation

Pin to MountBeside the UFO

Daylight Harvesting

Natural Light Brightness

Artiﬁcial Light Brightness

Daylight Harvesting phase

Light ON

Light OFF

When ambient brightness is lower than the preset lux level options(30Lux/50Lux/80Lux/120Lux/ 200Lux/250Lux/300Lux/350Lux-

/400Lux), LED light will be darker when ambient is getting brighter, and brighter when darker; when ambient brightness is brighter

than preset lux level, light off.

When daylight threshold set as 30Lux/50Lux/80Lux/120Lux/200Lux/250Lux/300Lux/350Lux/400Lux,

it performs daylight harvesting function.

Preset Lux Value

Application of Daylight Harvesting

Daylight threshold preset as 30Lux/50Lux/80Lux/120Lux/200Lux/250Lux/300Lux/350Lux/400Lux

When ambient brightness is lower than preset lux level, sensor will turn on light automatically and keep dimming

according to the change of the ambient brightness;

when outside is getting darker, the inside will be brighter, and brighter darker.

Light OFF when ambient brightness

becomes higher

than the preset lux level.

Photocell

Ambient Brightness Learning

Lux*10

The sensor performs photocell function when preset lux level is only 2Lux/10Lux.

1.Light will automatically ON when ambient brightness is lower than perset level. (Scene 1)

2.Light will automatically OFF when ambient brightness is 10 times higher than preset level. (Scene 2)

Instead of giving a speciﬁc lux level, this function enables current ambient brightness to be learnt and set as a standard lux level;

When ambient brightness is getting darker, the artiﬁcial light will be brighter; and brighter darker; When ambient brightness exceeds

the standard level, light will turn off.

Ambient brightness is

10 times higher than preset level

Preset Lux Value

Light ON

Light OFF

Natural light

Scene 1

Scene 2

Ambient Light

Artiﬁcial Light

Light ON 100%

0 Lux

Ariﬁcial

Brightness

Ambient

Brightness

Darker

Brighter

Light OFF

Brighter

Darker

Learnt

Standard

Level

Daylight harvesting of

ambient and artiﬁcial

How To Learn Ambient Brightness

1. Light ON, use HD05R remote;

2. Press “ Scene ” button；

3. Then press MW/PIR button twice till you see the

MW icon and PIR icon on the screen display start

ﬂashing, then the light will keep OFF for about 3S

and turn ON again, that means learning complet-

ed.

Attention

1. The sensor should be installed by qualiﬁed electrician and ensure power is OFF before installation.

2. Please read the instruction carefully before using the product and keep it well for other users to read

any time.

3. We reserve the right to modify any incorrect text, image and technical parameters.

4. Any unauthorized modiﬁcation is forbidden. Otherwise all guarantees will be immediately invalid.

5. Product could be optimized without prior notice.

APPLICATION NOTES

1. Suitable for indoor application, half/completely outdoor environment conditions might be captured as moving signals to trigger the

sensor.

2. Suitable for ceiling mount installation, adjust sensitivity properly if it's installed on side-wall because it gets more sensitive.

3. Adjust sensitivity properly when the sensor is applied in small/narrow/metal-built/with metal spaces.

4. Microwave sensor can't be placed under/inside metal shell; Microwave module must directly face the detection area with edge

lower than light ﬁxture.

5. Keep the sensor away from vibration equipments, air-conditioning outlets, smoke extractors alike conditions to avoid unwanted

trigger.

6. Keep the sensor module away from AC input and DC output to avoid high/low frequency signal interference.

7. At least 2m/6.5ft distance between microwave sensors; 1.5m/4.9ft between the sensor and other wireless devices such as routers

to avoid possible radio interference.

8. Daylight testing delivered in bright day without shadow or specially designed lampshade or lens.

9. Dimming performance differs when connected to different drivers; If the driver can't completely turn OFF, sensor can't either.

10. Input power voltage must be stable with ﬂoat less than 10%.

11. The ﬁrst time powered ON sensor, light will be ON 100% for about 10S then dims to standby level or OFF.

12. Distance detection is delivered by testing person about 165cm in open area as reference, the result differs by size and speed of

moving objects, mountng height and real-life situation.

HAISEN HD06VCRH 7A User manual

HAISEN HD06VCRH 7A User manual

HAISEN HD06VCRH 7A User manual

Related papers

Other documents