Kenmore 587.1523 User manual

Category
Dishwashers
Type
User manual
Dishwasher
Use & Care Guide
Lavavajillas
Manual de uso y cuidado
Model/Modelo 587.1523*, 587.1623*, 587.1824
*
*
=color number, número de color
154765401
Sears Roebuck and Co., Hoffman Estates, IL 60179 U.S.A.
Sears Canada Inc., Toronto, Ontario, Canada M5B 2B8
www.sears.com
www.sears.ca
ENGLISHENGLISH
ENGLISHENGLISH
ENGLISH
ESPESP
ESPESP
ESP
AÑOLAÑOL
AÑOLAÑOL
AÑOL
®
2
Warranty...................................................................... 3
Safety Instructions ...................................................... 4
Before Using Your Dishwasher .................................. 5
Dishwasher Features .................................................. 6
Wash System .............................................................. 7
Operating Instructions ............................................. 7-9
Preparing and Loading Dishes ...................... 10-12
Dishwasher Dispenser and Detergents .............. 13-14
Factors Affecting Performance ................................ 14
Care and Cleaning ................................................... 15
Solutions to Common
Dishwashing Problems........................................ 16-17
Service .......................................................Back Cover
TT
TT
T
able of Contentsable of Contents
able of Contentsable of Contents
able of Contents
ENGLISHENGLISH
ENGLISHENGLISH
ENGLISH
Master ProtectionMaster Protection
Master ProtectionMaster Protection
Master Protection
AgreementsAgreements
AgreementsAgreements
Agreements
Congratulations on making a smart purchase.
Your new
Kenmore
®
product is designed and manufactured for years
of dependable operation. But like all products, it may
require preventive maintenance or repair from time to time.
That's when having a Master Protection Agreement can
save you money and aggravation.
The Master Protection Agreement also helps extend the life
of your new appliance. Here's what the Agreement*
includes:
Parts and labor needed to help keep products
operating properly under normal use, not just defects.
Our coverages goes well beyond the product war-
ranty. No deductibles, no functional failure excluded
from coverage - real protection.
Expert service by a force of more than 10,000 autho-
rized Sears service techinicians, which means
someone you can trust will be working on your product.
Unlimited service and nationwide service, as often as
you want us, whenever you want us.
“No-lemon” guarantee – replacement of your covered
product if Four or more product failures occur within
twelve months
Product replacement if your covered product can't be
fixed
Annual Preventive Maintenance Check at your
request - no extra charge
Fast help by phone – we call it Rapid Resolution -
phone support from a Sears representative on all
products. Think of us as a "talking owner's manual"
Power surge protection against electrical
damage due to power fluctuations
$250 Food Loss Protection annually for any food
spoilage that is the result of mechanical failure of any
covered refrigerator or freezer.
Rental reimbursement if repair of your covered
product takes longer than promised
10% discount off the regular price of any non-covered
repair service and related installed parts.
Once you purchase the Agreement, a simple phone call is
all that it takes for you to schedule service. You can call
anytime day or night, or schedule a service
appointment online.
The Master Protection Agreement is a risk free purchase. If
you cancel for any reason during the product warranty
period, we will provide a full refund. Or, a prorated refund
anytime after the product warranty period expires. Pur-
chase your Master Protection Agreement today!
Some limitations and exclusions apply. For prices and
additional information call 1-800-827-6655.
*Coverage in Canada varies on some items. For full
details call Sears Canada at 1-800-361-6665.
Sears Installation Service
For Sears professional installation
of home appliances,
garage door openers, water heaters, and major home
items, in the U.S.A. call 1-800-4-MY-HOME
®
.
3
ENGLISHENGLISH
ENGLISHENGLISH
ENGLISH
KenmorKenmor
KenmorKenmor
Kenmor
e Appliance We Appliance W
e Appliance We Appliance W
e Appliance W
arrantyarranty
arrantyarranty
arranty
One Year Limited Warranty
When installed, operated and maintained according to
all instructions supplied with the product, if this
appliance fails due to a defect in material or
workmanship within one year from the date of purchase,
call 1-800-4-MY-HOME® to arrange for free repair. If this
appliance is used for other than private family purposes,
this warranty applies for only 90 days from the date of
purchase.
This warranty covers only defects in material and
workmanship. Sears will NOT pay for:
1. Expendable items that can wear out from normal use,
including but not limited to filters, belts, light bulbs, and
bags.
