Rain Harvesting TAFV03 Installation guide

Brand
Rain Harvesting
Model
TAFV03
Type
Installation guide

Rain Harvesting TAFV03 is a non-vented flap valve designed to keep mosquitoes, frogs, and other pests out of pipes while allowing water to flow out freely. It is ideal for overflow pipes or any charged line to prevent pests from entering the system. Made from durable plastic, it can be attached directly to a tank overflow outlet or pipe, or to a non-plumbed tank inlet pipe using silicone or solvent weld glue. The valve is self-closing and largely self-cleaning, requiring minimal maintenance.

Rain Harvesting TAFV03 is a non-vented flap valve designed to keep mosquitoes, frogs, and other pests out of pipes while allowing water to flow out freely. It is ideal for overflow pipes or any charged line to prevent pests from entering the system. Made from durable plastic, it can be attached directly to a tank overflow outlet or pipe, or to a non-plumbed tank inlet pipe using silicone or solvent weld glue. The valve is self-closing and largely self-cleaning, requiring minimal maintenance.

Code
Size
Country
TAFV03
100mm
Australia
Flap Valve
Non-Vented
Installation and Specification Guide
PRODUCT DETAILS
Keep mosquitoes, frogs and other pests out of your
pipework while allowing water to flow out unimpeded
with this plastic flap valve.
It is the ideal fitting to install at the end of overflow
pipes or any charged line to ensure pests can't enter
back into the system.
rainharvesting.com
Installation
WHAT’S IN THE BOX? TOOLS/MATERIALS YOU MAY REQUIRE
Flap Valve Non-Vented Silicone (optional)
Solvent weld glue (optional)
FOR A TANK OVERFLOW OUTLET OR TANK OVERFLOW OUTLET PIPE
1 - Select an installation point for your Flap Valve. It can be attached directly to your tank overflow outlet,
or to your horizontal tank overflow outlet pipe.
2 - Orient your Flap Valve so the hinge is at the top, then secure directly to your chosen installation point
with silicone or solvent weld glue.
rainharvesting.com
FOR A NON-PLUMBED TANK INLET PIPE
1 - Orient your Flap Valve so the hinge is at the top, then secure directly to your non-plumbed tank inlet
pipe with silicone or solvent weld glue.
Flap Valve Non-Vented
Country
Code
A
B
C
D
Australia
TAFV03
100 F
134
141
117
Product Specifications
Dimensions & Pipe Fittings
All dimensions are in mm unless otherwise stated.
rainharvesting.com
C
D B
A
Fitting guide:
F = Female / Socket Fitting
M = Male / Spigot Fitting (Pipe size)
IP = In-Pipe Fitting
DISCLAIMER You acknowledge and agree that the information, data, advice, opinion, plan or other thing (Material) provided to you by Rain Harvesting Pty Ltd (ABN 11 113 300 093) (we,
us, our) is provided “as is” without any representation, warranty, indemnity or guarantee as to the performance, accuracy, timeliness, completeness, merchantability or fitness of the
Material for any particular purpose or application. The Material may contain errors, mistakes, inaccuracies and may not be complete. We expressly exclude any liability for such
performance, accuracy, timeliness, completeness, merchantability or fitness of the Material for any particular purpose or application, to the maximum extent permissible by law.
Unless we expressly specify otherwise, we disclaim all responsibility and liability for any third party provided advice or provision of services, or failure to advise or provide services. The
disclaimers above are subject to the rights, warranties, guarantees and remedies relating to the provision of services that you have under, and that cannot be excluded, restricted or
modified under, the Australian Consumer Law.
For more information, please see our Services Purchase Terms at www.bluemountainco.com.au
rainharvesting.com
A common misconception about collecting rainwater is that all you need is a
roof, a tank and some rain. This ‘tanking’ approach cannot always be relied on to
deliver the volume – or quality – of water that you require. That is where we can
help.
With some thought, your rain harvesting system can provide you with cleaner
water and lots of it. Whether you’re completely reliant on tank water or wanting
to keep the garden green, our simple steps will help you achieve your goal.
The Rain Harvesting approach to rainwater collection involves using tested and
proven products to make quality rainwater available for use in and around your
property. You don’t need much to get started and you will be surprised how
easy it is to get the most out of your rainwater system.
How can we help you?
Your Flap Valve is self-closing and largely self-cleaning, so it requires little to no maintenance. If
maintenance is required, simply hose or brush off the flap or mosquito-proof stainless steel vented screen.
COMPLIANCE
AS/NZS 4020:2005 – Testing of products for use in contact with drinking water
Maintenance
For more information or to find out
how we can help, just give us a call on
+61 7 3248 9600
Or visit our website at
rainharvesting.com
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5

Rain Harvesting TAFV03 Installation guide

Brand
Rain Harvesting
Model
TAFV03
Type
Installation guide

Rain Harvesting TAFV03 is a non-vented flap valve designed to keep mosquitoes, frogs, and other pests out of pipes while allowing water to flow out freely. It is ideal for overflow pipes or any charged line to prevent pests from entering the system. Made from durable plastic, it can be attached directly to a tank overflow outlet or pipe, or to a non-plumbed tank inlet pipe using silicone or solvent weld glue. The valve is self-closing and largely self-cleaning, requiring minimal maintenance.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents