Dakota Digital 2000 User manual

Brand: Dakota Digital

Model: 2000

Category: Motorcycle Accessories

Type: User manual

This manual is also suitable for

DAKOTA DIGITAL

BIKER’S CHOICE

NEW PART NUMBERS ARE RED

INSTRUMENT & LIGHTING

525

APPAREL &

ACCESSORIES

HEADGEAR

BIKE

ACCESSORIES

SEATS &

SADDLEBAGS

FOOT

CONTROLS

FRAMES &

FENDERS

CUSTOM PAINT

SUSPENSION

BRAKES

WHEELS &

TIRES

EXHAUST

CARBS/

FUEL SYSTEMS

CABLES

CONTROL &

HANDLEBARS

OIL TANKS

& FILTERS

INSTRUMENT

& LIGHTING

IGNITION &

ELECTRICAL

ENGINE

VALVE TRAIN

PRIMARY

DRIVE

TRANSMISSION

FINAL DRIVE

GASKETS &

HARDWARE

CHEMICAL

TOOLS &

SUPPLIES

DISPLAY &

PROMO

CROSS

REFERENCE

21-1001

21-1002

2000 SERIES DIGITAL GAUGE

5” DIGITAL TANK MOUNT SPEEDO

• Installs into stock instrument cluster and uses standard speedo cable or reads stock

H-D electronic sensor

• Speedo reading to 255 mph

• Bar graph tachometer

•Resettable trip odometer

•Turn signals and high beam indicator

• Low voltage and oil warning indicators

• Neutral indicator

•1 button speedometer calibration

• Road Kings may require harness modifications

•Will not fit EFI 00-01 Softail or Road King

21-1000 Fat Bob Style Tanks (Mfg/N HLY-2000) $445.00

P/N Application Retail

Pick-Up Adapter for 2000 Series

• Speed adapter is required

21-1001 96-04 H-D Models (Mfg/N SEN-2012) $19.95

Sender Unit for 2000 Series

• 5/8” - 18

21-1002 For Front Wheel Speedo Drives (Mfg/N SEN-2011) $34.95

Road King Harness

21-1025 Carbureted Models $19.95

DAKOTA DIGITAL

• Each unit is completely individual, no control box

• Exclusive warning feature allows reading to flash when outside normal operating limits

• Start up circuitry provides fast accurate readings and no waiting for readings to stabilize

•All units feature high contrast, non-glare teal displays for excellent daytime visibility

and have nighttime dimming capability

• 2-year manufacturer’s warranty

2000 SERIES

6000 SERIES

21-1044

49-8608

49-8609

49-8627

6000 SERIES DIGITAL SPEEDOMETER/TACHOMETER

• Measures 4-1/2” long, 1-5/8” tall and 1-1/2” deep

• 30% smaller than the 5000 series speedo/tach

•Uses new high brightness vacuum fluorescent graphic display technology

• Contains all indicators including turn signal, high beam, neutral, low oil

pressure and engine for fuel injected models

• Odometer, tripmeter and user selectable bar/graph tachometer range of

0-5000, 0-8000 and 0-16,000 rpms also included

•Menu driven setup allows easy configuration and calibration

• Mfg/N HLY-6000

21-1044 $645.00

MOUNTING BRACKETS FOR 6000 SERIES GAUGE

P/N Description Retail

49-8608 1-1/2” Bar Mount Bracket (Mfg/N BKT-5005) $80.00

49-8609 1” Riser Mount Bracket (Mfg/N BKT-5006) 89.00

49-8610 1-1/4” Riser Mount Bracket (Mfg/N BKT-5007) 94.00

49-8611 1-1/2” Riser Mount Bracket (Mfg/N BKT-5008) 99.00

49-8619 Sportster Mount (Mfg/N BKT-6010) 99.00

49-8624 Deuce Mount (Mfg/N BKT-5011) 89.00

49-8627 Steel Housing (Mfg/N BKT-6012) 99.00

21-1000

INSTRUCTIONS

DAKOTA DIGITAL

BIKER’S CHOICE

NEW PART NUMBERS ARE RED

INSTRUMENT & LIGHTING

526

APPAREL &

ACCESSORIES

HEADGEAR

BIKE

ACCESSORIES

SEATS &

SADDLEBAGS

FOOT

CONTROLS

FRAMES &

FENDERS

CUSTOM PAINT

SUSPENSION

BRAKES

WHEELS &

TIRES

EXHAUST

CARBS/

FUEL SYSTEMS

CABLES

CONTROL &

HANDLEBARS

OIL TANKS

& FILTERS

INSTRUMENT

& LIGHTING

IGNITION &

ELECTRICAL

ENGINE

VALVE TRAIN

PRIMARY

DRIVE

TRANSMISSION

FINAL DRIVE

GASKETS &

HARDWARE

CHEMICAL

TOOLS &

SUPPLIES

DISPLAY &

PROMO

CROSS

REFERENCE

5000 SERIES DIGITAL GAUGES

SPEEDOMETER AND TACHOMETER

•High contrast teal display for easy daytime viewing

• Chrome housing

• Handlebar, triple tree or riser mounting available (purchased separately)

• Speedo reading to 255 mph

• Bar graph tachometer

•Resettable trip odometer

• Bar mount brackets sold separately

P/N Application Retail

Speedometer/Tachometer

• Contains speedometer, bar graph tachometer, odometer and resettable trip odometer

•1 button speedometer calibration

• Installs into stock instrument cluster and uses standard speedo cable or reads stock

H-D electronic sensor

•Turn signals and high beam indicator

• Low oil warning indicators

• Neutral indicator

• Mfg/N HLY-5000X

21-1010

Custom Applications

$445.00

Bar Mount Digital Speedometer

•Available for electronic and cable drive applications (purchased separately)

• Measures 4-1/8” x 2” x 3/4” deep

• Mfg/N

HLY-5011

21-1017 Custom Applications $299.00

Bar Mount Digital Tachometer

• Quick response

•

0-18,000 RPM range with high RPM recall

•1 to 15 cylinder selection

•Works with single or dual fire ignitions

• Measures 4-1/8” x 2” x 3/4” deep

• Mfg/N HLY-5021

21-1018 Custom Applications $299.00

Pick-Up Adapter

• Speed adapter is required

•Mfg/N SEN-5012

21-1011 96-04 H-D Models $19.95

P/N Application Retail

Sender Unit

• Mfg/N SEN-5011

21-1012 For Front Wheel Speedo Drives $34.95

Steel Housing for 5000X Series

49-8625 (Mfg/N BKT-5012) $99.00

Steel Housing for Sender Unit

49-8626 (Mfg/N BKT-5013) $89.00

MOUNTING BRACKETS

FOR 5000X SERIES GAUGES

P/N Description Retail

21-1013 1” Bar Mount Bracket (Shown Above) 74-04 XL, Big Twin, $75.00

Custom Applications (Mfg/N BKT-5001)

21-1019 1-1/4” Bar Mount Bracket 74-04 XL, Big Twin, 80.00

Custom Applications (Mfg/N BKT-5004)

49-8608 1-1/2” Bar Mount Bracket (Mfg/N BKT-5005) 80.00

21-1014 Flat Triple-Tree Handlebar Clamp Mount 74-04 XL, Big Twin, 90.00

Custom Applications (Mfg/N BKT-5002)

21-1015 35˚ Triple-Tree Handlebar Clamp Mount 74-04 XL, Big Twin, 89.00

Custom Applications (Mfg/N BKT-5003)

49-8609 1” Riser Mount Bracket (Mfg/N BKT-5006) 89.00

49-8610 1-1/4” Riser Mount Bracket (Mfg/N BKT-5007) 94.00

49-8611 1-1/2” Riser Mount Bracket (Mfg/N BKT-5008) 99.00

49-8623 Sportster Mount (Mfg/N BKT-5010) 65.00

49-8624 Deuce Bracket (Mfg/N BKT-5011) 89.00

21-10131” Bar Mount Bracket Shown

5000 SERIES

21-1017Speedometer 21-1018Tachometer 21-1010Speedo/Tach

49-8623

49-8625

49-8626

49-8608

49-8609

INSTRUCTIONS

DAKOTA DIGITAL

BIKER’S CHOICE

NEW PART NUMBERS ARE RED

INSTRUMENT & LIGHTING

527

APPAREL &

ACCESSORIES

HEADGEAR

BIKE

ACCESSORIES

SEATS &

SADDLEBAGS

FOOT

CONTROLS

FRAMES &

FENDERS

CUSTOM PAINT

SUSPENSION

BRAKES

WHEELS &

TIRES

EXHAUST

CARBS/

FUEL SYSTEMS

CABLES

CONTROL &

HANDLEBARS

OIL TANKS

& FILTERS

INSTRUMENT

& LIGHTING

IGNITION &

ELECTRICAL

ENGINE

VALVE TRAIN

PRIMARY

DRIVE

TRANSMISSION

FINAL DRIVE

GASKETS &

HARDWARE

CHEMICAL

TOOLS &

SUPPLIES

DISPLAY &

PROMO

CROSS

REFERENCE

DIGITAL TACHOMETER

• Quick response

• 0-18,000 RPM, (10 RPM resolution up to 9990

and 100 RPM resolution above 10,000 RPM)

• High RPM recall

•

Shift indicator, set point and hour meter

•1 to 15 cylinder selection

•Works with single or dual fire ignitions

• Mfg/N HLY-3021

21-1021 $249.95

DIGITAL MINI

SPEEDOMETER/TACHOMETER

• 2-1/16” diameter housing and only 1” deep

•Adjustable speedometer and tachometer

•Blackout effect when off

•

Uses new high brightness vacuum fluorescent graphic

display technology

• Contains all indicators including turn signal, high

beam, neutral, low oil pressure and engine for fuel

injected models

• Selectable screens allow the rider to display

speedometer only, speedometer with odometer and

tripmeter or speedometer with bar/graph tachometer

•Menu driven setup allows easy configuration and

calibration to any bike

• Mfg/N HLY-3015

21-1038 $425.00

3000 SERIES DIGITAL 2-1/16” ROUND GAUGES

• Chrome bezel and machined aluminum housing

• Fits 2-1/16” opening

• Handlebar or triple tree mounting available (purchased separately)

ROUND MINI DIGITAL TACHOMETER

• Quick response

• 0-18,000 RPM, (10 RPM resolution up to 9990 and

100 RPM resolution above 10,000 RPM)

•1 to 15 cylinder selection

•Works with single or dual fire ignitions

• Mfg/N HLY-3027

21-1023 $249.95

ROUND MINI

DIGITAL SPEEDOMETER

• Speedo reading to 255 mph

•Available for electronic and cable drive applications

(purchased separately)

• Odometer with resettable trip odometer

P/N Description Retail

21-1022 Digital Speedometer $249.95

(Mfg/N HLY-3013)

Pick-Up Adapter - Required

21-1004 96-04 H-D Models $19.95

(Mfg/N SEN-1012)

Sender Unit

21-1005 For Front Wheel Drive $30.95

Speedo Drives (Mfg/N SEN-1011)

ROUND MINI

DIGITAL OIL PRESSURE GAUGE

• Range 0-150 psi

• Resolution 1 psi

• Sending Unit required

P/N Description Retail

21-1024 Oil Pressure Gauge $139.95

(Mfg/N HLY-3032)

21-1009 Sending Unit 39.95

(Mfg/N SEN-1031)

Speedo

Calibrator

ON PAGE

534

DIGITAL SPEEDOMETER

• Speed reading to 255 mph

• Service meter

• High speed recall

•

Includes turn signal and high beam indicators

•Available for electronic and cable drive applications

(purchased separately)

• Odometer with resettable trip odometer

P/N Description Retail

21-1020 Digital Speedometer $249.95

(Mfg/N HLY-3011)

Pick-Up Adapter

• Required

21-1004 96-04 H-D Models $19.95

(Mfg/N SEN-1012)

Sender Unit

21-1005 For Front Wheel Drive $30.95

Speedo Drives (Mfg/N SEN-1011)

3000 SERIES DIGITAL 3-3/8” ROUND GAUGES

• Chrome bezel and machined aluminum housing

• Fits factory 3-3/8” opening

• Handlebar or triple tree mounting available (purchased separately)

DIGITAL VOLTMETER

• Range: 8-17.0 Volts

• Resolution: 0.1 Volt

• Mfg/N HLY-3051

21-1039 $139.95

DIGITAL CLOCK

WITH TIME, DATE & TEMPERATURE

•Digital clock with air temperature

• 2-1/16” diameter

• Fits directly into the stock ambient air temp location

on most Dressers

• Features an ambient air temperature readout and

can also display the day of the week and date

• Mfg/N HLY-3161

21-1036 $199.75

Mounting

Brackets

ON PAGE

531

DIGITAL COMPASS

WITH TIME & TEMPERATURE

• Displays compass reading along with time of day

and ambient air temperature

49-8617 $349.95

INSTRUCTIONS

DAKOTA DIGITAL

BIKER’S CHOICE

NEW PART NUMBERS ARE RED

INSTRUMENT & LIGHTING

528

APPAREL &

ACCESSORIES

HEADGEAR

BIKE

ACCESSORIES

SEATS &

SADDLEBAGS

FOOT

CONTROLS

FRAMES &

FENDERS

CUSTOM PAINT

SUSPENSION

BRAKES

WHEELS &

TIRES

EXHAUST

CARBS/

FUEL SYSTEMS

CABLES

CONTROL &

HANDLEBARS

OIL TANKS

& FILTERS

INSTRUMENT

& LIGHTING

IGNITION &

ELECTRICAL

ENGINE

VALVE TRAIN

PRIMARY

DRIVE

TRANSMISSION

FINAL DRIVE

GASKETS &

HARDWARE

CHEMICAL

TOOLS &

SUPPLIES

DISPLAY &

PROMO

CROSS

REFERENCE

ELECTRONIC

SPEEDO ADJUST MODULE

• Corrects speedometer readings when a tire or pulley

change has been made on stock H-D systems

• Plug into stock wiring harness between transmission

sensor and speedo

• No cutting or splicing required

• Adjustment is made with 2 sealed push button switches

to increase or decrease while bike is being driven

• Correction to within 1 mph or 1 kph

• Mfg/N SGI-6

Note: Speedo adjust module is not required

with Dakota Digital speedometers.

21-1016 96-04 H-D Models $109.95

TRANSMISSION SPEED SENSOR

• Mounts into the stock sensor port

•Inductively reading an internal gear, the sensor

provides a pulse signal to the speedometer which

calculates and displays the speed

•Fits 96-04 H-D Models and after-market

Big Twin transmissions

P/N Application Retail

21-1026 For

1000 & 3000 Series

$79.95

(Mfg/N SEN-5017)

21-1027 For 5000 Series 77.91

(Mfg/N SEN-1017)

49-8614 For 6000 Series and 79.95

#21-1038 (Mfg/N SEN-6017)

Extension

49-8613 Extension for 96-04 electronic $19.95

Transmission Senders (Mfg/N SEN-6018)

DIGITAL MINI TACHOMETER

• Range: 0-8000 RPM

• Resolution: 100 RPM

• Numeric Display:

2-1/2”L x 1-5/8”W x 1-5/8”D

• Mfg/N

HLY-1027

21-1006 $169.95

1000 SERIES

CHROME-PLATED

MOUNTING CUP

• Chrome-plated

• Securely houses 3000 series, 2-1/16” gauges

• Mfg/N

CUP-3001

21-1032 $75.00

3000 SERIES

BRACKETS

FOR 2-1/16” GAUGES

•Use with #21-1032 to secure to handlebars

• Mount conceals most hardware

P/N Description Retail

21-1033 1” Bars (Mfg/N BKT-3100) $60.00

21-1034 1-1/4” Bars (Mfg/N BKT-3125) 65.00

21-1035 1-1/2” Bars (Mfg/N BKT-3150) 70.00

OIL TEMPERATURE GAUGE

• Range: user selectable 0-400°F

or 0-200°C

• Resolution: 1°F or 1°C

• Oil temperature sensor required

(BC#21-1041)

• Mfg/N

HLY-3051

21-1040 $139.95

HEAD TEMPERATURE GAUGE

• Range: user selectable 150-750°F

or 65-400°C

• Resolution: 4°F or 3°C

• Head temperature sender required

(BC#21-1043)

• Mfg/N

HLY-3111

21-1042 $169.95

FUEL LEVEL GAUGE

• Range: 0-99%

• Resolution: 1%

•Uses stock Harley-Davidson

sender

• Mfg/N

HLY-3111

21-1037 $139.95

REAR WHEEL SPEED SENSOR

• Mounts on the rear wheel axle spacer on

most Softail and rigid models

•Inductively reading the rear pulley bolts, the sensor

provides a pulse signal to the speedometer which

calculates and displays the speed

P/N Application Retail

21-1028 For

1000 & 3000 Series

$119.95

(Mfg/N SEN-1018)

21-1029 For 5000 Series 119.95

49-8615 For 6000 Series and 79.95

#21-1038 (Mfg/N SEN-6018)

DAKOTA DIGITAL SENSORS

STEEL MOUNTING CUP

•

Machined steel cup for welding into custom applications

• Use when making custom bars or speciality,

integrated mounts

•Accepts 3000 series, 2-1/16” gauges

• Mfg/N

HLY-3003

49-8618 $60.00

21-1026

21-1028

INSTRUCTIONS

DAKOTA DIGITAL SENSORS

BIKER’S CHOICE

NEW PART NUMBERS ARE RED

INSTRUMENT & LIGHTING

529

APPAREL &

ACCESSORIES

HEADGEAR

BIKE

ACCESSORIES

SEATS &

SADDLEBAGS

FOOT

CONTROLS

FRAMES &

FENDERS

CUSTOM PAINT

SUSPENSION

BRAKES

WHEELS &

TIRES

EXHAUST

CARBS/

FUEL SYSTEMS

CABLES

CONTROL &

HANDLEBARS

OIL TANKS

& FILTERS

INSTRUMENT

& LIGHTING

IGNITION &

ELECTRICAL

ENGINE

VALVE TRAIN

PRIMARY

DRIVE

TRANSMISSION

FINAL DRIVE

GASKETS &

HARDWARE

CHEMICAL

TOOLS &

SUPPLIES

DISPLAY &

PROMO

CROSS

REFERENCE

OIL TEMPERATURE SENSOR

• Screws into crankcase or oil reserve tank

(drilling and tapping required) or oil line

using appropriate fittings

• Mfg/N SEN-1043

21-1041 $24.95

INDUCTIVE SPEED SENSOR

•Inductively reads gear teeth, pulley bolts

or any ferrous metal passing by the sensor

• It provides a pulse signal to the speedometer which

calculates and displays the speed

P/N Application Retail

21-1030 For 1000 & 3000 Series $53.24

(Mfg/N SEN-1019)

21-1031 for 5000 Series 59.95

(Mfg/N SEN-5019)

49-8616 For 6000 Series and 59.95

#21-1038 (Mfg/N SEN-6019)

TURN SIGNAL

INTERFACE MODULE

•Allows the 1000, 3000 and 5000 Series speedometers

to work with automatic turn signals cancel modules

•Requiring only 12 volts, ground, speed in

and turn output

• Easy installation and use

• Mfg/N TSI-1

21-1045 $19.95

DAKOTA DIGITAL

ELECTRONIC HIDDEN ANTENNA

• Electronic AM/FM antenna

• Eliminates unsightly mast antenna

• Can be hidden anywhere on bike, plugs directly

into any standard antenna jack

• 3-1/2” x 3/4” in size, comes with 3 ft. of cable

• Requires connection to switched 12 volts

• Sealed from dirt and moisture

• Mfg/N ANT-2000

21-0999 $79.95

HEAD TEMPERATURE SENSOR

• Sensor mount to head or rocker cover bolt

• Mfg/N SEN-3111

21-1043 $14.95

MAXIMUM SPEEDO/TACH MIRRORS

SLIMLINE MIRROR SPEEDO/TACH

• Speedometer

•Trip odometer

• Odometer

•Tachometer

• 100% sunlight visible

•Sold in pairs

21-1109 65-04 H-D Models $732.60

Left

Right

BIG BIKE PARTS

™

DIGITAL VOLT METER

BIG BIKE PARTS

™

DIGITAL 5 FUNCTION VOLT METER

•Voltage monitoring from 11.0V to 16.0V

•Includes thermometer, ice alert, clock, stop watch and lap counter

• Attaches with Velcro

41-7536 $26.95

CABLE DRIVE SPEED SENSOR

• Sender for cable drive applications

• Screws to end of speedometer cable

(5/8” speedo cable threads)

•

Sender is remotely mounted, not directly to speedometer

49-8612 $34.95

INSTRUCTIONS

AUTOMETER

™

BIKER’S CHOICE

NEW PART NUMBERS ARE RED

INSTRUMENT & LIGHTING

530

APPAREL &

ACCESSORIES

HEADGEAR

BIKE

ACCESSORIES

SEATS &

SADDLEBAGS

FOOT

CONTROLS

FRAMES &

FENDERS

CUSTOM PAINT

SUSPENSION

BRAKES

WHEELS &

TIRES

EXHAUST

CARBS/

FUEL SYSTEMS

CABLES

CONTROL &

HANDLEBARS

OIL TANKS

& FILTERS

INSTRUMENT

& LIGHTING

IGNITION &

ELECTRICAL

ENGINE

VALVE TRAIN

PRIMARY

DRIVE

TRANSMISSION

FINAL DRIVE

GASKETS &

HARDWARE

CHEMICAL

TOOLS &

SUPPLIES

DISPLAY &

PROMO

CROSS

REFERENCE

AUTOMETER

™

5” TACHOMETER

• 10,000 RPM tach

• Adjustable shift light

• Adjustable electro luminescence dial “glows” at night

• Chrome case & bezel with rain cover

•Works with 1 and 2 pulse ignitions

42-1013 5” Fat Tach with Shift Light $358.95

42-1035

42-103842-1037

42-1040

42-1036

AUTOMETER

™

ELECTRONIC SPEEDOMETERS

• Compatible with H-D and any speed sensor

• Push button recalibration while driving

• LCD resettable odometer

•Available in 120 mph or 160 mph

•3 wire installation

• 5” speedo fits into 4-5/8” dash opening, 3-3/8” fits standard billet instrument mounts

P/N Description Retail

5” Speedometers

42-1035 5” 120 mph Electronic Speedo - Black Dial $330.95

42-1036 5” 120 mph Electronic Speedo - White Dial 330.95

3-3/8” Speedometers

42-1037 3-3/8” 120 mph Electronic Speedo - Black Dial $326.95

42-1038 3-3/8” 120 mph Electronic Speedo - White Dial 326.95

42-1040 3-3/8” 160 mph Electronic Speedo - Black Dial 326.95

42-1001 42-1029

42-103342-1031

42-1003 42-100542-1009

AUTOMETER

™

PRO-CYCLE STREET TACHOMETERS

•Available in 2-5/8” and

3-3/8

” diameters

•Works with 1 & 2 pulse ignitions

•Water-resistant

P/N Description Retail

2-5/8”

42-1003 8k RPM - Black Dial $277.95

Chrome Bezel and Cup

42-1005 8k RPM - White Dial 277.95

Chrome Bezel and Cup

42-1009 8k RPM - White Dial 237.95

Black Bezel and Cup

P/N Description Retail

3-3/8”

• Chrome bezel and cup

42-1001 8k RPM - Black Dial $299.95

42-1029 8k RPM - White Dial 299.95

42-1031 10k RPM - Black Dial 320.95

42-1033 10k RPM - Silver Dial 297.95

AUTOMETER

™

PRO-CYCLE

HIGH RPM TACHOMETERS

•Black dial, aluminum bezel and water resistant

• Includes mounting bracket and 2-coil tach adapter

• Memory recall models memorize engine performance by recording tachometer

readings and engine sound

• Shift light model allows you to dial in your desired shift RPM; an amber light indicates

when you reach desired RPM’s

•Works with 1 and 2 pulse ignitions

P/N Description Retail

42-1006 5” Diameter 10,000 RPM $305.95

42-1000 5” Diameter 10,000 RPM with Memory Recall 374.95

42-1008 5” Diameter 10,000 RPM with Shift Light 329.95

42-1004 3-3/8” Diameter 8,000 RPM 270.95

42-1011 3-3/8” Diameter 8,000 RPM with Memory Recall 364.95

42-1010 3-3/8” Diameter 14,000 RPM 254.95

42-1012 3-3/8” Diameter 14,000 RPM with Memory Recall 373.95

INSTRUCTIONS

PRO-SHIFT LITE & GAUGE MOUNTS

BIKER’S CHOICE

NEW PART NUMBERS ARE RED

INSTRUMENT & LIGHTING

531

APPAREL &

ACCESSORIES

HEADGEAR

BIKE

ACCESSORIES

SEATS &

SADDLEBAGS

FOOT

CONTROLS

FRAMES &

FENDERS

CUSTOM PAINT

SUSPENSION

BRAKES

WHEELS &

TIRES

EXHAUST

CARBS/

FUEL SYSTEMS

CABLES

CONTROL &

HANDLEBARS

OIL TANKS

& FILTERS

INSTRUMENT

& LIGHTING

IGNITION &

ELECTRICAL

ENGINE

VALVE TRAIN

PRIMARY

DRIVE

TRANSMISSION

FINAL DRIVE

GASKETS &

HARDWARE

CHEMICAL

TOOLS &

SUPPLIES

DISPLAY &

PROMO

CROSS

REFERENCE

Pull Back Riser

Springer Risers

1” T-Bars

1-1/2” T-Bar

Dual Mount

1” T-Bars

Dual Mount

PRO-SHIFT LITE

• Independently operating shift light with advanced microcircuitry

• Pill module kit includes 5 calibrated “pills” in 200 RPM increments, beginning

with the first number listed

• Shift point is determined by inserting a precision-calibrated RPM “pill” module

into the unit

•An amber light is illuminated when engine RPM reaches the predetermined point

P/N Description Retail

42-1014 For Points & Electronic Ignition $140.95

“Pill” Module Kit

42-1016 5,000 to 5,800 RPM $41.95

42-1018 6,000 to 6,800 RPM 41.95

42-1020 7,000 to 7,800 RPM 41.95

42-1022 10,000 to 10,800 RPM 41.95

42-1028 13,000 to 13,800 RPM 36.40

CYCLE PERFORMANCE GAUGE MOUNTS

• Designed for AutoMeter

™

gauges and speedometers

• Houses 3-3/8” and 5” tachometers and speedometers

• CNC precision machined from billet aluminum for durability

• Polished to a beautiful mirror finish

• Custom applications for several aftermarket handlebars

• Made in USA

CYCLE PERFORMANCE MINI GAUGE MOUNTS

• Designed for AutoMeter

™

tachs

• Houses 2-5/8” tachometers

• CNC precision machined from billet aluminum for durability

• Polished to a beautiful mirror finish

• Custom applications for several aftermarket handlebars

• Made in USA

1-1/2” T-Bar

1-1/4” T-Bars

2-5/8” 3-3/8” 2-5/8” 3-3/8”

Single Single Dual Dual

Application Instrument Retail Instrument Retail Instrument Retail Instrument Retail

H-D with Deuce Risers 49-3774 $63.95 49-3775 $70.95

H-D with Straight Risers 49-3755 72.95 49-3750 81.95 49-3770 $109.95 49-3771 $121.95

H-D with Pull Back Risers 49-3756 69.95 49-3751 76.95 49-3772 95.95 49-3773 106.95

H-D with Springer Risers 49-3757 76.95 49-3752 84.95

H-D with 1” T-Bars 49-3758 79.95 49-3753 88.95 49-3761 125.95 49-3760 139.95

H-D with 1-1/4” T-Bars 49-3759 79.95 49-3754 88.95 49-3763 125.95 49-3762 139.95

H-D with 1-1/2” T-Bars 49-3765 79.95 49-3764 89.95 49-3767 125.95 49-3766 139.95

VDO 2.4” Gauge Adapter 49-3776 8.95 49-3776 8.95

Straight Riser

1-1/4” T-Bars

Dual Mount

Straight Riser

Dual Mount

Pull Back Riser

Dual Mount

Gauge Adapter

INSTRUCTIONS

MINI GAUGES & MOUNTS

BIKER’S CHOICE

NEW PART NUMBERS ARE RED

INSTRUMENT & LIGHTING

532

APPAREL &

ACCESSORIES

HEADGEAR

BIKE

ACCESSORIES

SEATS &

SADDLEBAGS

FOOT

CONTROLS

FRAMES &

FENDERS

CUSTOM PAINT

SUSPENSION

BRAKES

WHEELS &

TIRES

EXHAUST

CARBS/

FUEL SYSTEMS

CABLES

CONTROL &

HANDLEBARS

OIL TANKS

& FILTERS

INSTRUMENT

& LIGHTING

IGNITION &

ELECTRICAL

ENGINE

VALVE TRAIN

PRIMARY

DRIVE

TRANSMISSION

FINAL DRIVE

GASKETS &

HARDWARE

CHEMICAL

TOOLS &

SUPPLIES

DISPLAY &

PROMO

CROSS

REFERENCE

62-0877

PRO-ONE

™

1-7/8” MINI

SPEEDO & TACH T-BAR MOUNT

• Chrome billet

• Provides for a really clean installation

• Fits 1” or 1-1/4” T-bar with 3-1/2” riser centers

• Uses cups #62-0838 (speedo) and #62-0839

(tachometer)

