VESTEL PETRA FNPC12 Service Training

Category
Dishwashers
Type
Service Training
- 1 -
SEMI-INTEGRATED FULLY-INTEGRATED
FREE-STANDING
DISHWASHERS TRAINING DOCUMENT
- 2 -
Vestel dishwashers are categorized into four series Angelo / Petra / Semi-Integrated and
Fully-Integrated.
Angelo / Petra / Semi_Integrated series have different panel versions. Fully-Integrated models
have built in adjustment mechanism and hinge spring adjustment mechanism.
A
NGELO SERIES
ANGELO classified;
FNAC11
FNPC12
FNAC13
FNAC21
FNAC31
FNAC41
They are produced 6 different versions.
PETRA SERIES
P
ETRA classified;
FNPC11
FNPC12
FNPC13
FNPC21
They are produced 4 different versions.
- 3 -
SEMI-INTEGRATED SERIES
Semı-Integrated classified;
SNSC11
SNSC13
SNSC31
SNSC41
They are produced 4 different versions.
FULLY-INTEGRATED SERIES
F
ully –Integrated classified;
INRD13
INRD21
INRD41
They are produced 3 different versions.
- 4 -
C11 C12 C13 C21 C31 C41
SNSC11 SNSC13 SNSC31 SNSC41
Models
IND13 IND21 IND41
General Features
Place-Settings Capacity 12 12 12 12 12 12
Colour White White White White White White
Programmes 2 3 4 6 7 9
Prewash - Yes Yes Yes Yes Yes
Economic 50°C Yes Yes Yes Yes Yes Yes
Normal - - - Yes Yes -
Automatic- Delicate 30-5C - - - - - Yes
Automatic Normal 50-60°C - - - - - Yes
Automatic Intensive 60-70°C - - - - - Yes
Super/Intensıve program 65°C Yes Yes Yes Yes Yes -
Extra Intensıve program70° C
(Prewash+Intensıve 65°)
- - - Yes Yes -
Hygiene 60°C - - - - - Yes
Extra Hygiene 70°C (Prewash + Hygiene 6C) - - - - - Yes
Quick program 30' 40°C - - Yes Yes Yes Yes
Delicate program 40°C - - - - Yes -
Super Program 55' 60°C - - - - - Yes
Functions
Tablet detergent - - - - - Yes
Prewash - - - Yes Yes Yes
1/2 Load - - - - Yes Yes
Indicators
Rinse-Aid Indicator - - - Yes Yes Yes
Salt Indicator - - - Yes Yes Yes
Fallowing Programme Indicator Yes Yes Yes Yes Yes Yes
Set the Time - - - Yes Yes Yes
Remaining Time Indicator - - - - - Yes
Child Lock - - - Yes Yes Yes
Baskets
Top basket height adjustment while it is full - - - - Yes Yes
Top basket height adjustment while it is empty - - - Yes - -
Lower Basket Folding Racks - - 2 pieces 4 pieces 4 pieces 4 pieces
Lower Basket Handle - - - Plastic Plastic Plastic
Upper Basket Handle - - - - - Plastic
Sensor - - - - Yes
Drying System Normal Normal Normal Normal Normal
Drying with
Fan
- 5 -
WATER AND ENERGY CONSUMPTIONS OF PROGRAMMES
FNAC11 - FNPC11- SNSC11
Program Time (min )
Water Consumption
( lt )
Energy
Consumption( kWh )
Economic 50°C 150 15,7 1,05
Intensive 65°C 110 17,2 1,55
FNAC12 - FNPC12
Program Time ( dk )
Water Consumption
( lt )
Energy
Consumption( kWh )
Prewash 15 4,5 0,02
Economic 50°C 150 15,7 1,05
Intensive 65°C 110 17,2 1,55
FNAC13 - FNPC13 - SNSC13 - INRD13
Program Time ( min )
Water Consumption
( lt )
Energy
Consumption( kWh )
Prewash 15 4,5 0,02
Quick 40°C 30 12,4 0,68
Economic 50°C 150 15,7 1,05
Intensive 65°C 110 17,2 1,55
FNAC21 - FNPC21 - INRD21
Program Time ( min )
Water Consumption
( lt )
Energy
Consumption( kWh )
Prewash 15 4,5 0,02
Quick 40°C 30 12,4 0,68
Economic 50°C 150 15,7 1,05
Normal 55°C 95 16,5 1,1
Intensive 65°C 110 17,2 1,55
FNAC21 - FNPC21 - INRD21(With Prewash Option Selected)
Program Time ( min )
Water Consumption
( lt )
Energy
Consumption( kWh )
Quick 40°C + Prewash 45 16,9 0,7
Economic 50°C+ Prewash 165 20,2 1,07
Normal 55°C + Prewash 110 21 1,12
Extra Intensive 150 25,7 1,57
FNAC31 - FNPC31 - SNSC31
Program Time ( min )
Water Consumption
( lt )
Energy
Consumption( kWh )
Prewash 15 4,2 0,02
Quick 40°C 30 10,9 0,65
Delicate 40°C 70 13,8 0,79
Economic 50°C 165 13,4 1,05
Normal 55°C 105 14,7 1,5
Intensive 65°C 110 16,4 1,55
Extra Intensive 150 20,1 1,9
- 6 -
FNAC31 - FNPC31 - SNSC31 (With Half Load Option Sele
cted)
Program Time ( min )
Water Consumption
( lt )
Energy
Consumption( kWh )
Prewash 15 4,2 0,02
Quick 40°C 30 10,9 0,72
Delicate 40°C 62 10 0,80
Economic 50°C 155 9,6 1,03
Normal 55°C 97 10,5 1,13
Intensive 65°C 88 11,8 1,27
Extra Intensive 122 15,5 1,59
FNAC41 - FNPC41 -SNSC41- INRD41
Program Time ( min )
Water Consumption
( lt )
Energy
Consumption( kWh )
Prewash 15 4,2 0,02
Automatic Delicate 30-50°C 64 - 92 10.6 - 17.7 0.60 - 0.80
Automatic Normal 50-60°C 100 - 127 10.9 - 18.5 1,03 – 1,28
Automatic Intensive 60-70°C 111 - 183 13.3 - 24.6 1.25 – 1,78
Quick 40°C 30 11 0,71
Economic 50°C 170 13,5 1,05
Super 55 min 60°C 55 11 0,93
Hygiene 60°C 119 15 1,55
Extra Hygiene 161 22,7 1,75
FNAC41 – FNPC41 -SNSC41- INRD41 (With Half Load Option Selected)
Program Time ( min )
Water Consumption
( lt )
Energy
Consumption( kWh )
Prewash 15 4,2 0,02
Automatic Delicate 30-50°C 62 – 81 9.9 - 13.7 0.79 – 0.94
Automatic Normal 50-60°C 85 - 107 10.5 - 14.3 1.1 - 1.28
Automatic Intensive 60-70°C 113 - 163 11.9 - 19.9 1.20 - 1.77
Quick 40°C 30 11 0,72
Economic 50°C 153 9,8 1,03
Super 55 min 60°C 55 11 1,07
Hygiene 60°C 95 10,5 1,25
Extra Hygiene 130 18,2 1,38
Not: The values declared above are the values obtained under laboratory conditions
according to the relevant standards.
These values can change depending on environment and product’s usage conditions.
(network tension, water input temperature and environment)
- 7 -
NAME PLATE
- 8 -
SETTING THE WATER HARDNESS
T
est strip;
The washing effectiveness of your machine depends on the softness of the tap water. For
this reason, your machine is equipped with a system that reduces the hardness in mains
water supply. The washing effectiveness will increase when the system is correctly set. To
make the system setting, use the testing strip, if it is available, and find the hardness of the
mains water supply.
- 9 -
For Free Standing and Semi- Integrated Models;
a
) Move the programme selector knob to the 0(reset) position while your machine is not in
operation.
b) Press the Start/Pause button and keep it pressed down. Meanwhile, energise the machine
by pressing the Power On/Off button.
c) Keep Start/Pause button pressed until program monitor lights are on and off.
d) After the lights have flashed, release the Start/Pause button.
Your machine displays the latest entered water hardness setting.You can adjust the
levels by pressing Start/Pause button according to the table of Water Hardness Level
Settings. You can adjust tle levels by pressing “+” and “-“ buttons placed on display in
FNAC31 and FNAC41 models.
- 10 -
C11, C12, C13
Water Hardness Level Indicators
Water
Hardness
Level
German
Hardness
dH
French
Hardness
dF
British
Hardness
dE
HARDNESS LEVEL
INDICATORS
1 0-5 0-9 0-6
2 6-11 10-20 7-14
3 12-17 21-30 15-21
4 18-22 31-40 22-28
5 23-31 41-55 29-39
6 32-50 56-90 40-63
- 11 -
C21, C31
Water Hardness Level Indicators
Water
Hardness
Level
German
Hardness
dH
French
Hardness
dF
British
Hardness
dE
HARDNESS LEVEL
INDICATORS
1 0-5 0-9 0-6
2 6-11 10-20 7-14
3 12-17 21-30 15-21
4 18-22 31-40 22-28
5 23-31 41-55 29-39
6 32-50 56-90 40-63
- 12 -
C41
Water Hardness Level Indicators
Water
Hardness
Level
German
Hardness
dH
French
Hardness
dF
British
Hardness
dE
HARDNESS LEVEL
INDICATORS
1 0-5 0-9 0-6
2 6-11 10-20 7-14
3 12-17 21-30 15-21
4 18-22 31-40 22-28
5 23-31 41-55 29-39
6 32-50 56-90 40-63
- 13 -
Fully-Integrated Models;
I
NRD 13
a) Press the Program selector button and keep it pressed down while your machine is not in
operation,
b) Meanwhile, energise the machine by pressing the On/Off button.
c) Keep Program selector button pressed until “P1– P2 – P3 – P4– End” lights are on andoff.
d) After the “P1– P2 – P3 – P4– End” have flashed, release the Program selector button.
