Page is loading ...
Statement:
This manual is the intellectual property of Foxconn, Inc. Although the
information in this manual may be changed or modified at any time,
Foxconn does not obligate itself to inform the user of these changes.
Trademark:
All trademarks are the property of their respective owners.
Version:
User’s Manual V1.0 for P35AP-S Series motherboard.
P/N: 3A220JQ00-000-G
Symbol description:
Note: refers to important information that can help you to use motherboard
better.
Attention: indicates that it may damage hardware or cause data loss,
and tells you how to avoid such problems.
Warning: means that a potential risk of property damage or physical
injury exists.
More information:
If you want more information about our products, please visit Foxconn’s
website: http://www.foxconnchannel.com
WEEE: The use of the symbol indicates that this product may not be
treated as household waste. By ensuring this product is disposed of
correctly, you will help prevent potential negative consequences for the
environment and human health, which could otherwise be caused by
inappropriate waste handling of this product. For more detailed informa-
tion about recycling of this product, please contact your local city office,
your household waste disposal service or the shop where you pur-
chased the product.
PDF 文件使用 "pdfFactory" 试用版本创建 www.fineprint.com.cn
Declaration of conformity
HON HAI PRECISION INDUSTRY COMPANY LTD
66 , CHUNG SHAN RD., TU-CHENG INDUSTRIAL DISTRICT,
TAIPEI HSIEN, TAIWAN, R.O.C.
declares that the product
Motherboard
P35AP-S
is in conformity with
(reference to the specification under which conformity is declared in
accordance with 89/336 EEC-EMC Directive)
þ EN 55022: 1998/A2: 2003Limits and methods of measurements of radio disturbance
characteristics of information technology equipment
þ EN 61000-3-2/:2000 Electromagnetic compatibility (EMC)
Part 3: Limits
Section 2: Limits for harmonic current emissions
(equipment input current <= 16A per phase)
þ EN 61000-3-3/A1:2001 Electromagnetic compatibility (EMC)
Part 3: Limits
Section 2: Limits of voltage fluctuations and flicker in low-voltage
supply systems for equipment with rated current <= 16A
þ EN 55024/A2:2003 Information technology equipment-Immunity characteristics limits
and methods of measurement
Signature : Place / Date : TAIPEI/2007
Printed Name : James Liang Position/ Title : Assistant President
PDF 文件使用 "pdfFactory" 试用版本创建 ³ ³ www.fineprint.com.cn
Declaration of conformity
Trade Name: FOXCONN
Model Name: P35AP-S
Responsible Party: PCE Industry Inc.
Address: 458 E. Lambert Rd.
Fullerton, CA 92835
Telephone: 714-738-8868
Facsimile: 714-738-8838
Equipment Classification: FCC Class B Subassembly
Type of Product: Motherboard
Manufacturer: HON HAI PRECISION INDUSTRY
COMPANY LTD
Address: 66 , CHUNG SHAN RD., TU-CHENG
INDUSTRIAL DISTRICT, TAIPEI HSIEN,
TAIWAN, R.O.C.
Supplementary Information:
This device complies with Part 15 of the FCC Rules. Operation is subject to the follow-
ing two conditions : (1) this device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may cause
undesired operation.
Tested to comply with FCC standards.
Signature : Date : 2007
PDF 文件使用 "pdfFactory" 试用版本创建 ³ ³ www.fineprint.com.cn
Product Introduction
Main Features........................................................................................2
Layout......................................................................................................4
Rear I/O Ports.........................................................................................5
Table of Contents
Chapter
Utility CD content.................................................................................40
Install driver and utility.........................................................................41
1
Enter BIOS Setup.................................................................................18
Main menu............................................................................................18
1.Standard BIOS Features..................................................................20
2.Advanced BIOS Features.................................................................22
3.Advanced Chipset Features............................................................24
4.Integrated Peripherals.....................................................................25
5.Power Management Setup..............................................................28
6.PnP/PCI Resource Management...................................................31
7.PC Health Status..............................................................................32
8.Gladiator BIOS..................................................................................33
9.Load Fail-Safe Defaults...................................................................37
10.Load Optimized Defaults...............................................................37
11.Set Supervisor/ User Password...................................................37
12.Save & Exit Setup...........................................................................38
13.Exit Without Saving.........................................................................38
CPU.........................................................................................................7
Memory....................................................................................................9
Power Supply........................................................................................11
Other Connectors................................................................................12
Expansion Slots...................................................................................15
Jumpers...............................................................................................16
Chapter
2
Installation Instructions
Chapter
3
BIOS Description
Chapter
4
Driver CD Introduction
PDF 文件使用 "pdfFactory" 试用版本创建 www.fineprint.com.cn
Table of Contents
Directions for Bundled Software
FOX ONE..............................................................................................43
LiveUpdate...........................................................................................50
FOX LOGO............................................................................................56
FOX DMI................................................................................................57
Chapter
5
5
Appendix
CrossFire
TM
Technology......................................................................58
Multi-Graphic Card Technology..........................................................60
PDF 文件使用 "pdfFactory" 试用版本创建 www.fineprint.com.cn
1.Attach the CPU and heatsink using silica gel to ensure full contact.