P/N Description Retail

62-0877 Single Gauge Mount $74.95

62-0878 Dual Gauge Mount 79.95

62-0878

62-0839

PRO-ONE

™

MINI SPEEDO & TACH CUPS

• Cups Only

• Riser clamp and mount not included,

Photo for illustration only

• These cups cover the back of the mini speedo and tach

for a super smooth look

• 1-7/8” gauge

• Fits 12mm speedo cable only

P/N Description Retail

62-0838 Speedo Cup Only $57.95

62-0839 Tach Cup Only 57.95

PRO-ONE

™

SUPER MINI 1-7/8”

SPEEDOMETERS & TACHOMETERS

•Ultra sleek 1-7/8” diameter gauges

•Works great in custom applications

• Cable driven

• Illuminated 12 volt light

P/N Description Retail

Speedometer

•2:1 drive ratio

49-4111 Black Face $104.95

62-1001 White Face 104.95

Tachometer

• Full electronic, uses the same input lead

as the stock tachometer

49-4112 Black Face $115.95

62-1002 White Face 115.95

Speedo Cup Only

Mount Not Included

BIKER’S CHOICE

™

MINI SPEEDO

WITH L.E.D. INDICATOR LIGHT

• Comes with 4 L.E.D. indicator lights

• 0-140 MPH

• Chrome-plated universal mounting bracket

•Wiring instructions included

P/N Description Retail

49-0291 2:1 $69.95

49-0292 1:1 69.95

BIKER’S CHOICE

™

MINI TACHOMETER

• Chrome-plated universal mounting bracket

•Wiring instructions included

• 2-1/2” diameter with white face

• Cable driven

49-0293 $68.98

Speedo

Cables

ON PAGE

490

49-4111

49-4112

62-1001

62-1002

INSTRUCTIONS

REPLACEMENT INSTRUMENTS

BIKER’S CHOICE

NEW PART NUMBERS ARE RED

INSTRUMENT & LIGHTING

533

APPAREL &

ACCESSORIES

HEADGEAR

BIKE

ACCESSORIES

SEATS &

SADDLEBAGS

FOOT

CONTROLS

FRAMES &

FENDERS

CUSTOM PAINT

SUSPENSION

BRAKES

WHEELS &

TIRES

EXHAUST

CARBS/

FUEL SYSTEMS

CABLES

CONTROL &

HANDLEBARS

OIL TANKS

& FILTERS

INSTRUMENT

& LIGHTING

IGNITION &

ELECTRICAL

ENGINE

VALVE TRAIN

PRIMARY

DRIVE

TRANSMISSION

FINAL DRIVE

GASKETS &

HARDWARE

CHEMICAL

TOOLS &

SUPPLIES

DISPLAY &

PROMO

CROSS

REFERENCE

49-3316

49-3374

BIKER’S CHOICE

™

CUSTOM MINI TACHOMETERS

•8000 RPM tachometer includes a

chrome mounting clamp

• 12 volt, lighted 2-1/2” diameter face

P/N Application Retail

Mechanical

49-3316 Sportster with 2:1 $38.45

Mechanical Tach Drive

Electronic

49-3374 Sportster, Big Twin $65.95

49-3304

BIKER’S CHOICE

™

CUSTOM MINI SPEEDOMETER KITS

• 160 mph speedometer

•Kits include a chrome mounting clamp and a

speedometer cable

• 12 volt, lighted, 2-1/2” diameter face

P/N Application Retail

2:1 Ratio

49-3303 52-E73 K, XL; 37-67 FL $50.45

49-3304

L73-94 XL; 73-94 FX, FXR

50.45

1:1 Ratio

49-3305 68-80 FL; 71-72 FX; $50.45

80-83 FXWG

Replacement Cable

06-6011 74-83 XL; 84-94 FXWG, $12.50

FXST; Custom Speedo Kit

H-D#67024-84T

06-6041 Custom Speedo Kits 12.50

#49-3303, #49-3305

49-0905

BIKER’S CHOICE

™

REPLACEMENT INSTRUMENTS

P/N Application Retail

Speedometers

• Includes odometer and lighting pigtail

49-2595 73 XL; 73-84 FX, (150 MPH) $47.45

H-D#67074-84T

49-0884 73 XL; 73-84 FX, (120 MPH) 47.95

H-D#67020-73B

49-3980 L84-90XL; 85 FXSB,F; 81.95

85-87 FXRS; 87-90 FXRSP H-D#67037-85

49-3982 86-94 FXR H-D#67020-85A 91.45

Tachometers

• #49-0905 may be used on 74-75 FX with

minor wiring modifications

49-0905 76-84 FX

H-D#92042-78A

$64.45

49-2595

49-0884

49-3980

Dash Mount

Kits

ON PAGE

536

Speedo Drives

ON PAGE

489

BIKER’S CHOICE

™

MINI SPEEDO GAUGE MOUNT

• CNC machined

•Triple chrome-plated

•Includes 2-piece clamp for easy mounting

on handlebar

• Houses any 2-1/4” diameter mini gauge

40-9660 Cable Drive Speedo/Tach $110.45

50’S BOY

MINI GAUGE TEARDROP CUPS

• Chrome-plated billet aluminum cups for

mini gauges using 50’s Boy mounts

P/N Application Retail

66-3352 Electronic Mini Tach $89.45

66-3355 Cable Drive Mini Speedo 93.45

YANKEE ENGINEUITY

MINI GAUGE MOUNT

• CNC machined from billet aluminum

with a polished finish

• 35˚ angle

• Fits 2-5/8” diameter gauges

• Single mount

26-0180 H-D with Straight Risers $167.95

66-3352

66-3355

INSTRUCTIONS

SPEEDOMETERS

BIKER’S CHOICE

NEW PART NUMBERS ARE RED

INSTRUMENT & LIGHTING

534

APPAREL &

ACCESSORIES

HEADGEAR

BIKE

ACCESSORIES

SEATS &

SADDLEBAGS

FOOT

CONTROLS

FRAMES &

FENDERS

CUSTOM PAINT

SUSPENSION

BRAKES

WHEELS &

TIRES

EXHAUST

CARBS/

FUEL SYSTEMS

CABLES

CONTROL &

HANDLEBARS

OIL TANKS

& FILTERS

INSTRUMENT

& LIGHTING

IGNITION &

ELECTRICAL

ENGINE

VALVE TRAIN

PRIMARY

DRIVE

TRANSMISSION

FINAL DRIVE

GASKETS &

HARDWARE

CHEMICAL

TOOLS &

SUPPLIES

DISPLAY &

PROMO

CROSS

REFERENCE

BIKER’S CHOICE

™

5” SPEEDOMETER

CUSHION SUPPORT

49-3975 FLH, FXWG, FXST, FLST $7.45

H-D#67115-91

S&S SPEEDOMETER CALIBRATOR

• Easily adjust electronic speedometers

• Easy installation.

• Plugs into O.E.M. harness

• Accurate to 1% increments

•Weather/vibration protection built in

• Fits Big Twin & Sportsters with electronic

speedometers

49-9685 $119.95

BIKER’S CHOICE

™

SPEEDOMETER CONVERSION KIT

•Ideal for converting an FX to Fat Bob tanks with

a FL dash

• Consists of a 2:1 ratio, 120 mph speedometer

and custom front wheel drive cable

• Stock front wheel speedometer drive unit must

be retained

P/N Application Retail

Conversion Kit

41-0411 73-85 FX $76.45

Replacement Cable

06-6079 Replacement Cable Only $15.90

for Kit #41-0411

P/N Description Retail

1:1 Ratio Transmission Drive

• Fits 68-80 FL, 72-72 FX; 80-83 FXWG models

Note: Speedos have 5/8” x 18 thread.

49-1320 120 mph Black Face $76.45

49-1293 Police Special 76.45

49-1296 36-40 White Face 76.45

49-1291 62-67 Antique Face 76.45

P/N Description Retail

2:1 Ratio Front Wheel Drive

• Fits 81-84 FLH models

Note: Speedos have 12mm thread.

49-1295 120 mph Black Face $76.45

49-1294 Police Special 76.45

49-1288 36-40 White Face 76.45

49-1292 62-67 Antique Face 76.45

2240:60 Ratio Front Wheel Drive

• Fits 84-86 FXWG; 84-90 Softail models

Note: Speedos have 12mm thread.

49-0040 120 mph Black Face $70.45

49-0033 41-45 Silver & Black Face 70.45

P/N Description Retail

2240:60 Ratio Front Wheel Drive

5” Domed Glass Speedometer

• Fits 84-86 FXWG; 84-90 Softail models

49-0042 120 mph Black Face $77.45

2240:60 Ratio Front Wheel Drive

& Read Switch

• Fits 91-95 Softail models

Note: Will only fit with 91-99 cast dash #49-0018 or

H-D#71241-91.

49-0043 120 mph Black Face $105.95

49-0041 120 mph Black Face Flat Face 102.45

BIKER’S CHOICE

™

5” FL TYPE SPEEDOMETERS

NATIONAL CYCLE GLARE STOPPER

• Reduces glare from illuminated sleek speedometer

• Cast metal, triple plated chrome, custom designed for

your bike

•

Installs in under 3 minutes. No tools required

•

Fits 5” FL Style Speedometer

49-0400 $52.45

120 Mph

Black Face

White Face

Antique Face

Silver & Black

Face

Police Style

Speedo Drives

ON PAGE

489

INSTRUCTIONS

GAUGE MOUNTS & ACCESSORIES

BIKER’S CHOICE

NEW PART NUMBERS ARE RED

INSTRUMENT & LIGHTING

535

APPAREL &

ACCESSORIES

HEADGEAR

BIKE

ACCESSORIES

SEATS &

SADDLEBAGS

FOOT

CONTROLS

FRAMES &

FENDERS

CUSTOM PAINT

SUSPENSION

BRAKES

WHEELS &

TIRES

EXHAUST

CARBS/

FUEL SYSTEMS

CABLES

CONTROL &

HANDLEBARS

OIL TANKS

& FILTERS

INSTRUMENT

& LIGHTING

IGNITION &

ELECTRICAL

ENGINE

VALVE TRAIN

PRIMARY

DRIVE

TRANSMISSION

FINAL DRIVE

GASKETS &

HARDWARE

CHEMICAL

TOOLS &

SUPPLIES

DISPLAY &

PROMO

CROSS

REFERENCE

49-1297

49-3392

BIKER’S CHOICE

™

ODOMETER RESET KNOBS

• Chrome-plated

• Knurled knob and screw set for large

dash-mounted speedometers

• Sold in packs of 10

P/N Application Retail

49-3392 68-84 FL; 71-72 FX; $19.95

80-89 FXWG, Softail H-D#67215-68

49-1297 90-95 Softail H-D#67215-89 23.45

50’S BOY

CUSTOM TACHOMETER MOUNTS

•Tachometer mount is designed to accept O.E.M. tach

• CNC machined, ball-milled, polished and chrome-plated

• Features an inset bezel and a 15˚ angle toward

rider for easier viewing

P/N Application Retail

66-3300 84-94 FLST; Customs $125.45

with Straight Risers

Teardrop Gauge Cups

• Chrome-plated billet aluminum cups for speedometers

and tachometers using 50’s Boy mounts

66-3356 Pre 94 Speedometers $130.45

66-3350 Pre 94 Electronic Tachs 125.45

50’S BOY TACH MOUNTS

FOR ROAD KINGS

• Chrome-plated billet aluminum mounts

•Adapts various tachometers to the Road King fork

clamp cover

• Chrome-plated billet teardrop gauge cups

available separately

P/N Application Retail

Mount for Pre 94 Electronic Tach

• Mounts pre 94 style electronic tachometers to

Road King

66-3349 94-03 FLHR $120.45

Teardrop Gauge Cups

66-3350 Pre 94 Electronic Tachs $125.45

66-3352 Electronic Mini Tachs 89.45

BIKER’S CHOICE

™

SPEEDO & TACH INSTRUMENT CUPS

• Chrome

49-0856 83-90 XL, FX; L83-90 FXR $25.95

H-D#67090-85

BIKER’S CHOICE

™

DUAL INSTRUMENT BRACKET

• Chrome-plated, stamped steel bracket

• An exact reproduction of the O.E.M. bracket

•Provision for 3 warning lights

49-2645 84-85 XL, FXR, FXRT (3-hole) $21.45

H-D#67110-83T

BIKER’S CHOICE

™

SPEEDO TRIM RING

• Chrome-plated steel ring

• Covers stock bezel

• Installs with silicone adhesive

• Sold individually

49-0705 47-95 FLH, Softail, FXDWG $20.45

with 5” Speedo

BIKER’S CHOICE

™

ODOMETER

RESET KNOBS FOR NARROW GLIDES

49-2994 86-94 FXR; 88-93 FXRS; $20.95

91-95 Dyna (exc.FXDWG) H-D#67122-85

BIKER’S CHOICE

™

ODOMETER RESET CABLE & KNOB

• Chrome-plated

• Knurled knob and cable assembled

• Ready for installation

49-2624 73-84 FX Models $11.95

(exc. 81-82 FXWG; L84 FXE)

H-D#67210-73T

NESS-TECH

™

GAUGE MOUNT

• Chrome-plated billet aluminum

•Will mount stock size gauges to 1” diameter T-bars

• Dual mount

49-4115 84-94 XL, FXR $84.95

INSTRUCTIONS

DASHES

BIKER’S CHOICE

NEW PART NUMBERS ARE RED

INSTRUMENT & LIGHTING

536

APPAREL &

ACCESSORIES

HEADGEAR

BIKE

ACCESSORIES

SEATS &

SADDLEBAGS

FOOT

CONTROLS

FRAMES &

FENDERS

CUSTOM PAINT

SUSPENSION

BRAKES

WHEELS &

TIRES

EXHAUST

CARBS/

FUEL SYSTEMS

CABLES

CONTROL &

HANDLEBARS

OIL TANKS

& FILTERS

INSTRUMENT

& LIGHTING

IGNITION &

ELECTRICAL

ENGINE

VALVE TRAIN

PRIMARY

DRIVE

TRANSMISSION

FINAL DRIVE

GASKETS &

HARDWARE

CHEMICAL

TOOLS &

SUPPLIES

DISPLAY &

PROMO

CROSS

REFERENCE

BIKER’S CHOICE

™

DASH MOUNT

• Billet aluminum

•Mounts 5” electronic O.E.M. speedo and barrel key

ignition switch to A.B.S. dash

21-6575 93-01 Big Twin $40.95

with 5” Speedo, Flat Side Tanks

49-0235

49-0244

Electric Speedo

Module

ON PAGE

528

BIKER’S CHOICE

™

LOW RIDER DASH PANEL

49-2404

77-85 FX H-D#61647-77T

$24.45

BIKER’S CHOICE

™

FAT BOB SPEEDOMETER KITS

• Allows for a trouble-free installation when converting

to Fat Bob tanks

• Kit includes dash cover, 120 mph speedometer, dash

base plate (with wiring, sockets and hardware)

and ignition switch

P/N Application Retail

2-Light

41-0340 36-67 FL; 73-93 FX, FXR $151.95

with Front Speedo Drive 2:1

41-0339 68-83 FL, FX with 163.45

Trans Speedo Drive 1:1

3-Light

41-0330 36-67 FL; 73-93 FX, FXR $156.45

with 2:1 Speedo Drive

41-0329 68-83 FL, FX with 167.95

Trans Speedo Drive 1:1

BIKER’S CHOICE

™

FAT BOB

INSTRUMENT PANEL BASE PLATES

•Includes wiring, lamp sockets, dash

mounting stud and screw

• Zinc-plated steel

P/N Application Retail

2-Light

49-2696 47-64 FL H-D#70950-47 $30.95

3-Light

49-2698 62-67 FL H-D#70952-65 $35.95

5-Light

49-0247 68-94 FL; 71-72 FX; $61.45

80-86 FXWG; 84-95 Softail

5-Light Base Plate Only

49-0246 68-84 FL; 71-72 FX; $28.45

80-86 FXWG; 84-95 Softail H-D#70935-73

49-0243

BIKER’S CHOICE

™

DIE-CAST FAT BOB DASH COVER

• Chrome-plated

• Replica of die-cast dash cover

• Complete with lenses, lens retainer,

hardware and mounting gaskets

P/N Application Retail

49-0243 68-84 FL; 71-72 FX; $60.45

80-86 FXWG; 84-90 Softail H-D#71241-77T

49-0018 91-95 Softail Models 70.45

Replacement Gaskets

49-2833 68-95 FL, Softail Models $6.45

H-D#71295-68

49-2754

BIKER’S CHOICE

™

FAT BOB DASH COVERS

• Chrome-plated steel dash

•Cover includes lenses and rubber mounting gaskets

P/N Application Retail

2-Light Style

• Includes generator and oil pressure

warning lamp lenses

49-2754

47-61 FL H-D#71274-61T

$39.95

3-Light Style

•Includes generator, oil and neutral

warning lamp lenses

49-2755 62-67 FL H-D#71270-62T $39.95

Dash Cover Rubber Seal

• Molded rubber gasket insulates dash

cover from tanks

49-2756 47-67 FL H-D#71294-47 $3.45

41-0010

BIKER’S CHOICE

™

CAST DASH SPEEDO KIT

• Complete kit allows for trouble-free installation

• Speedometer ratio 2240:60

• Kit includes dash cover, 120 mph speedometer, dash

base plate (with wiring sockets and hardware)

and ignition switch

P/N Application Retail

41-0010 84-90 Softail Models $204.95

Late Model

• Speedo has turn signal read switch

41-0011 91-95 Softail Models $242.45

BIKER’S CHOICE

™

LOW RIDER DASHES

• Heavy-duty, chrome-plated steel dash

• O.E.M. replica

•Rubber mounting strip must be ordered separately

P/N Application Retail

49-0244 77-84 FXS with Fat Bob Tanks $28.45

H-D#71301-77T

49-0235 88-92 FXRS; 91-95 FXDB 49.45

H-D#67189-88

Rubber Mount Strip

• Rubber strip reduces vibration and

seals out the elements

49-2428 Fits #49-0244 & Stock $5.95

FX Low Rider Dash

Hardware Kit

• Buttonhead allen style

04-1694 77-84 FXS Low Rider $1.19

H-D#70902-77

INSTRUCTIONS

DASHES & ACCESSORIES

BIKER’S CHOICE

NEW PART NUMBERS ARE RED

INSTRUMENT & LIGHTING

537

APPAREL &

ACCESSORIES

HEADGEAR

BIKE

ACCESSORIES

SEATS &

SADDLEBAGS

FOOT

CONTROLS

FRAMES &

FENDERS

CUSTOM PAINT

SUSPENSION

BRAKES

WHEELS &

TIRES

EXHAUST

CARBS/

FUEL SYSTEMS

CABLES

CONTROL &

HANDLEBARS

OIL TANKS

& FILTERS

INSTRUMENT

& LIGHTING

IGNITION &

ELECTRICAL

ENGINE

VALVE TRAIN

PRIMARY

DRIVE

TRANSMISSION

FINAL DRIVE

GASKETS &

HARDWARE

CHEMICAL

TOOLS &

SUPPLIES

DISPLAY &

PROMO

CROSS

REFERENCE

KURYAKYN

™

DASH INSERT

• Chrome-plated

• Place this 3 dimensional trim plate at the bottom of

the Road King dash for a sleeker, more finished look

49-7273 Road King (Mfg/N 1518) $18.95

51-0426

51-0430

PRO-ONE

™

ROAD KING DASH PANEL

• Replaces stock dash perfectly for an unique

custom touch

P/N Application Retail

Smooth

62-0801 94-04 FLHR Models $189.95

Ball-Milled

62-0802 94-04 FLHR Models $189.95

PEREWITZ

“THE LOOK” DYNA DASH

• Paintable

• Durable injection molded ABS plastic

51-0429 91-99 FXDL Models $54.99

DASH RUBBER MOUNT

•Exceeds the O.E.M. mount in tensile strength,

resistance and overall quality

• 5/16”-18 stud at 1 end; 5/16”-18 hole

on the other end

61-2089 77-L84 FXS, FXE $5.95

BIKER’S CHOICE

™

LOW RIDER DASH MOUNT KIT

•Mounting kit includes all necessary hardware

for proper installation

49-2626 77-84 FXS with $16.45

Fat Bob Tanks H-D#70904-77

BIKER’S CHOICE

™

FAT BOB DASH STUD & SCREW KIT

•Kit includes chrome center screw and stud without

choke cable hole

49-2697 47-67 FL H-D#71075-47 $7.45

WILD 1

™

SKULL DASH NUT

49-5015 90-93 Softail Models $20.45

PEREWITZ “THE LOOK” FAT BOB DASHES

• Fits stock tanks, has cutouts for speedo and ignition switch

• Designed exclusively for Biker’s Choice

™

by Dave Perewitz

• Paintable ABS material

P/N Application Retail

Speedo Style

51-0426 Big Twin with Perewitz Stretched Fat Bob Tanks $73.45

No-Dash Dash

51-0430 Big Twin with Perewitz Stretched Fat Bob Tanks $63.45

DASH COVER

CUSTOM HARDWARE KIT

• Acorn

04-4327 82-94 FXR (exc. 88-92 FXRS) $8.95

INSTRUCTIONS

TANK PANELS

BIKER’S CHOICE

NEW PART NUMBERS ARE RED

INSTRUMENT & LIGHTING

538

APPAREL &

ACCESSORIES

HEADGEAR

BIKE

ACCESSORIES

SEATS &

SADDLEBAGS

FOOT

CONTROLS

FRAMES &

FENDERS

CUSTOM PAINT

SUSPENSION

BRAKES

WHEELS &

TIRES

EXHAUST

CARBS/

FUEL SYSTEMS

CABLES

CONTROL &

HANDLEBARS

OIL TANKS

& FILTERS

INSTRUMENT

& LIGHTING

IGNITION &

ELECTRICAL

ENGINE

VALVE TRAIN

PRIMARY

DRIVE

TRANSMISSION

FINAL DRIVE

GASKETS &

HARDWARE

CHEMICAL

TOOLS &

SUPPLIES

DISPLAY &

PROMO

CROSS

REFERENCE

61-1055

10-8484

10-8636

10-8483

ACE POCKET STYLE TANK PANELS

• Concho mounted on leather medallion closes over

storage pouch

P/N Application Retail

Rectangular

10-8634 68-86 FL, FXWG $68.95

Low Rider

10-8636 77-85 FX $83.95

Softail

10-8629 84-99 Softail $71.95

Dyna

10-8483 91-01 Dyna Low Rider $71.95

10-8484 93-01 Dyna Wide Glide 59.95

ACE TANK PANELS

WITH CONCHO AND SPOTS

10-8626 84-99 Softail Models $52.95

ACE SILVER SPOONS

LEATHER TANK PANEL

• Fits all 84-99 Softail Models

10-7909 Pouch & Studs $75.95

BIKER’S CHOICE

™

DIE-CAST FAT BOB TANK PANEL

• Chrome, die-cast tank panel

• Replaces H-D#61141-82 stock rubber tank panel

49-0240 68-99 Big Twin with $24.95

Cast Dash H-D#61118-81

BIKER’S CHOICE

™

FAT BOB TANK PANELS

49-2401 41-84 FL Models $16.45

20-0104

41-0333

49-2625

41-0335

INDICATOR LAMPS

• Direct O.E.M. type replacements

P/N Application Retail

Red High Beam

49-2625

67-73 XLCH;70-73 XLH; 73-74 FX

$7.95

H-D#67891-68

Blue High Beam

20-0104 Replaces H-D#67862-86 $7.00

Red Generator or Oil

41-0333 75-82 XL; 75-85 FX $6.29

H-D#68536-75

20-0105 Replaces H-D#68536-86 6.46

Green Neutral

41-0335 75-85 FX; 82-83 FXR $6.29

H-D#67851-75

20-0106 Replaces H-D#67851-86 6.46

Turn Signal

• Amber

20-0107 Replaces H-D#67864-86 $6.46

BIKER’S CHOICE

™

LIGHT SOCKET

• Replacement light socket

49-3153 5” Speedometers $6.95

10-8629

10-8634

HOPNEL

TUXEDO

™

TANK BIB

• 2-piece set

• Fits 96-03 Ultra Classic

41-7503 $25.95

HOPNEL

TUXEDO

™

TRUNK BIB

• Dual textures with signature concho

• Non-marring backs to protect finish

• Fits 80-03 Classic

41-7531 $25.95

PRO-ONE

™

UPPER TANK COVER

• Machined from billet aluminum and chrome-plated

• Ball-milled style

• Made in USA

P/N Application Retail

61-1055 68-95 Big Twin with Cast Dash; $88.95

83-86 FXWG

61-0938 93-03 Dyna Wide Glide 88.95

61-1057

PRO-ONE

™

LOWER TANK PANEL

• Machined from billet aluminum and chrome-plated

• Made in USA

P/N Application Retail

61-1057 83-86 FXWG; 84-99 Softail $78.95

61-0939 93-99 Dyna Wide Glide 78.95

INSTRUCTIONS

PIAA BULB DISPLAYS

BIKER’S CHOICE

NEW PART NUMBERS ARE RED

INSTRUMENT & LIGHTING

539

APPAREL &

ACCESSORIES

HEADGEAR

BIKE

ACCESSORIES

SEATS &

SADDLEBAGS

FOOT

CONTROLS

FRAMES &

FENDERS

CUSTOM PAINT

SUSPENSION

BRAKES

WHEELS &

TIRES

EXHAUST

CARBS/

FUEL SYSTEMS

CABLES

CONTROL &

HANDLEBARS

OIL TANKS

& FILTERS

INSTRUMENT

& LIGHTING

IGNITION &

ELECTRICAL

ENGINE

VALVE TRAIN

PRIMARY

DRIVE

TRANSMISSION

FINAL DRIVE

GASKETS &

HARDWARE

CHEMICAL

TOOLS &

SUPPLIES

DISPLAY &

PROMO

CROSS

REFERENCE

H-3

H-4

20-0130

PIAA SPECIFIC BULB DESIGN FEATURES:

• Metal bond that holds glass securely preventing cracks and leaks

• Heat resistant glass tube

•Welded focus ring assuring proper positioning

• 1-piece filament support for perfect positioning

• XTRA technology for greater output and performance

• 100% quality control testing for perfect performance

• 1-year manufacturer’s performance warranty

Super Plasma - At 5000 Kelvin, the Super Plasma bulbs offer an unmatched combination of

fashion and performance

Super White - Super White Technology approaches the color and intensity of H.I.D. color temperature,

3800 Kelvin

XTRA - Technology that boosts the light from standard wattage to equal a high wattage

Xtreme White - With a 4150 Kelvin color temperature, Xtreme White bulbs give a cool white light output. The

closest color yet to H.I.D. This white light gives the driver better color recognition on depth perception and

better contrast than conventional halogen lamps

Xtreme White Plus - The blue top coat on the 9000 series bulbs add a slight blue tint to the lamp with no loss of

performance. Xtreme White Plus bulbs are whiter, brighter and close to the color of sunlight

PIAA WORKING BULB DISPLAY

• Plastic locking display cabinet

20-0110

PIAA Working Bulb Display Includes:

(2) 20-0119H-1 55W = 110W Xtreme White

(2) 20-0138H-3 35W = 70W Xtreme White

(4) 20-0133H-3 55W = 110W Xtreme White

(2) 20-0134H-4 60W/55W = 110W/100W Xtreme White Anti-Vibration

(2) 20-0131H-4 60W/55W = 130W/100W Super Plasma

(6) 20-0116H-7 55W = 110W Xtreme White Plus

(2) 20-01361156 27W Xtreme White (Twin Pack)

(2) 20-01371157 27W/8W Xtreme White (Twin Pack)

PIAA 12-PACK SMALL BULB DISPLAY

20-0111

PIAA 12-Pack Small Bulb Display Includes:

(2) 20-0119H-1 55W = 110W Xtreme White

(2) 20-0131H-4 60W/55W = 130W/100W Super Plasma

(2) 20-0134H-4 60W/55W = 110W/100W Xtreme White Anti-Vibration

(2) 20-0133H-3 55W = 110W Xtreme White

(4) 20-0116H-7 55W = 110W Xtreme White Plus

PIAA WORKING BULB DISPLAY

• Plastic locking display cabinet

20-0130

PIAA Working Bulb Display Includes:

(4) 20-0134H-4 60/55W = 110W/100W Xtreme White Anti-Vibration

(2) 20-0133H-3 55W = 110W Xtreme White

(2) 20-0120H-4 60W/55W = 110W/100W Super White

(2) 20-0122H-4 80W/80W = 135/115W Super White

(4) 20-0131H-4 60W/55W = 130W/100W Super Plasma

(2) 20-0132H3 55W = 85W Super Plasma

(2) 20-0135Xtreme White Wedge Bulb 12V - 5W, 168 (Twin Pack)

