2. universal douglas
  3. LRL14-30L840-750C
LRL14-30L840-750C

universal douglas LRL14-30L840-750C Operating instructions

  • I've reviewed the provided datasheet for the Universal Douglas LED lensed modules, specifically the LRL14-30L8xx-750C series. This document details the performance, dimensions, and installation guidelines for these modules, highlighting features such as their long lifespan, high efficacy, and multiple color temperature options. I'm ready to answer any specific questions you have about these LED modules.
  • What is the minimum ambient operating temperature for this LED module?
    What is the maximum current rating of this LED module?
    What is the lead length of this module?
    What is the color consistency of this product at 4000K?
LRL14‐30L8xx‐750C
www.universaldouglas.com
April, 11 2022 Universal Lighting Technologies
Description: 4’ LED Lensed Module
➢Simple and easy installation
➢Long life with high efficacy
➢Diffuser lens provides broad, even light distribution
➢Integrated heat sink for cool operation
➢Class 2 rating simplifies wiring
Lumen
Performance:
Catalog Number Nominal CRI
Current
(Amps) Initial
Lumens (1) Vf (2)
(Volts)
Power
(Watts) Lm/W
LRL14-30L840-750C 0.525 2,435 35 18 133 >82
0.700 3,150 36 25 125
1.050 4,500 38 40 113
General Performance Specifications
•Lumen Maintenance : L85 > 60Khrs (reported)
L70 > 140Khrs (calculated)
@I= 1050mA, tamb=40°C
•Color Consistency: <3 SDCM (3500K, 4000K)
<4 SDCM (5000K)
Application:
•Min. Ambient Operating Temp.:
•Max. Ambient Operating Temp.:
‐22°F, ‐30°C
140°F60°C
•Maximum Current rating of 1.05 Amps
Regulatory
•UL8750
•CSA250.13‐14
•RoHS Compliant
Notes:
•Performance data taken at Tamb = 25°C
•Power consumption and photometric performance are
typical values
•Lumen maintenance value is based on LM80 testing and
TM‐21 calculation projections.
Mechanical Dimensions
42.46”
0.8”
1.24”
1.4lbs
•Length:
•Width
•Height:
•Weight:
•Lead Length:
Red & Blue 24”
(1) MID Flux Bin Values are shown for CCT of 4000K. Tolerance of ±6.5% at 25°C
(2) Vf is at Tc of 25°C with max tolerance of +/‐ 5%.
Ordering Information
Part Number CCT
Lumen Multiplier
LRL14‐30L835‐750C10C 3500K 96.7%
LRL14‐30L840‐750C10C 4000K 100.0%
LRL14‐30L850‐750C10C 5000K 104.1%
Carton Quantity: 10
Application and operation performance specification information subject to change without notification.
Page 1 of 3
LRL14‐30L8xx‐750C
www.universaldouglas.com
April, 11 2022 Universal Lighting Technologies
Installation & Assembly Guidelines
•This module is to be mounted using mounting slots and
fasteners. The aluminum frame should be grounded or
mounted to a grounded metal surface.
•Modules may be connected in parallel to split current
from the LED driver.
1.24
1.55
Side profile with
end cap removed
Photometric Distribution LED Color Consistency Spectral Power Distribution
4000K
Dimensions
24” 20AWG
Stranded
Copper Leads
90
95
100
105
85
25 30 35 40 45 50 55 60 65 70 75
Tc (°C)
Relative Lumens (%)
Relative Lumens vs. Temperature
Application and operation performance specification information subject to change without notification.
Page 2 of 3
LRL14‐30L8xx‐750C
www.universaldouglas.com
April, 11 2022 Universal Lighting Technologies
Conditions of Acceptability –
1.The LED modules are intended for connection to a Class 2, constant current source of supply.
The connection of the LED arrays to a source of supply other than class 2, the suitability must be
determined in the end use product investigation.
2.The LED modules shall be installed in compliance with the mounting, spacing, casualty, and
the segregation requirements applicable to the ultimate application.
3. The LED modules were subjected to the Normal Temperature Test in a 40°C Ambient.
Application and operation performance specification information subject to change without notification.
Page 3 of 3
4.The LED Array modules are suitable for “DRY” locations. The use in other than dry locations
shall be evaluated to the end use application.
5.The array modules may be marked with any voltage and current rating that do not exceed the
maximum ratings specifies in the ELECTRICAL RATINGS.
6. Suitability of input connections to the LED module to be determined in
the end use product.
Application Notes:
1. The standard base model version of this module without Conformal Coating is designed for
indoor fixtures in dry applications. Damage caused by corrosion due to moisture, condensation
and other harmful elements, is not covered by the warranty.
Model
Maximum Input
Current
Location
Center of the PCB
Measured
°
C
Limit
°C
*
LRL14-30Lyzz-aaaC 1200 mA
Between
48th and
49
th LED
68.7 105
Center –Bottom
Heat Sink 63.7 --
/