Your machine displays the latest entered water hardness setting.
e) You can adjust the levels by pressing Program selector button according to the table of
Water Hardness Level Settings.
f)After adjusting the water hardness level, press on/off button to save settings in memory.
- 14 -
INRD 13
W
ater
Hardness
Level
German
Hardness
dH
French
Hardness
dF
British
Hardness
dE
HARDNESS LEVEL
INDICATORS
1 0-5 0-9 0-6
2 6-11 10-20 7-14
3 12-17 21-30 15-21
4 18-22 31-40 22-28
5 23-31 41-55 29-39
6 32-50 56-90 40-63
- 15 -
INRD21
a) Press the Program selector button and keep it pressed d
own while your machine is not in
operation,
b) Meanwhile, energise the machine by pressing the O
n/Off button.
c) Keep Program selector button pressed until “P1– P2 – P3 – P4– P5– 3h –6h– 9h– End”
lights are on and off.
d) After the “P1– P2 – P3 – P4– P5– 3h –6h– 9h– End” have flashed, release the Program
selector button.
Your machine displays the latest entered water hardness setting.
e) You can adjust the levels by pressing Program selector button according to the table of
Water Hardness Level Settings.
f) After adjusting the water hardness level, press on/off button to save settings in memory.
- 16 -
I
NRD21
Water
Hardness
Level
German
Hardness
dH
French
Hardness
dF
British
Hardness
dE
HARDNESS LEVEL
INDICATORS
1 0-5 0-9 0-6
2 6-11 10-20 7-14
3 12-17 21-30 15-21
4 18-22 31-40 22-28
5 23-31 41-55 29-39
6 32-50 56-90 40-63
- 17 -
I
NRD41
a) Press the Program selector button and keep it pressed down while your machine is not in
operation,
b) Meanwhile, energise the machine by pressing the On/Off button.
c) Keep Program selector button pressed until “SL” expression is on and off.
d) After the “SL” expression have flashed, release the Program selector button.
Your machine displays the latest entered water hardness setting.
e) You can adjust the levels by pressing Program selector button according to the table of
Water Hardness Level Settings.
f) After adjusting the water hardness level, press on/off button to save settings in memory..
- 18 -
INRD41
Water
H
ardness
Level
German
Hardness
dH
French
Hardness
dF
British
Hardness
dE
HARDNESS LEVEL
INDICATORS
1 0-5 0-9 0-6
2 6-11 10-20 7-14
3 12-17 21-30 15-21
4 18-22 31-40 22-28
5 23-31 41-55 29-39
6 32-50 56-90 40-63
- 19 -
Child Lock:
C21, C31 and C41 models
A
ctivate Child Lock: Press Start/Pause and Delay buttons simultaneously for 4 seconds. When
activated, 3h (washing) lamp flashes once. İn C41 model press “+” and “–” buttons on Remaining
time indicator simultaneously for 4 seconds. At this time, "CL" appears for 2 seconds on remaining
time indicator
Inactivate Child Lock: Press Start/Pause and Delay buttons simultaneously for 4 seconds. When
activated, 3h (washing) lamp flashes twice. In C41 model press “+” and “–” buttons again
simultaneously for 4 seconds. "CL" will blink for 2 times.
- 20 -
Delay Timer:
C21 and C31,
When you press delay button, 3h (washing) lamp flashes.If you continue pressing delay
button, 6h-9h-12h lamb will flash respectively for each press. If you select delay time and
press Start/Pause button, then you activate delay time.
C41
In these models you can select the delay
time by pressing “+” and “–” buttons on
display. For activating delay time press
Start /Pause button.
IND21
When you press delay button, 3h lamp flashes. If you continue pressing delay button, 6h-9h
lamb will flash . If you press delay button again ,after 9h lamb flashed , delay will reset. You
may select the delay time, after selecting the programme.
IND 41
When you press delay button,"1h" appears on program display. If you continue pressing
delay button, 1h-2h-...19h lamb will flash respectively for each pressing. You may select the
delay time, after selecting the programme. For changing or resetting delay time , adjust the
new time by pressing delay button. It will active according to the latest entered setting.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81

VESTEL PETRA FNPC12 Service Training

Category
Dishwashers
Type
Service Training

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI