2. Computers & electronics
  3. Telecom & navigation
  4. Mobile phones
  5. Car kits
  6. Dynasty
  7. DY-BTX Series

Dynasty DY-BTX Series Installation guide

  • Hello! I've reviewed the Dynasty Fireplace Removal and Installation Guide. This document provides instructions for adjusting the temperature probe and reinstalling the back panel. I'm ready to answer any questions you have about the fireplace or the installation process.
  • How to remove the back panel?
    Where is the temperature probe located?
    How to loosen the temperature probe?
    Where to insert the probe after loosening?
REMOVAL AND
INSTALLATION GUIDE
D Y N A S T Y F I R E P L A C E
10. Temperature
Probe Adjustment
10 - 1. Remove the back panel of
the fireplace by removing
the screws surrounding the
backplate.
10. Temperature
Probe Adjustment
10 - 2. From the back, the temperature
probe is located on the bottom
right of the fireplace (red arrow).
Cut the ties (yellow arrows) to
loosen the temperature probe.
10 - 3 . Guide the temperature probe
through the right side of the
fireplace, and insert the
probe into the intake slot on
the top right of the fireplace.
The back panel of the a
fireplace can e re-installed
afterward.
10. Temperature
Probe Adjustment
THANK
YOU!!
W W W . D Y N A S T Y F I R E P L A C E S . C O M
V I S I T U S O N O U R W E B S I T E :
/