2. A service technician to instruct the user in correct
product installation, operation or maintenance.
3. A service technician to clean or maintain this product.
4. Damage to or failure of this product if it is not
installed, operated or maintained according to all
instructions supplied with the product.
5. Damage to or failure of this product resulting from
accident, abuse, misuse or use for other than its
intended purpose.
6. Damage to or failure of this product caused by the
use of detergents, cleaners, chemicals or utensils other
than those recommended in all instructions supplied
with the product.
7. Damage to or failure of parts or systems resulting
from unauthorized modifications made to this product.
Disclaimer of implied warranties; limitations of
remedies
Customer’s sole and exclusive remedy under this limited
warranty shall be product repair as providedherein.
Implied warranties, including warranties of
merchantability or fitness for a particular purpose, are
limited to one year or the shortest period allowed by law.
Sears shall not be liable for incidental or consequential
damages. Some states and provinces do not allow the
exclusion or limitation of incidental or consequential
damages, or limitations on the duration of implied
warranties of merchantability or fitness, so these
exclusions or limitations may not apply to you.
This warranty applies only while this appliance is used in
the United States and Canada.
This warranty gives you specific legal rights, and you
may also have other rights which vary from state to state.
Sears, Roebuck and Co.,
Dept. 817WA, Hoffman Estates, IL 60179
Sears Canada Inc.
Toronto, Ontario, Canada M5B 2B8
In the space below, record your complete model number,
serial number and purchase date. You can find this
information on the model and serial number label,
located as shown in the Dishwasher Features section of
this book. Have this information available to help you
quickly obtain assistance or service when you contact
Sears concerning your appliance.
Model Number: 587.
Serial Number:
Purchase Date:
Save these instructions and your sales receipt for
future reference.
4
Dishwasher SafetyDishwasher Safety
Dishwasher SafetyDishwasher Safety
Dishwasher Safety
SAVE THESE INSTRUCTIONS
n If the dishwasher drains into a food disposer,
make sure disposer is completely empty before
running dishwasher.
n Disconnect electrical power to dishwasher before
servicing.
n Do not tamper with controls.
n Do not let children abuse, sit, stand or play on
door or racks of a dishwasher.
n Keep young children and infants away from
dishwasher when it is operating.
n Under certain conditions, hydrogen gas may be
produced in a hot water system that has not been
used for two weeks or more. HYDROGEN GAS
IS EXPLOSIVE. If the hot water system has not
been used for such a period, before using the
dishwasher turn on all hot water faucets and let
the water flow from each for several minutes. This
will release any accumulated hydrogen gas. As
the gas is flammable, do not smoke or use an
open flame during this time.
n To avoid entrapment and/or suffocation, remove
door or door latch mechanism from any
dishwasher that is discarded or not in use.
WARNING: When using the dishwasher, follow basic precautions, including the following:
IMPORTANT SAFETY INSTRUCTIONS
n Read all instructions before using the dishwasher.
n Use your dishwasher only as instructed in this
Use and Care Guide.
n Use only detergents or rinse agents recommended
for use in a dishwasher, and keep them out of the
reach of children.
n When loading items to be washed:
- Locate sharp items and knives so that they
are not likely to damage the door seal or
tub.
- Load sharp items and knives with the
handles up to reduce the risk of cut-type
injuries.
n Do not wash plastic items unless marked
“dishwasher safe” or the equivalent. Check with
manufacturer for recommendations, if not marked.
Items that are not dishwasher safe may melt and
create a potential fire hazard.
n Do not touch the heating element during or
immediately after use.
n Do not operate your dishwasher unless all
enclosure panels are properly in place.
Your safety and the safety of others are very important.
We have provided many important safety messages in the manual and on your appliance. Always read and obey all
safety messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word “DANGER” or
“WARNING.” These words mean:
You can be killed or seriously injured if you don't
immediately follow instructions.
You can be killed or seriously injured if you don't follow
instructions.
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you
what can happen if the instructions are not followed.
ENGLISHENGLISH
ENGLISHENGLISH
ENGLISH
5
Electrical Shock Hazard
Electrically ground dishwasher.
Connect ground wire to green ground nut in
terminal box.
Do not use an extension cord.
Failure to do so can result in death, fire, or
electrical shock.
Do not use dishwasher until completely
installed.
Do not push down on open door.
Doing so can result in serious injury or cuts.
