Page is loading ...
About this item
●MULTI-DEVICE CONTROL - Operate up to 4 different audio and video components such as
TVs Blu-Ray/DVD Players Cable/Satellite Receivers Roku boxes and other Streaming Media
Players Soundbars and More
●BEST REMOTE CODE LIBRARY – This universal remote comes pre-programmed for
Samsung TVs and Roku boxes and works with all major brands and supports thousands of
the latest audio and video equipment Does not work with Roku streaming stick fire TV stick or
other RF streaming devices
●SIMPLE SETUP – This remote includes an easy to follow online setup video providing
trouble-free setup auto scan technology and a master volume control allowing you to control
the volume no matter what device is selected
Note: Products with electrical plugs are designed for use in the US. Outlets and voltage differ
internationally and this product may require an adapter or converter for use in your destination.
Please check compatibility before purchasing.
INTRODUCTION
Setup
Your universal remote requires two (2) AAA batteries (not included). Alkaline batteries are
recommended.
Battery Installation
1. On the back of the remote, pull down on the textured surface and slide battery cover downward
to remove.
2. Match the (+) and (-) marks on the batteries to the (+) and (-) marks inside the battery
compartment, then insert two (2) AAA batteries. Be sure to use fresh batteries.
3. Position battery cover slightly below opening and push upward to lock into place.
Battery Precautions
● Do not mix old and new batteries.
● Do not mix alkaline, standard (carbon-zinc), or rechargeable (Ni-Cd, Ni-MH, etc.) batteries.
● Always remove old, weak or worn-out batteries promptly and recycle or dispose of them in
accordance with local and national regulations.
INTRODUCTION
Battery Saver
Your remote automatically turns off if the
buttons are depressed more than 8 seconds.
This will save your batteries should your
remote get stuck in a place where the buttons
remain depressed (e.g., between the sofa
cushions).
Code Saver
You have up to 10 minutes to change the
batteries in your remote without losing the
codes you have programmed.
Button Functions
1. Power - turns devices ON/OFF
2. Input - Selects video inputs
3. TV, cbl, dvd, aux - Selects the device to control
4. Record, play, stop, rewind, fast forward, pause
5. DVD/Blu-ray™ open/close - open/close a player, or List
features on cable/satellite receivers
6. Setup - Used to program the remote
7. ABCD - Access additional features for DVRs, cable and
satellite receivers
8. Home/Guide - Easily access features on today's
streaming devices, or Guide on cable/satellite receivers
9. Menu - Displays the on-screen menu
10. Up/Down/Left/Right menu navigation
11. Ok - Selects menu items for the controlled device
Button Functions
12. Exit - Exit on-screen menus
13. Info - Displays on-screen show/content information
14. Volume Up/Down
15. Mute - Mutes sound
16. Channel Up/Down
17. Previous Channel - Returns to the previously selected channel
18. Numbers - Enter numbers for direct channel selection
19. Dot (•) - Used to select digital channels, e.g., 4.1
20. Enter - Some devices require enter to be pressed after channel
selection
PRODUCT DIMENSION
The dimensions of the GE 33709 Universal Remote are approximately 7.4 x 2.2 x 0.8 inches (18.8
x 5.6 x 2 cm) and it weighs approximately 3.2 ounces (90.7 grams). However, it's important to note
that these dimensions and weight may vary slightly depending on the specific model or version of
the remote.
●will it work with the amazon fire stick?
It won't work with the fire stick because the fire stick is not controlled by infra red (IR). I have found, though, that
it will work with the Fire TV Cube, though not as elegantly as with the fire TV remote.
●Does this work for RCA tv?
Do you all have the code for a rca tv? From like 2012 model.
Manuals.plus
●How do I enter my GE universal remote code?
Hold the “Setup” button for few seconds until the indicator light turns “RED”. Press the coordinating device
button, such as “TV,” “DVD,” or “AUX.” Enter the ge universal remote codes ( It can be either 3-digits or
4-digits). If the code entered is correct, then the red indicator light will turn “OFF”.
●What is my remote access code?
What is a remote access code? It is a code or a password that a user enters to gain access to a private network
or server. It is a form of authentication that either permits or blocks an access attempt from entering a corporate
system. A remote access code is important for businesses that use remote access technology.
●What is access code?
a code, as of numbers or letters, that is entered into a computer, telephone, or telecommunications network
so as to access a particular service.
Manuals.plus
●How do I find my TV remote code?
Press the TV button. Press the power button every five seconds until your TV turns off. When your TV turns
off, the remote should have found the right code. Test the other buttons (volume, channel, etc) to see if the
remote is paired to your TV.
/