2.It is suggested to select high-quality, certified fans in order to avoid
damage to the motherboard and CPU due to high temperatures.
3.Never turn on the machine if the CPU fan is not properly installed.
4.Ensure that the DC power supply is turned off before inserting or
removing expansion cards or other peripherals, especially when
you insert or remove a memory module. Failure to switch off the DC
power supply may result in serious damage to your system or
memory module.
Attention:
We cannot guarantee that your system will operate normally while
over-clocked. Normal operation depends on the over-clock capacity
of your device.
Since BIOS programs are upgraded from time to time, the BIOS
description in this manual is just for reference. We do not guarantee
that the content of this manual will remain consistent with the actual
BIOS version at any given time in the future.
Attention:
The pictures of objects used in this manual are just for your reference.
Please refer to the physical motherboard.
Attention:
Attention:
Please visit the Foxconn global English website (http://www.
foxconnchannel.com) to download the latest BIOS file and drivers
for this motherboard.
Attention:
PDF 文件使用 "pdfFactory" 试用版本创建 www.fineprint.com.cn
Chapter
Thank you for buying Foxconn’s P35AP-S Series motherboard.
This series of motherboard is one of our new products, and
offers superior performance, reliability and quality, at a reason-
able price. This motherboard adopts the advanced Intel
®
P35 +
ICH9R chipset, providing a computer platform with high
integration, powerful compatibility and high performance-price
ratio for users.
This chapter includes the following information:
v Main Features
v Layout
v Rear I/O Ports
1
1
PDF 文件使用 "pdfFactory" 试用版本创建 × ÿ × www.fineprint.com.cn
Chapter 1 Product Introduction
2
Main Features
Size
· ATX form factor of 12 inch x 9.6 inch
Microprocessor
· Supports Intel
®
Core
TM
2 Quad,Core
TM
2 Extreme,Core
TM
2 Duo,Pentium
®
Dual-
Core E2xxx,Celeron
®
4xx processors in an LGA775 package
· Supports FSB at 1333 MHz/1066 MHz/800 MHz
· Supports Hyper-Threading technology
Chipset
· Intel
®
P35 (North Bridge) + ICH9R (South Bridge)
System Memory
· Four 240-pin DIMM slots for DDR2 and two 240-pin DIMM slots for DDR3
· Supports Dual-Channel DDR2 1066(OC)/800/667
· Supports Dual-Channel DDR3 1333(OC)/1066/800
· Supports up to 8GB DDR2 memory and 4GB DDR3 memory
USB 2.0 Ports
· Supports hot plug
·Supports up to eight USB 2.0 ports (4 rear panel ports, 2 onboard USB
headers providing 4 extra ports)
·Supports USB 2.0 protocol up to 480Mb/s transmission rate
Onboard Serial ATA II
· Six Serial ATA II connectors and two external Serial ATA II ports
·300MB/s data transfer rate
· Supports hot plug and NCQ (Native Command Queuing )
· Supports RAID 0,RAID 1,RAID 5,RAID 10
· Supports Intel
®
Matrix Storage Technology
Onboard LAN
· One LAN interface built-in onboard
·Supports 10/100/1000 Mb/s Ethernet
PDF 文件使用 "pdfFactory" 试用版本创建 Æ Æ www.fineprint.com.cn
3
Chapter 1 Product Introduction
Onboard 1394a
·Supports hot plug
·With rate of transmission at 400 Mb/s
·Connect with 2 independent 1394 units synchronously at most(one on
board; the other on Rear I/O)
Onboard Audio
· Supports S/PDIF output
· Supports Jack-Sensing function
· Supports Intel
®
High Definition Audio
Expansion Slots
· Three PCI slots
· Two PCI Express x1 slots
· Two PCI Express x16 Graphics slots
PCI Express x1 Support
· Supports 250 MB/s (500 MB/s concurrent) bandwidth
· Low power consumption and power management features
PCI Express x16 Support
· Supports 4 GB/s (8 GB/s concurrent) bandwidth
· Low power consumption and power management features
Green Function
· Supports ACPI (Advanced Configuration and Power Interface)
· Supports S0 (normal), S1 (power on suspend), S3 (suspend to RAM), S4
(Suspend to disk - depends on OS), and S5 (soft - off)
PDF 文件使用 "pdfFactory" 试用版本创建 Æ Æ www.fineprint.com.cn
Chapter 1 Product Introduction
4
15. FAN2 Connector
16. DDR3 DIMM Slots
17. FDD Connector
18. 24-pin ATX Power Connector
19. DDR2 DIMM Slots
20. CPU_FAN Connector
21. North Bridge: Intel
®
P35 Chipset
22. LGA 775 CPU Socket
23. 8-pin ATX_12V Power Connector
24. FAN1 Connector
25. NB_FAN Connector
26. PCI Express x1 Slots
27. PCI Express x16 Slots
28. PCI Slots
1. Front Audio Connector
2. CD_IN Connector
3. SPDIF-OUT1 Connector(optional)
4. F_1394 Connector(optional)
5. SYS-FAN
6. SPI Connector(optional)
7. Speaker Connector(optional)
8. USB Connectors
9. Front Panel Connector
10. SATA II Connectors
11. CLR-CMOS Jumper
12. South Bridge: Intel
®
ICH9R Chipset
13. IDE Connector:PIDE
14. IR Connector
NOTE:
The above motherboard layout is provided for reference only,
please refer to the physical motherboard.
3
23
11
14
19
5
4
Layout
6
7
2
9
8
10
21
20
22
27
15
12
13
17 18
16
1
28 26 24
25
PDF 文件使用 "pdfFactory" 试用版本创建 ÿ www.fineprint.com.cn
5
Chapter 1 Product Introduction
Rear I/O Ports
This motherboard provides the ports as below:
1394 Port
FDC(Foxconn Digital Connector)
This connector enables connection to Foxconn digital entertainment and
communications products,opening up a world of digital possibilities.
3
1
PS/2 Mouse
Port
2
PS/2
Keyboard Port
S/PDIF
Fiber Port
3
S/PDIF
Coaxial Port
External
SATA Port
5
9
7
Line-out
Microphone
CEN/LFE
Rear Sperker
Side Sperker
Line-in
LAN Port(-K)
8
USB 2.0 Ports
6
FDC
(Foxconn
Digital Connector)
4
10
Line in, Line out, Microphone, Rear, CEN/LEF, Side Jacks
When using 8-channel sound source, connect the front speaker to the green
audio output; connect the rear sound speaker to the black audio output; con-
nect the center speaker/subwoofer to the orange audio output; connect the side
sound speaker to the grey audio output.
7
Warning:
You are only promised to connect Foxconn special product to
FDC(Foxconn Digital Connector) .Connecting any other device to
it may cause serious damage to your motherboard or the device.
Please take care.
PDF 文件使用 "pdfFactory" 试用版本创建 ³ ³ www.fineprint.com.cn
Chapter 1 Product Introduction
6
This chapter introduces the hardware installation process, in-
cluding the installation of the CPU, memory, power supply,
slots, pin headers, and the mounting of jumpers. Caution
should be exercised during the installation of these modules.
Please refer to the motherboard layout prior to any installa-
tion and read the contents in this chapter carefully.
This chapter includes the following information:
v CPU
v Memory
v Power Supply
v Other Connectors
v Expansion Slots
v Jumpers
Chapter
2
2
PDF 文件使用 "pdfFactory" 试用版本创建 × ÿ × www.fineprint.com.cn
Chapter 2 Installation Instructions
7
CPU
This motherboard supports Intel
®
Core
TM
2 Quad,Core
TM
2 Extreme,Core
TM
2 Duo,
Pentium
®
Dual-Core E2xxx,Celeron
®
4xx processors in an LGA775 package with
a Front Side Bus (FSB) of 1333/1066/800MHz.
For the detailed CPU support list on this motherboard, please visit the
website: http://www.foxconnchannel.com
Installation of CPU
Below is the CPU socket illustration. Follow these procedures to install a CPU.
Load lever
Load plate
Protective cover
1. Use thumb and forefinger to hold the hook of the load lever and pull the lever
down and away from socket to unlock it. Lift the load lever.
2. Push down the rear tab with your forefinger to bring the front end of the load
plate up slightly. Open the load plate with thumb. Be careful not to touch the
contacts.
PDF 文件使用 "pdfFactory" 试用版本创建 www.fineprint.com.cn
Chapter 2 Installation Instructions
8
3. Hold CPU with thumb and forefinger. Ensure fingers align to socket cutouts.
Match the CPU triangle marker to Pin 1 position as shown below. The alignment
key also provides the orientation directed function. Lower the CPU straight down
without tilting or sliding the CPU in the socket.
4. After installing the CPU, remove the protective cover from load plate. The
protective cover is used to protect the contacts of the socket. Do not discard the
protective cover. Always replace the socket cover if the CPU is removed from the
socket.
Alignment
Key
Socket
Cutouts
Pin 1
position
PDF 文件使用 "pdfFactory" 试用版本创建 www.fineprint.com.cn
Chapter 2 Installation Instructions
9
5. Close the load plate, and slightly push down the tongue side.
6. Lower the lever and lock it to the load plate, then the CPU is locked completely.
Note :
Excessive temperatures will severely damage the CPU and system.
Therefore you should install the CPU cooling fan and make sure that
it works normally at all times in order to prevent overheating and
damage to the CPU. Please refer to your CPU fan user guide for
correct installation.
This motherboard includes four 240-pin slots with 1.8V for DDR2 and two 240-
pin slots with 1.5V For DDR3 . You must install at least one memory bank to
ensure normal operation.
Memory
PDF 文件使用 "pdfFactory" 试用版本创建 Æ Æ www.fineprint.com.cn
Chapter 2 Installation Instructions
10
Installation of the Memory
1.There is only one gap near the center of the DIMM slot, and the memory
module can be fixed in one direction only. Unlock a DIMM slot by pressing the
module clips outward.
2.Align the memory module to the DIMM slot, and insert the module vertically
into the DIMM slot.
Warning:
Be sure to unplug the AC power supply before adding or removing
expansion cards or other system peripherals, especially the memory
devices, otherwise your motherboard or the system memory might
be seriously damaged.
3.The plastic clips at both sides of the DIMM slot will lock automatically.
96-Pin 144-pin
DDR3
DDR2
112-Pin 128-pin
For the detailed memory support list on this motherboard, please visit the
website: http://www.foxconnchannel.com
Warning:
Do not install DDR2 and DDR3 memory modules simultaneously on
this motherboard. Doing so may result in damage to the motherboard
and your system.
PDF 文件使用 "pdfFactory" 试用版本创建 www.fineprint.com.cn
Chapter 2 Installation Instructions
11
Power Supply
This motherboard uses an ATX power supply. In order to avoid damaging any
devices, make sure that they have been installed properly prior to connecting
the power supply.
24-pin ATX power connector: PWR1
PWR1 is the ATX power supply connector. Make
sure that the power supply cable and pins are
properly aligned with the connector on the
motherboard. Firmly plug the power supply cable
into the connector and make sure it is secure.
8-pin ATX_12 V Power Connector: PWR2
The 8-pin ATX 12V power supply connects to
PWR2 and provides power to the CPU.
13
1
PWR1
+3.3V
GND
+12V
GND
+5V_AUX
+3.3V
+5V
+12V
GND
+5V
+3.3V
PWROK
+3.3V
-12V
NC
+5V
GND
GND
GND
PSON
+5V
GND
GND
+5V
24
12
12V
12V
12V
12V
GND
GND
GND
GND
PWR2
1
48
5
Attention:
We recommend you use 24-pin power supply. If you want to use
20-pin power supply, you need to align the ATX power connector
according to the following picture.
24-Pin Power
20-Pin Power
PDF 文件使用 "pdfFactory" 试用版本创建 ³ ³ www.fineprint.com.cn
Chapter 2 Installation Instructions
12
This motherboard includes connectors for FDD device, IDE device,Serial ATA
devices, USB devices, IR module and others.
FDD Connector: FLOPPY
This motherboard includes a standard FDD connector, supporting 360K, 720K,
1.2M, 1.44M, and 2.88M FDDs.
IDE Connectors: PIDE
This connector support the provided Ultra DMA133/100/66 IDE hard disk ribbon
cable and you can configure as a disk array through RAID controller.
Front Panel Connector: FP1
This motherboard includes one connector
for connecting the front panel switch and
LED indicators.
Hard Disk LED Connector (HDD-LED)
The connector connects to the case’s IDE indicator LED indicating the activity
status of hard disks.
Reset Switch (RESET)
Attach the connector to the Reset switch on the front panel of the case; the
system will restart when the switch is pressed.
Power LED Connector (PLED)
Attach the connector to the power LED on the front panel of the case. The Power
LED indicates the system’s status. When the system is in S0 status, the LED is
on. When the system is in S1 status, the LED is blink; When the system is in S3,
S4, S5 status, the LED is off.
Power Switch Connector (PWRSW)
Attach the connector to the power button of the case. Pushing this switch allows
the system to be turned on and off rather than using the power supply button.
Attention:
If you install only one device on the IDE port such as a hard disk or
a CD _ROM, please configure it as a master device.
Other Connectors
NC
HDD_LED
RESET
PLED
PWRSW
+
-
9
2
FP1!
+
-
Empty
1
10
PDF 文件使用 "pdfFactory" 试用版本创建 www.fineprint.com.cn
Chapter 2 Installation Instructions
13
1394 Connector: F 1394(Optional)
The 1394 expansion cable can be connected
to either the front (provided that the front panel
of your chassis is equipped with the appro-
priate interface) or real panel of the chassis.
USB Connectors: F_USB1/2
In addition to the four USB ports on the rear
panel,the series of motherboards also have two
10-pin connectors on board which may connect
to the front panel USB cable to provide additional
four USB ports.
Warning:
Before installing the USB cables, please pay attention to the marker
of each individual USB cable; make sure to match them with each
USB pin headers correctly, otherwise the USB ports will not work.
Incorrect connection could also damage the motherboard.
Fan Connectors: CPU_FAN,SYS_FAN,FAN1/
2,NB _FAN
There are five fan connectors on this
motherboard.The fan speed can be detected
and viewed in “PC Health Status” section of
the CMOS Setup. These fans will be automati-
cally turned off after the system enters S3, S4
and S5 mode.
FAN1/2,NB-FAN
+12V
GND
SENSE
1
SENSE
GND
CPU_FAN,SYS_FAN
1
POWERCONTROL
Empty
F 1394
TPB+
TPA+
+12V
GND
TPB-
+12V
GND
GND
TPA-
1 2
9 10
F_USB1/2
10 9
VCC
D+
D-
Empty
GND
NC
VCC
GND
D+
2 1
D-
F_AUDIO (HDA)
PORT2_L
SENSE_SEND
PORT1_L
PORT1_R
AUD_GND
PRESENCEJ
PORT2_R
SENSE1_RETURN
Empty
SENSE2_RETURN
1 2
9 10
Audio Connector: F_AUDIO
The audio connector supports HD audio
standard. It provides two kinds of audio output
choices: the Front Audio, the Rear Audio.
PDF 文件使用 "pdfFactory" 试用版本创建 www.fineprint.com.cn
Chapter 2 Installation Instructions
14
Audio Connectors: CD_IN
CD_IN is the Sony standard CD audio connector,
it can be connected to a CD-ROM drive through a
CD audio cable.
Speaker Connector:SPEAKER(Optional)
The speaker connector is used to connect
speaker of the chassis.
IrDA Connector: IR
This header supports wireless transmitting and
receiving device. Before using this founction,con-
figure the settings of CMOS Setup.
Serial ATA II Connectors: SATA_1,SATA_2,
SATA_3,SATA_4,SATA_5,SATA_6
The Serial ATA II connector is used to connect the
Serial ATA II device to the motherboard. These con-
nectors support the thin Serial ATA II cables for
Serial ATA II devices. The current Serial ATA II inter-
face allows up to 300MB/s data transfer rate.
S/PDIF Out Connector:SPDIF-OUT1(Optional)
The SPDIF OUT1 connector is capable of provid-
ing digital audio to external speaker or com-
pressed AC3 data to an external Dolby digital
decoder.
+5V
1
SPKJ
EMPTY
NC
SPEAKER
1
GND
+5V
EMPTY
SPDIF_OUT
SPDIF_OUT1
IR
+5V
GND
IRRX
IRTX
Empty
1
SATA_1/2/3/4/5/6
1
TX+
TX-
RX-
RX+
GND
GND
GND
CD_IN
1
CD_R
GND
CD_L
PDF 文件使用 "pdfFactory" 试用版本创建 www.fineprint.com.cn
/