Tip Over Hazard
n For a grounded, cord-connected dishwasher:
The dishwasher must be grounded. In the event
of a malfunction or breakdown, grounding will
reduce the risk of electric shock by providing a
path of least resistance for electric current. The
dishwasher is equipped with a cord having an
equipment-grounding conductor and a grounding
plug. The plug must be plugged into an
appropriate outlet that is installed and grounded
in accordance with all local codes and
ordinances.
WARNING: Improper connection of the
equipment-grounding conductor can result in a
risk of electric shock. Check with a qualified
electrician or service representative if you are in
doubt whether the dishwasher is properly
grounded. Do not modify the plug provided with
the dishwasher. If it will not fit the outlet, have a
proper outlet installed by a qualified electrician.
n For a permanently connected dishwasher:
The dishwasher must be connected to a
grounded metal, permanent wiring system, or a
equipment-grounding conductor must be run with
the circuit conductors and connected to the
equipment-grounding terminal or lead on the
dishwasher.
SAVE THESE INSTRUCTIONS
GROUNDING INSTRUCTIONS
BeforBefor
BeforBefor
Befor
e Using Ye Using Y
e Using Ye Using Y
e Using Y
our Dishwasherour Dishwasher
our Dishwasherour Dishwasher
our Dishwasher
ENGLISHENGLISH
ENGLISHENGLISH
ENGLISH
6
Heating Element
Glass Trap
Self-Cleaning Filter
Rinse Aid
Dispenser
Funnel
Nozzle
Tub Gasket
Middle Spray Arm
Lower Spray Arm
Overfill Protector
Detergent Dispenser
Vent
Top Rack
Serial Label
(located on right
side of tub)
Bottom Rack
ENGLISHENGLISH
ENGLISHENGLISH
ENGLISH
Dishwasher FeaturesDishwasher Features
Dishwasher FeaturesDishwasher Features
Dishwasher Features
Silverware Basket
7
ENGLISHENGLISH
ENGLISHENGLISH
ENGLISH
Status Indicator Lights
The WASHING light comes on at the beginning of cycle
and remains on until the end of the final rinse.
The DRYING light indicates the drying portion of the
cycle. The light will come on when either drying option is
selected.
The CLEAN light will come on at end of cycle and
remain on until door is opened.
Getting Started
1. Load dishwasher (See Preparing and
Loading Dishes).
2. Add detergent (See Dishwasher
Dispenser & Detergents).
3. Add rinse aid, if needed (See Rinse Aid).
4. Select desired CYCLE (See Cycle Chart).
5. Select desired OPTIONS (See Option
Selections). The indicator will glow when
selected.
6. If using WASH DELAY, follow DELAY
START instructions on page 9.
7. Run hot water faucet nearest dishwasher
until water is hot. Turn water off.
8. To start, press START/CANCEL pad.
Wash System
Your Kenmore dishwasher filters 100% of the water
for optimum cleaning. The wash system uses
alternating arms to save water and energy and
includes a heavy-duty stainless steel food disposer
that grinds up large food particles.
How the wash system works
1. Load the dishwasher (See Preparing and Loading
Dishes).
2. Hot water enters the dishwasher, covers the filter,
and rises to the bottom of the heater clips.
3. Detergent is dispensed at the appropriate time and
mixed with the hot water. This mixture is pumped
through the lower spray arm and sprays against the
soiled surfaces of the dishes to remove food
particles.
4. Water passes through the fine mesh primary filter
where food soil is removed and the clean water is
then recirculated.
5. Ports under the lower wash arm direct the food soil
through a secondary filter into a collection chamber.
6. Food soil is held in the collection chamber until it is
flushed away during the drain cycle.
7. Clean, hot water enters the dishwasher and the
sequence is repeated.
8. Beginning with the third water fill, the wash action
switches between the lower spray arm and middle
spray arm in 90 second intervals. You may notice a
change in sound as the wash action pauses and
switches to the other arm.
9. The dishwasher may pause during the cycle while
water is being heated. Wash action will continue
during this time.
10. Rinse aid is automatically dispensed in the final
rinse to aid in drying.
Operating Instructions
8
Operating Instructions Operating Instructions
Operating Instructions Operating Instructions
Operating Instructions
(continued)(continued)
(continued)(continued)
(continued)
ENGLISHENGLISH
ENGLISHENGLISH
ENGLISH
gal.
liters
2 1/2 hrs.9.3
35.3
For heavily soiled dishes
and silverware.