(4) 20-0136Xtreme White 1156 Single Filament 27W (Twin Pack)

(4) 20-0137Xtreme White 1157 Dual Filament 27W (Twin Pack)

INSTRUCTIONS

PIAA BULBS

BIKER’S CHOICE

NEW PART NUMBERS ARE RED

INSTRUMENT & LIGHTING

540

APPAREL &

ACCESSORIES

HEADGEAR

BIKE

ACCESSORIES

SEATS &

SADDLEBAGS

FOOT

CONTROLS

FRAMES &

FENDERS

CUSTOM PAINT

SUSPENSION

BRAKES

WHEELS &

TIRES

EXHAUST

CARBS/

FUEL SYSTEMS

CABLES

CONTROL &

HANDLEBARS

OIL TANKS

& FILTERS

INSTRUMENT

& LIGHTING

IGNITION &

ELECTRICAL

ENGINE

VALVE TRAIN

PRIMARY

DRIVE

TRANSMISSION

FINAL DRIVE

GASKETS &

HARDWARE

CHEMICAL

TOOLS &

SUPPLIES

DISPLAY &

PROMO

CROSS

REFERENCE

20-0131

20-0132

PIAA XTREME WHITE WEDGE BULBS

•5 watt halogen bulb replaces HD#53439-79

• Extreme white output

• 12 volt rated

• Markers, dash panels, trunks, fender tip lights, etc.

• Sold in pairs

20-0135 Xtreme White (168 5W) $14.50

PIAA XTREME WHITE 1156 & 1157 BULBS

• Sold in Pairs

P/N Description

Retail

20-0136 Single Filament 1156 (Single)

$14.50

20-0137 Dual Filament 1157 (Stop & Turn)

14.50

20-0128

PIAA SUPER PLASMA BULBS

P/N Description Retail

20-0131 H-4 60W/55W = 130W/110W $49.50

20-0132 H-3 55W = 55W/85W 37.95

20-0128 168 5W Wedge (2 pk) 14.50

PIAA XTREME WHITE BULBS

P/N Description Retail

20-0134 H-4 60/55W = 110W/100W Anti-Vibration $49.50

(Xtreme White Plus)

20-0133 H-3 55W = 110W XTRA 34.29

20-0138 H-3 35W = 70W 36.50

20-0135 168 5W Wedge Bulb 14.50

PIAA SUPER WHITE BULBS

P/N Description Retail

20-0120 H-4 60/55W = 110W/100W $37.95

20-0122 H-4 80/80W = 135/115W 44.50

20-0125 H-3 35W = 60W 20.29

20-0123 H-3 55W = 85W 24.99

20-0126 168 5W Wedge (2 pk) 14.49

20-0120

20-0134

20-0133

20-0123

20-0122

20-0125

20-0126

INSTRUCTIONS

REPLACEMENT BULBS

BIKER’S CHOICE

NEW PART NUMBERS ARE RED

INSTRUMENT & LIGHTING

541

APPAREL &

ACCESSORIES

HEADGEAR

BIKE

ACCESSORIES

SEATS &

SADDLEBAGS

FOOT

CONTROLS

FRAMES &

FENDERS

CUSTOM PAINT

SUSPENSION

BRAKES

WHEELS &

TIRES

EXHAUST

CARBS/

FUEL SYSTEMS

CABLES

CONTROL &

HANDLEBARS

OIL TANKS

& FILTERS

INSTRUMENT

& LIGHTING

IGNITION &

ELECTRICAL

ENGINE

VALVE TRAIN

PRIMARY

DRIVE

TRANSMISSION

FINAL DRIVE

GASKETS &

HARDWARE

CHEMICAL

TOOLS &

SUPPLIES

DISPLAY &

PROMO

CROSS

REFERENCE

12 VOLT REPLACEMENT BULBS

Note: Number in parentheses is the SAE standard lamp designation.

P/N Indicator Retail

•Sold in packs of 10, priced individually

A. 20-0003 High Beam (#53) H-D#71099-74 $.60

A. 20-0025 (#57) H-D#68462-64 .60

Turn Signal

•Sold in packs of 10, priced individually

B. 20-0017 Single Filament (#1156) H-D#68572-64A $.75

B. 20-0027 Dual Filament (#1176) 1.95

Stop/Tail Lamp

•Sold in packs of 10, priced individually

C. 20-0008 Dual Filament (#1157) H-D#68165-64 $.60

C. 20-7272 Heavy Duty (#1157) H-D#68165-64 1.05

Quartz Stop Tail Lamp

D. 20-0032 Clear Halogen 12V 50/15W D.O.T. Approved $11.50

E. 20-0038 L.E.D. (#1157R) D.O.T. Approved 26.95

F. 20-7271 Wedge for Side & Tail Lamp 12V 5W .68

REPLACEMENT LIGHT BULBS

• D.O.T. approved

• Sold in packs of 10, priced individually

P/N Application Ref. Mfg/N Volts Elements Power Retail

20-0002 Instruments A 51 6 1 1 $.60

20-0003 Instruments A 53 12 1 1 .60

20-0022 Signal B 1129 6 1 21 .85

20-0017 Signal B 1156 12 1 32 .75

20-0012 Stop and Tail C 1154 6 2 21/3 .75

20-0008 Stop and Tail C 1157 12 2 32/3 .60

20-0018

Headlight D R395 12 2 35w 5.50

20-0019 Running E R264 12 1 10w 1.50

20-7194 Instrument F GE194 12 1 2w .60

Sold Individually

H-4 QUARTZ HALOGEN BULBS

P/N Description

Retail

20-0000 60/55W 12V $6.50

20-0001

60/55W 12V 11.50

20-0006

100/55W 12V 10.50

20-0020

130/90W 12V 15.95

Not approved for use on public roads

Heavy-duty

CANDLEPOWER XENON XB

BOOSTED BRIGHT WHITE BULB

• D.O.T. approved

• Designed to replace a standard H-4 bulb

• Requires no wiring modification or special installation

•Keeps light on the rider’s side of the road

• Reduces glare to oncoming traffic

P/N Description

Retail

20-0034 H-4 12V 60/55W $19.25

Brite Lite Premium Blue

20-0035 H-4 12V 100/55W 25.75

RAINBOW STROBE FOR HEADLIGHT

• Noticeable to oncoming traffic and pedestrians but

does not dazzle

• For use in headlights using 9003 or H-4 bulbs

•All light lumen are still projected on the road ahead

20-0040 $26.25

BULBS

• Standard H-4 12 volt bulbs

• Gold H-4 has gold ion-crystal coating, creating an amber glow

•All-weather H-4 directly replaces most O.E.M. aftermarket bulbs

• Not D.O.T. approved

P/N Description

Retail

20-0029

Yellow H4 12V 60/55W

$15.95

20-0030

Gold H4 12V 60/55W

24.95

20-0031 All Weather H4 - Gold 60/55W

15.95

20-0033 All Weather H4 - Blue 60/55W

12.95

20-0032 Halogen H1157 12V 50/15W

11.50

Not approved for use on public roads

SIGNAL/MARKER

LIGHT BULB

• Dual filament 12V

• 1157 Amber

•Sold in packs of 10, priced individually

26-8046 $1.95

INSTRUCTIONS

REPLACEMENT BEAMS

BIKER’S CHOICE

NEW PART NUMBERS ARE RED

INSTRUMENT & LIGHTING

542

APPAREL &

ACCESSORIES

HEADGEAR

BIKE

ACCESSORIES

SEATS &

SADDLEBAGS

FOOT

CONTROLS

FRAMES &

FENDERS

CUSTOM PAINT

SUSPENSION

BRAKES

WHEELS &

TIRES

EXHAUST

CARBS/

FUEL SYSTEMS

CABLES

CONTROL &

HANDLEBARS

OIL TANKS

& FILTERS

INSTRUMENT

& LIGHTING

IGNITION &

ELECTRICAL

ENGINE

VALVE TRAIN

PRIMARY

DRIVE

TRANSMISSION

FINAL DRIVE

GASKETS &

HARDWARE

CHEMICAL

TOOLS &

SUPPLIES

DISPLAY &

PROMO

CROSS

REFERENCE

59-0326

Ice Spot Lamp

59-0382

Diamond Cut Head Lamp

59-0321

Wave Head Lamp

MR16 Spot Lamp

59-0300

TRI BAR CUSTOM LAMPS

• 4-1/2” Tri Bar comes H3/55 watt bulb

• 5-3/4” Tri Bar comes with a H-4 halogen

60/55 watt bulb

• 7” Tri Bar comes with a H-4 halogen

60/55 watt bulb

P/N Size Retail

59-0303 4-1/2” Spot Lamp $80.42

59-0300 5-3/4” Head Lamp 110.29

59-0301 7“ Head Lamp 110.29

Replacement Bulbs

20-0125 4-1/2” $20.29

20-0001 5-3/4” & 7” 11.50

59-0301

Trillient Head Lamp

59-0322

59-0328

ADJURE PRIZM LIGHTS

• D.O.T. approved

• High performance

• Diamond cut

• Space age halogen headlamps

• Engineered for low and high speed riding

• 3” and 4-1/2” spot lamps use 35 watt H-3 bulb

• 4-1/2”, 5-3/4” and 7” Head Lamps

use 55/60 watt H-4

• Bulbs included

• Enhance the cosmetic appeal of

your motorcycle

•Available sizes 4-1/2”, 5-3/4” and 7”

Trillient Spot Lamp

59-0327

Wave Spot Lamp

59-0324

Smooth Spot Lamp

59-0303

P/N Description Retail

3” Spot Lamp

•Sold in pairs

49-8482 MR16 $99.99

49-8483 Wave 99.99

49-8484 Flute 99.99

4-1/2” Spot Lamp

•Sold in pairs

Note: Not for use with National Cycle light bars.

