Uninstall the entire recirculation kit
from the range hood and disassemble
from the replacement package.
Place the recirculation kit with
the air inlet facing upwards
numberon the symmetrical sides
of the recirculation kit
Attention: Edge “a” should be attached to
ron the
base of the recirculation kit
Clean the recirculation kit and
wipe dry.
The replacement package includes:
.
Replacement steps
Replacement Instructions for
FOTILE Recirculation Kit carbon filters
Step.1
Step.3 Step.4
Step.5
Step.2
Install the replaced recirculation kit
back to the range hood and seal the
connecting point with duct tape.
Lastly, place the two pieces of
ron the other
symmetrical sides of the
recirculation kit.