Heavy
Wash
• Select HEAVY WASH.
• Select desired OPTIONS.
Wash Cycle Selections
Note: Cycle times are approximate and will vary with options selected. Not all cycles available on all models.
4 washes
4 rinses
• DO NOT USE detergent.
• Select QUICK RINSE.
• Select HEAT DRY OFF.
• Select LIGHT WASH.
• Select desired options.
gal.
liters
2 wash
2 rinses
1 1/2 hrs.4.8
18.3
For lightly soiled or pre-
rinsed dishes and
silverware.
For rinsing dishes that will
be washed later.
2 rinse1/4 hrs.
gal.
liters
2.4
9.1
* Includes dry time.
Cycle Chart
Description Time*
(approx.)
Washes/
Rinses
Water
(approx.)
To Select CycleCycle
Light
Wash
Quick
Rinse
gal.
liters
3 washes
1 rinses
1 3/4 hrs.4.9
18.4
For regularly soiled dishes
and silverware.
Normal
Wash
• Select NORMAL WASH.
• Select desired options.
Hi
Temp
Heat
Dry
Heavy
Wash
Normal
Wash
Light
Wash
Quick
Rinse
CYCLES
OPTIONS
Washing
Drying
Clean
2 4 6
Delay
Hours
hold
3 sec
START
STOP
Vent
Latch
Appearance may vary from your model.
9
ENGLISHENGLISH
ENGLISHENGLISH
ENGLISH
Hi Temp Wash Option
When HI TEMP WASH option is selected, the
dishwasher heats the water in the main wash to
approximately 140°F (60°C). Wash action will continue
but timer will not advance until proper temperature is
reached. The hotter water provided by this option helps
activate dishwasher detergent to clean food grease and
soil from dishes. HI TEMP WASH option can be used
with any cycle except QUICK RINSE.
When HI TEMP WASH option is selected, the light
above the pad will come on and remain on until end of
cycle. To turn off the HI TEMP WASH option, press the
pad a second time. The light above the pad will turn off.
To turn off the HI TEMP option, press the pad a second
time. The light above the pad will turn off.
Heat Dry Option
The HEAT DRY option in combination with rinse aid will
give you excellent drying results. The energy to use
HEAT DRY costs pennies per cycle. You may turn off
the HEAT DRY option, however you will have items in
your dish load that will not be dry at the end of the
cycle.
With either option, you may see water vapor coming
from vent during the drying portion of the cycle. Some
models have a vent that is closed during washing to hold
moisture and sound inside and then opens for drying.
To turn off the HEAT DRY option, press the pad a
second time. The light above the pad will turn off.
The drying option may be changed at any time during
the cycle and affects only the drying period.
Operating Instructions Operating Instructions
Operating Instructions Operating Instructions
Operating Instructions
(continued)(continued)
(continued)(continued)
(continued)
Delay Start
The DELAY START option allows you to automatically
delay starting your dishwasher from 2-4-6 hours.
On models with 2-4-6 hour delay, press the pad once for
a 2 hour delay, twice for 4 hours and three times for 6
hours. A light will come on indicating the delay start
hours and will remain on until cycle starts.
To cancel the DELAY START option and begin the cycle
before the delay period is over, press the START/
CANCEL pad.
To Cancel a Cycle
You can cancel a cycle anytime during the cycle. Press
START/CANCEL pad and the dishwasher will start a 90
second drain. At the end of the drain, select the desired
cycle.
Option Selections
Child Lock Controls
To prevent children from accidently changing the
dishwasher cycle or starting the dishwasher, lock the
dishwasher controls by pressing and releasing the
HEAT DRY pad for 3 seconds while the door is latched.
An indicator light on the lock graphic pad will illuminate
when the controls are locked and no new selections can
be made until the lock is released. To unlock the
controls, press the HEAT DRY pad until the indicator
light goes out.
10
Loading the Top Rack
Features and appearance of racks and silverware basket
may vary from your model.
Important: Do not cover the funnel when loading.
The top rack is designed for flexibility in loading a wide
variety of items including cups, glasses, stemware,
small plates, bowls, etc.
Load glasses in top rack. Damage may occur if placed
in bottom rack.
Load plastic items in top rack only. Melting may occur if
placed in bottom rack.
Load items with open ends facing down for better
cleaning and draining.
Damage may occur if delicate items touch each other
during dishwasher operation.
Long-handled knives and utensils can be placed in top
rack.
Be sure nothing protrudes through the bottom of the rack
to block rotation of middle spray arm.
Preparing and Loading DishesPreparing and Loading Dishes
Preparing and Loading DishesPreparing and Loading Dishes
Preparing and Loading Dishes
ENGLISHENGLISH
ENGLISHENGLISH
ENGLISH
Some models have a fold-down cup shelf or a cup shelf/
stemware holder. They can be used to load two levels of
cups, juice glasses, and other short items. Stagger
items on upper level so that water can reach all inside
surfaces. Fold up to load tall glasses.
Do not cover funnel
Dish Preparation
Scrape away large pieces of food, bones, pits,
toothpicks, etc. The continuous filtered wash system will
remove remaining food particles. Burned-on foods should
be loosened before loading. Empty liquids from glasses
and cups.
Foods such as mustard, mayonnaise, vinegar, lemon
juice and tomato based products may cause
discoloration of stainless steel and plastics if allowed to
sit for a long period of time. Unless the dishwasher is to
be operated at once, it is best to rinse off these food
soils.
Load racks so
that large items
do not
prevent the
detergent
dispenser
from opening.
Check
manufacturer's
recommendations
before washing
items in question.
If the dishwasher drains
into a food disposer, be sure disposer is
completely empty before starting dishwasher.
11
Loading the Bottom Rack
Features and appearance of racks and silverware basket
may vary from your model.
The bottom rack is best for plates, saucers, bowls, and
cookware. Large items should be placed along the edge
so they do not block the spray arm rotation. For best
results, place bowls, casseroles, and sauce pans with
soiled surface facing down or toward the center. Tilt
slightly for better drainage.
Make sure tall items do not block spray arm rotation.
Be sure pan handles do not protrude through the bottom
of the rack and block the spray arm rotation.
10 place setting
10 place setting
Preparing and Loading Dishes Preparing and Loading Dishes
Preparing and Loading Dishes Preparing and Loading Dishes
Preparing and Loading Dishes
(continued)(continued)
(continued)(continued)
(continued)
ENGLISHENGLISH
ENGLISHENGLISH
ENGLISH
12 place setting
12 place setting
12
ENGLISHENGLISH
ENGLISHENGLISH
ENGLISH
Loading the Silverware Basket
Adding a Dish
To add or remove items after wash cycle starts:
Unlatch door and wait a few seconds until wash
action stops before opening.
Add the item and wait a few seconds to allow cold air
to slowly expand inside dishwasher.
Close door firmly to latch and resume cycle.
When covers are up, mix items in each section of the
basket with some pointing up and some down to avoid
nesting. Water spray cannot reach nested items.
Cut Injury
Load sharp items (knives, skewers, etc.) pointing
down.
Failure to do so may result in injury.
Load the silverware basket while it is in the bottom rack
or take the basket out for loading on a counter or table.
Place small items like baby bottle caps, jar lids, corn
cob holders, etc., in a covered section. Close the cover
to hold small items in place.
Features and appearance of racks and silverware basket
may vary from your model.
Use suggested loading patterns, as shown, to increase
washability of your silverware.
Be sure nothing protrudes through bottom of basket or
rack to block the spray arm.
Do not mix silver and stainless to avoid damaging the
silver finish.
The silverware basket can be separated and placed in
several locations in the bottom rack. Load silverware in
all sections or just one, depending on your load.
Preparing and Loading Dishes Preparing and Loading Dishes
Preparing and Loading Dishes Preparing and Loading Dishes
Preparing and Loading Dishes
(continued)(continued)
(continued)(continued)
(continued)
13
Filling the Detergent Dispenser
The detergent dispenser has one main wash cup and one
prewash cup. The covered cup opens automatically to
release detergent.
Use only fresh automatic dishwashing detergent.
Other detergents will cause oversudsing.
When using automatic dishwashing detergent tabs,
place one tab in main wash cup and close.
Add detergent just before starting cycle.
Store detergent in a cool, dry location. Moist or caked
detergent will not dissolve properly.
Heavy Wash
or
Normal Wash
How much Detergent to use
The amount of detergent to use depends on the water
hardness. Water hardness is measured in grains per
gallon. Using too little detergent can result in poor cleaning
and hard water filming or spotting. Using too much
detergent in soft water can cause a permanent film called
etching. Your local water company, water softener
company or county extension agent can tell you the water
hardness in your area.
Detergent Usage Guide
Cycle Soft Water
(0-3 grains)
Medium Hard Water
(4-8 grains)
Hard Water
(9-12 grains)
Very Hard Water*
(over 12 grains)
2 teaspoons
(each cup–
1/4 full)
5 teaspoons
(each cup–fill to line
above "Regular")
8 teaspoons
(each cup–
completely full)
Each Cup–
Completely Full
(water softener
recommended)
Light Wash
2 teaspoons
(Main Wash cup–
1/4 full)
5 teaspoons
(Main Wash cup–fill to
line above "Regular")
8 teaspoons
(Main Wash cup–
completely full)
Main Wash Cup–
Completely Full
(water softener
recommended)
Quick Rinse
No Detergent No Detergent
No Detergent No Detergent
(water softener
recommended)
*Note: For very hard water, detergent alone may not be enough. A water softener is recommended to improve water quality
and dishwashing performance. Try adding more detergent at the beginning of the main wash portion of the cycle. As a rule,
use 1 teaspoon for each grain above 12. Unlatch the door, open slowly and add detergent to the bottom of the tub. Close the
door to latch and the dishwasher will continue through the cycle.
Note: If the cover is closed on the Main Wash Cup,
open by pressing the cover latch.
Dishwasher Dispenser & DetergentsDishwasher Dispenser & Detergents
Dishwasher Dispenser & DetergentsDishwasher Dispenser & Detergents
Dishwasher Dispenser & Detergents
The use of industrial grade detergent can
damage the heating coil and other parts of the
dishwasher leading to damage to the unit and
surrounding property. Use only household grade
automatic dishwasher detergents.
Cover
Main Wash Cup
Pre Wash Cup
Cover Latch
14
Rinse Aid
Rinse aid greatly improves drying and reduces
water spots and filming. Water "sheets" off dishes
rather than forming water droplets that cling and leave
spots.
A dispenser, located next to the detergent cup,
automatically releases a measured amount of rinse aid
during the last rinse. If spotting and poor drying are
problems, increase the amount of rinse aid dispensed
by rotating the dial to a higher number. The dial is
located under the dispenser cap. The indicator will be
dark when full and will show clear when it is time to refill.
To add liquid rinse aid, turn dispenser cap 1/4 turn
counterclockwise and lift out. Pour in rinse aid until
liquid touches the indicated fill level. Replace cap.
Do not overfill since this can cause oversudsing. Wipe
up any spills with a damp cloth.
The dispenser holds enough for 35 to 140 washes,
depending on setting.
Adjustable setting
Water Pressure
The hot water line to dishwasher must provide water
pressure between 20 and 120 psi.
Low water pressure may occur when laundry or showers
are in operation. Wait until water use is reduced before
starting dishwasher.
Water Temperature
Hot water is needed for best dishwashing and drying
results. Water entering dishwasher should be 120°F
(49°C) to give satisfactory results.
To check water temperature entering dishwasher:
Turn on hot water faucet nearest dishwasher for
several minutes to clear cool water from pipes.
Hold a candy or meat thermometer in stream
of water to check the temperature.
If temperature is below 120°F (49°C), have a qualified
person raise the hot water heater thermostat setting.
Important: Before starting a cycle, run hot water
to clear cool water from pipe.
Dispenser Opening
Dispenser Cap
Indicator
Dishwasher DispenserDishwasher Dispenser
Dishwasher DispenserDishwasher Dispenser
Dishwasher Dispenser
& Detergents & Detergents
& Detergents & Detergents
& Detergents
(continued)(continued)
(continued)(continued)
(continued)
Factors AffectingFactors Affecting
Factors AffectingFactors Affecting
Factors Affecting
PerformancePerformance
PerformancePerformance
Performance
ENGLISHENGLISH
ENGLISHENGLISH
ENGLISH
The HEAT DRY option in combination with rinse aid
will give you excellent drying results. The energy
to use HEAT DRY costs pennies per cycle. You may
turn off the HEAT DRY option, however you will
have items in your dish load that will not be dry at
the end of the cycle.
MoreLess
15
Overfill Protectorkeeps dishwasher from
overfilling and is located in the left front corner of the tub.
• Clean occasionally with household cleaner containing
vinegar or bleach to
dissolve any buildup.
• Overfill Protector should
move up and down freely
about one inch. If it does
not move, lift and clean
underneath.
