INSTRUCTIONS

2003 by National Presto Industries, Inc.

Visit us on the web at www.GoPresto.com

4-in-One Electronic

Clock/Timer

1



Four functions in one compact unit: timer, stopwatch, cal-

endar, and clock.

Calendar displays day and date to the year 2099.

Insert Battery Before Using:

Remove the battery compartment cover on the back of the unit (Fig. 1) by plac-

ing your fingernail in the groove at the top right corner of the cover and pull the

cover off. Insert one AAA battery into compartment matching the + and - symbols as

indicated in the battery compartment. Slide cover down over battery, making sure it locks

To Set Calendar/Clock:

The CLOCK button is used to alternate between 12 hour (AM/PM) and 24 hour (International/

Military time) clock modes. When you insert the battery, the clock will automatically be in

To Use Stopwatch: (Times up to 23 hours, 59 minutes, 59 seconds)

Press the STOP WATCH button to enter the count-up/stopwatch mode. Press the START/STOP button to begin counting up in seconds.

Press START/STOP again to stop time. Press again to restart. After you stop the time, press the ∇ and ∆ buttons at the same time to

clear the time and reset to 00:00.

To Use THE BASIC Timer (TIMER 1):

First press the TIMER button to enter the timer mode. The number 1 will be displayed in the upper right corner of the timer. Then press

SET and using the ∇ and/or ∆ buttons, set desired timing period (hours, minutes, and seconds). Next press START/STOP to begin tim-

ing. Any time during the timing period the timer can be stopped by pressing START/STOP. Press START/STOP again to restart. Once

2

To Use MEMORY timers 2, 3, and 4:

First press TIMER to enter the timer mode. Then press the MEMORY 2-3-4 button. Each time you press MEMORY 2-3-4, a different

number will appear in the upper right corner of the timer. That number indicates which timer is being used. Press SET and using the

∇and/or ∆ buttons set desired timing period for each timer.

When you set timers 2, 3, and 4, the times will automatically be stored. To reset any of the stored times, press the ∇ and ∆ buttons at

the same time and this will erase the time in memory.

Memory Recall:

To recall a stored time after the time has expired, rst make sure you are in the timer

mode, then press MEMORY 2-3-4 until the correct timer is displayed.

If you have any questions regarding the operation of your Presto

Department weekdays between 8:00 AM and 4:30 PM (Central Time) at 715-839-2209 or write:

Presto Factory Service Dept., 555 Matthews Drive, Canton, MS 39046-0529

Appliances may also be repaired at any Presto Authorized Service Station. Check your yellow pages for Service Stations near you.

The Presto Factory Service Department and Presto Authorized Service Stations are equipped to service all PRESTO

appliances and

supply genuine PRESTO

parts. Genuine PRESTO

replacement parts are manufactured to the same exacting quality standards as

PRESTO

appliances and are engineered specically to function properly with its appliances. Presto can only guarantee the quality

and performance of genuine Presto

hold use. Presto pledges to the original owner that should there be any defects in material or workmanship during the rst

two years after purchase, we will repair or replace it at our option. Our pledge does not apply to damage caused by shipping.

To obtain service under the warranty, return this PRESTO

or to the nearest Presto Authorized Service Station. When returning a product, please include a description of the defect and

indicate the date the appliance was purchased.

We want you to obtain maximum enjoyment from using this PRESTO

appliance and ask that you read and follow the in-

structions enclosed. Failure to follow instructions, damage caused by improper replacement parts, abuse or misuse will void