59-0324 Smooth $35.99

59-0326 Ice 89.99

59-0327 Wave 129.99

59-0328 Trillient 129.99

P/N Description Retail

4-1/2” Head Lamp

59-0382 Diamond Cut $69.99

5-3/4” Head Lamp

59-0329 Ice $59.99

59-0330 Wave 77.99

59-0331 Trillient 77.99

7” Head Lamp

59-0320 Ice $69.99

59-0321 Wave 99.99

59-0322 Trillient 99.99

Replacement Bulbs

49-8499 H-4 $7.99

49-8500 H-3 4.99

Ice Head Lamp

59-0320

Spot Lamp

Brackets

ON PAGE

546

49-8482

Wave Spot Lamp

49-8483

Flute Spot Lamp

49-8484

INSTRUCTIONS

HEADLIGHTS

BIKER’S CHOICE

NEW PART NUMBERS ARE RED

INSTRUMENT & LIGHTING

543

APPAREL &

ACCESSORIES

HEADGEAR

BIKE

ACCESSORIES

SEATS &

SADDLEBAGS

FOOT

CONTROLS

FRAMES &

FENDERS

CUSTOM PAINT

SUSPENSION

BRAKES

WHEELS &

TIRES

EXHAUST

CARBS/

FUEL SYSTEMS

CABLES

CONTROL &

HANDLEBARS

OIL TANKS

& FILTERS

INSTRUMENT

& LIGHTING

IGNITION &

ELECTRICAL

ENGINE

VALVE TRAIN

PRIMARY

DRIVE

TRANSMISSION

FINAL DRIVE

GASKETS &

HARDWARE

CHEMICAL

TOOLS &

SUPPLIES

DISPLAY &

PROMO

CROSS

REFERENCE

7” Smooth

7” Flame

ADJURE HEADLIGHT BUCKETS

• Buckets Only

• Precision, die-cast formed aluminum buckets

• Show-chrome finished using copper-nickel process

• Headlights use standard 3/4” mounting block;

spotlights feature mounting post similar to O.E.M. buckets

• Flame models feature “raised” detail

• Order lamp assemblies separate

• Sold individually

P/N Description Retail

49-8481 3” Spot Lamp Flame $272.99

49-8480 3” Spot Lamp Smooth 249.99

59-0381 4-1/2” Headlight Flame 173.99

59-0380 4-1/2” Headlight Smooth 149.99

59-0364 4-1/2” Spot Lamp Flame 173.99

59-0365 4-1/2” Spot Lamp Smooth 149.99

59-0362 5-3/4” Flame 194.99

59-0363 5-3/4” Smooth 179.99

59-0360 7” Flame 239.99

59-0361 7” Smooth 209.99

BIKER’S CHOICE

™

BILLET ALUMINUM HEADLIGHT

• 5-3/4” clear shatter-proof lens

• 6061 billet aluminum-chromed

• Chrome pivoting bracket, bolts and washers

• H4 55 watt clear bulb

60-0359 $199.99

PEREWITZ “THE LOOK” HEADLIGHT

• 5-3/4”

• Housing paintable A.B.S. plastic

• Design matches shape of gas tank

• Billet mount

• Chrome bezel

• Includes headlamp

49-7585 Custom Applications $145.79

BIKER’S CHOICE

™

ALUMINUM HEADLIGHT

•High quality chrome aluminum

• Billet trim ring

• DOT approved lens

• H4 12V 60/55 bulb

48-9608 7” Headlight $229.95

O.E.M.

REPLACEMENT SEALED BEAMS

• Direct O.E.M. type replacement sealed beams are

vibration resistant

P/N Application Retail

Standard 5-3/4”

20-0086 6 Volt (mfr.# 4020) $15.95

H-D#67717-59

20-0087 12 Volt (mfr.# 4420) 10.45

H-D#67717-65A

Standard 7”

20-0088 6 Volt (mfr.# 6006) $7.95

H-D#67717-48B

20-0089 12 Volt (mfr.# 6014) 7.95

H-D#67755-81A

Quartz-Halogen 5-3/4”

• Unique quartz-halogen sealed beam lamp

is substantially brighter than conventional

incandescent lamps

20-0090 12 Volt (mfr.# H4467) $12.45

H-D#67698-81C

Quartz Halogen 7”

20-0079 12 Volt (mfr.# H6024) $29.95

7”

5-3/4”

20-0004

QUARTZ HEAD LAMP CONVERSIONS

• Quartz head lamps have more than 4 times the

intensity of conventional sealed beams

•

5-3/4” conversions include a special Neoprene

gasket

to insure proper fit in custom and O.E.M. bottom

mount headlights

• Both conversions include a 55/60 watt H-4 bulb

P/N Application Retail

20-0005 For 5-3/4” Head Lamp $46.95

Assemblies

20-0004 For 7” Head Lamp 47.95

Assemblies H-D#67755-81A

SEALED BEAM

• Standard 4-1/2”

•3 lug, 40W/40W

20-0084 12 Volt (mfr.# 4440X) $16.50

INSTRUCTIONS

O.E.M. HEAD LAMPS & COVERS

BIKER’S CHOICE

NEW PART NUMBERS ARE RED

INSTRUMENT & LIGHTING

544

APPAREL &

ACCESSORIES

HEADGEAR

BIKE

ACCESSORIES

SEATS &

SADDLEBAGS

FOOT

CONTROLS

FRAMES &

FENDERS

CUSTOM PAINT

SUSPENSION

BRAKES

WHEELS &

TIRES

EXHAUST

CARBS/

FUEL SYSTEMS

CABLES

CONTROL &

HANDLEBARS

OIL TANKS

& FILTERS

INSTRUMENT

& LIGHTING

IGNITION &

ELECTRICAL

ENGINE

VALVE TRAIN

PRIMARY

DRIVE

TRANSMISSION

FINAL DRIVE

GASKETS &

HARDWARE

CHEMICAL

TOOLS &

SUPPLIES

DISPLAY &

PROMO

CROSS

REFERENCE

BIKER’S CHOICE

™

HEADLIGHT CONVERSION KIT

• Change the look of a Softail to a FL style

• Chrome-plated 7” headlight shroud

• Includes: 2-piece head lamp housing, all mounting

brackets, headlight bracket, hardware, chrome slider

cover, cover for lower triple tree and handlebar riser

• Must change passing lamp bracket and windshield

49-8400 86-03 FLST (exc. FLSTS) $479.95

41-0312

41-0313

BIKER’S CHOICE

™

CUSTOM HEAD LAMPS

• High quality, chrome-plated custom head lamps

• Includes Wagner

sealed beam and high beam

indicator

• Wired and ready for installation

P/N Description Retail

5-3/4” Bottom Mount

41-0311 6 Volt $47.45

41-0312 12 Volt 42.45

5-3/4” Side Mount

41-0313 12 Volt $39.95

41-0309

BIKER’S CHOICE

™

7” O.E.M. TYPE HEAD LAMP

• Chrome

• High quality head lamp

•A reproduction of the H-D original

• Includes a Wagner

sealed beam, wired and ready

for installation

• Mounting bracket notincluded, sold separately

P/N Application Retail

41-0310 6 Volt H-D#67701-49 $72.45

41-0309 12 Volt H-D#67701-49 72.45

Mounting Brackets

• Chrome-plated

49-2916

49-59 FL H-D#67810-48A

$9.95

49-2557 80-03 FXWG, FXST 15.45

49-2916

49-2557

41-0308

41-0314

BIKER’S CHOICE

™

5-3/4” O.E.M. TYPE HEAD LAMPS

• Chrome

• High quality

• Direct O.E.M. type replacements

• Sealed beam, trim rings and hardware included

P/N Application Retail

41-0314 63-74 XLCH; 67-74 XLH; $42.95

71-74 FX H-D#67733-72

41-0308 75-83 XL; 75-E84 FX; 82-85 FXR 42.95

(exc. 85 FXRS) H-D#67705-74

BIKER’S CHOICE

™

NACELLE WITH HEADLIGHT

• Chrome-plated

•Includes inner and outer bucket, chrome-plated outer

ring and halogen 7” headlight

41-1096 70-84 FL Models $263.95

60-1615

59-9019

BIKER’S CHOICE

™

HEADLIGHT

• Chrome

• Fits many stock and custom applications

P/N Application Retail

5-3/4”

• Comes with 12 volt sealed beam

• Mounting block not included

59-9019 Sportster, Big Twin with 5-3/4” $69.95

6-1/2” Springer

• Comes with mounting block and 12 volt quartz bulb

•Mounting brackets and headlight shell have been

re-designed for more stability

60-1615 12 Volt $94.95

Replacement Lens

• Replacement lens for Biker’s Choice

™

#60-1615

60-1619 Springer Headlight $14.45

59-9276

59-9078

59-9076

59-9018

PAUGHCO BULLET HEADLIGHT

•A full 7” headlight shell

•Tapered back to eliminate the “tractor style” look of

a stock Hydra-Glide type shell

• Ideal for Wide Glide front end without fork tins

P/N Application Retail

Headlight

59-9018 Sportster, Big Twin $99.95

Mounting Brackets

59-9076 H-D with Paughco Springer $14.95

59-9276 FXWG, FXST 12.95

59-9078 68-84 FL 12.95

ADJURE 3/4” HEADLIGHT

MOUNTING BLOCK

• Polished aluminum

• 3/8”-16 threads for bottom mount applications

49-8501 $8.99

INSTRUCTIONS

Page is loading ...

Dakota Digital 2000 User manual

Brand: Dakota Digital

Model: 2000

Category: Motorcycle Accessories

Type: User manual

This manual is also suitable for

Download PDF

report

Dakota Digital 2000 User manual

This manual is also suitable for

Dakota Digital 2000 User manual

Related papers

Other documents