Care of Drain Air Gap
If a drain air gap was installed for your built-in
dishwasher, check to make sure it is clean so the
dishwasher will drain properly. A drain air gap is usually
mounted on countertop and can be inspected by
removing the cover. This is not part of your dishwasher
and is not covered by warranty.
Note: Hard water may cause lime deposit buildup on the
interior of the dishwasher. For cleaning instructions see
“Removing Spots and Film” section.
OutsideOccasionally wipe with a mild nonabrasive
detergent and water. Rinse and dry.
InsideThe inside of the dishwasher is self-cleaning
with normal use. If needed, clean around the tub gasket
area with a damp cloth.
The filter is self-cleaning. A glass trap located in the
center of the filter is designed to collect pieces of broken
glass, straws, bones and pits. To remove items in glass
trap, grasp handle, lift out, empty and replace.
Winterizing
A dishwasher left in an unheated place should be
protected from freezing. Have a qualified person do
the following:
To Disconnect Service:
1. Turn off electrical power to the dishwasher at the
supply source by removing fuses or tripping circuit
breaker.
2. Shut off water supply.
3. Place a pan under the inlet valve. Disconnect water
line from inlet valve and drain into pan.
4. Disconnect drain line from pump and drain water into
pan.
Note: See Installation Instructions for more details.
To Restore Service:
1. Reconnect the water, drain and electrical power
supply.
2. Turn on water and electrical power supply.
3. Fill both detergent cups and run dishwasher through
a NORMAL cycle.
4. Check connections to make sure they do not leak.
Note: See Installation Instructions for more details.
Property Damage Hazard
Freezing temperatures may cause water lines to
rupture. Be sure all supply lines to and circulating
lines within dishwasher are protected.
Failure to do so could result in property damage.
Allow heating element to cool before
cleaning the interior.
Failure to do so can result in burns.
Burn Hazard
Care and CleaningCare and Cleaning
Care and CleaningCare and Cleaning
Care and Cleaning
ENGLISHENGLISH
ENGLISHENGLISH
ENGLISH
16
Dishware Chipped
Load with care and do not overload. (See Preparing
and Loading Dishes.)
Place delicate items in top rack.
Place glasses securely against pins and not over
pins.
Load items so they are secure and don’t jar loose
when moving racks in and out. Move racks in and out
slowly.
Make sure tall glasses and stemware will clear top of
tub when rack is pushed in.
Fine antique china and crystal should be hand-
washed.
Dishware Stained or Discolored
Tea and coffee can stain cups. Remove the stains by
hand washing in a solution of 1/2 cup (120 ml) bleach
and one quart (1 L) of warm water. Rinse thoroughly.
Iron deposits in water can cause a yellow or brown
film. A special filter installed in the water supply line
will correct this problem. (See Removing Spots and
Film.)
Aluminum utensils can leave gray/black marks when
they rub against other items. Load properly.
Certain high acid foods can cause discoloration of
stainless steel and plastics if allowed to sit for a long
period. Use the QUICK RINSE cycle or rinse by hand
if not operating dishwasher at once.
Mixing stainless steel and silver utensils in silverware
basket can cause pitting of the stainless steel
blades. Avoid mixing stainless steel and silver.
Etching
Using too much detergent in soft or softened water
causes this film that cannot be removed.
Adjust the amount of detergent based on the water
hardness. (Check Detergent Usage Guide.)
Lower the water temperature.
Detergent Left in Cups
Detergent may be old. Discard and use fresh
detergent.
Be sure water action can reach the dispenser.
Check to see if cycle has been completed.
Make sure items do not prevent the detergent
dispenser from opening.
Before calling for service, review this list. It may
save you both time and expense. This list includes
common experiences that are not the result of
defective workmanship or material in your
dishwasher.
Food Soils Left on Dishes
Choose another cycle for longer washing time.
Check rack loading section for proper loading—avoid
nesting items.
Home water pressure may be too low—should be 20
to 120 pounds per square inch (psi).
Check incoming water temperature. It should be
120°F (49°C). (See Factors Affecting Performance.)
Check water hardness. For extremely hard water, it
may be necessary to install a water softener. (See
Detergent Chart.)
Use fresh detergent.
Check to make sure funnel in top rack is not blocked.
Make sure items are not blocking the spray arms,
preventing them from rotating.
Dishes not Dry
Select HEAT DRY option.
Make sure the rinse aid dispenser is filled.
