Satechi USB4 Installation guide

Insert microSD or SD cards into the card reader

slots.

Support SD/SDHC/SDXC, SD3.0 UHS-1, up to

104MB/S, Capacity up to 2TB (Synchronous use)

Connect an RJ45 network cable to the adapter’s

Gigabit Ethernet port.

Use USB-A data ports to connect USB devices –

2 x USB 3.2 data up to 10 Gbps each and 1 x USB 2.0.

Does not support charging or CD readers, including

Apple SuperDrive

Use the USB-C PD port to charge your device up to

100W.

~15W is used for the adapter’s operation

USB-C charging port does not support video or

data

Use the HDMI port to output 4K HDMI to an external

monitor or display – up to 60Hz.

Computer, cable and monitor need to support 8K

macOS supports up to 4k at 60Hz

Connect the adapter to a USB-C port on your

device.

USB4 MULTIPORT ADAPTER

INSTRUCTIONAL GUIDE