Increase the amount of rinse aid. (See Rinse Aid.)
Check the incoming water temperature. It should be
120°F (49°C).
Check for proper loading—avoid nesting items.
Plastic items may need to be towel dried.
Cups with a concave bottom will collect water.
Glassware/Flatware Spotted or
Cloudy
Check water hardness. For extremely hard water, it
may be necessary to install a water softener. (See
Dishwasher Dispenser & Detergents.)
Water temperature may be low. Avoid extremely low
or high temperatures. (See Factors Affecting
Performance.)
Avoid overloading and improper loading. (See
Preparing and Loading Dishes.)
Use fresh detergent. Old detergent is ineffective.
Make sure rinse aid dispenser is filled.
Check to see that proper amount of detergent is
being used for cycle selected. Also, check phosphate
level. (See Detergent Usage Guide.)
Home water pressure may be too low—it should be
20 to 120 pounds per square inch (psi).
Solutions to Common Dishwashing Problems
ENGLISHENGLISH
ENGLISHENGLISH
ENGLISH
17
Cycle Takes a Long Time
Is cycle in a water heating delay?
Check incoming water temperature. It should be
120°F (49°C).
Has the delay start option been selected?
Dishwasher Won’t Fill
Is water supply turned on?
Does overfill protector move up and down freely? (See
Overfill Protector section.)
The normal full water level of the dishwasher will only
reach the bottom of the heater clips.
Dishwasher Has an Odor
Soiled dishes left in dishwasher too long can create
an odor. Use the QUICK RINSE cycle.
There will be a “new” smell when first installed. This
is normal.
Check to see if unit is draining properly. (See
Dishwasher Does Not Drain Properly.)
Stains on Tub Interior
Washing large amounts of dishware with tomato
based soil can cause a pink/orange appearance. This
will not affect performance and will gradually fade over
time. Pre-rinsing or using the QUICK RINSE cycle
will reduce the chance of staining. Using the heat dry
off option will lessen staining.
Dishwasher Leaks
Use only fresh detergent designed for automatic
dishwashers. Measure detergent carefully. Try a
different brand.
Spilled rinse aid can cause foam and lead to
overflowing. Wipe up any spills with a damp cloth.
Check to see that dishwasher is level.
(See Installation Instructions.)
Normal Sounds You Will Hear
Normal sounds include water fill, water circulation
and motor sounds.
There is a noticeable change in sound when the wash
action switches between the lower and middle spray
arm. This is normal since each spray arm has its own
sound.
It is normal for dishwasher to pause (no sound) when
the wash action is switching between the lower and
middle spray arms.
Water in Bottom of Tub
Water left in bottom of tub after cycle is complete is
not normal. If water remains in the bottom of the tub,
dishwasher may not be draining properly. (See
Dishwasher Does Not Drain Properly.)
Vapor at Vent
Water vapor escapes from the vent during the drying
part of cycle. This is normal.
Dishwasher Won’t Start
Check to see if circuit breaker is tripped or if a fuse is
blown.
Make sure water supply is turned on.
Check to see if cycle is set correctly.
(See Operating Instructions.)
Is dishwasher set for delay start option?
Make sure door is closed and latched.
ENGLISHENGLISH
ENGLISHENGLISH
ENGLISH
Solutions to Common Dishwashing Problems
(continued)
Removing Spots and Film
Hard water can cause lime deposit buildup on the
interior of the dishwasher. Dishes and glasses may also
get spots and film for a number of reasons. (See
Glassware/Flatware Spotted or Cloudy section.) To
remove buildup, spots and film, clean using the following
instructions:
1. Load clean dishes and glasses in normal manner.
Do not load any metal utensils or silverware.
2. Do not add detergent.
3. Select the HEAVY WASH cycle. Close and latch
door.
4. Allow dishwasher to run for 20 minutes to reach the
main wash portion of cycle.
5. Unlatch and open door and pour 2 cups
of white vinegar into the bottom of dishwasher.
6. Close and latch door and allow cycle to finish.
Note: If these conditions persist, a home water softener
should be considered.
Dishwasher Does Not Drain
Properly
If unit is hooked up to a food waste disposer, make
sure the disposer is empty.
Check to see if the knockout plug has been removed
from inside the food waste disposer inlet.
Check to see if drain hose is kinked.
Make sure cycle is complete, not in a pause.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36

Kenmore 587.1523 User manual

Category
Dishwashers
Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages