VTech mi6885 Quick start guide
- Category
- Telephones
- Type
- Quick start guide
This manual is also suitable for
VTech mi6885 is a versatile cordless phone system with three handsets, each with its own charging cradle. It offers a range of features for convenient communication, including:
- Caller ID: The system displays the caller's phone number and name (if available) on the handset screen before you answer the call.
- Call Waiting: If you're already on a call and someone else tries to reach you, the phone will alert you with a beep. You can then choose to answer the new call or ignore it.
- 3-Way Conferencing: You can have a conversation with two other people at the same time, using one of the handsets as a speakerphone.
VTech mi6885 is a versatile cordless phone system with three handsets, each with its own charging cradle. It offers a range of features for convenient communication, including:
- Caller ID: The system displays the caller's phone number and name (if available) on the handset screen before you answer the call.
- Call Waiting: If you're already on a call and someone else tries to reach you, the phone will alert you with a beep. You can then choose to answer the new call or ignore it.
- 3-Way Conferencing: You can have a conversation with two other people at the same time, using one of the handsets as a speakerphone.
STEP 1 Check package contents
Make sure your phone’s packaging includes the following:
STEP 3 Battery installation
1. Align the two holes in the plug with the socket pins,
then snap the plug into place. Place the battery in the
compartment with the wires in the upper right corner.
2. Replace cover by sliding it upwards until it clicks into
place.
STEP 4 Charge the battery
1. Place the handset in the telephone base/chargers.
2. Chargethebatteryforatleast16hoursbeforerstuse.
Quick start guide
mi6885
STEP 2 Connect power to telephone base/
chargers
Plug the power adapter into an electrical outlet not controlled
by a wall switch, and the connector into the power jack on
bottom of the telephone base/chargers.
NOTE:
• Use only the power adapters supplied with your
VTech telephone.
STEP 5 Connect to phone line
Plug one end of the telephone line cord into the telephone line
jack at the bottom of the telephone base. Then plug the other
end of the cord into the wall telephone outlet.
Power outlet
Telephone outlet
STEP 6 Make, receive and end calls
To make a call
• Press or SPEAKER and listen for dial tone.
STEP 7 Set the clock
1. Press TIME/SET to listen to the current setting.
2. Press TIME/SET again to indicate changes needed.
3. Press CHANGE to change the day, hour, minute, or year.
4. When you hear the correct setting, press TIME/SET to
advance to the next setting.
To hang up
Press OFF, or
place the handse
in its base or
charger.
IMPORTANT!
If your product is not working properly:
1. Refer to your user’s manual.
2. Visit our website at www.vtechphones.com. In Canada go
to www vtechcanada.com.
3. Call our customer service at 1-800-595-9511. In Canada
dial 1-800-267 7377.
NOTE:
If you have caller ID service, the time will automatically
be updated with the first incoming call after you
program the year into the system.
NOTE:
For complete feature instructions, please refer to your
user’s manual.
Power outlet
STEP 8 Record your outgoing announcement
1. Press SETUP, the system announces “Announcement.
Press PLAY or press RECORD. To continue setup, press
SETUP.”
2. Press REC/MEMO and speak toward the MIC on the base
to record an announcement for up to 90 seconds.
3. Press PLAY/STOP /
(whennishedrecording).
• Dial the phone number.
-OR-
• Dial the phone number.
• Press .
Receiving a call
Press , SPEAKERPHONE, or any dialing key, except
OFF.
ENGLISH
Telephone base
Handsets(3)
Telephone line cord
Base power adapter
Quick start guide
Beltclips(3)
User’s manual
Wall mount bracket
Batteries(3)
Chargerpoweradapters(2)
Chargers(2)
96-006193-020-100
-
1
VTech mi6885 Quick start guide
- Category
- Telephones
- Type
- Quick start guide
- This manual is also suitable for
VTech mi6885 is a versatile cordless phone system with three handsets, each with its own charging cradle. It offers a range of features for convenient communication, including:
- Caller ID: The system displays the caller's phone number and name (if available) on the handset screen before you answer the call.
- Call Waiting: If you're already on a call and someone else tries to reach you, the phone will alert you with a beep. You can then choose to answer the new call or ignore it.
- 3-Way Conferencing: You can have a conversation with two other people at the same time, using one of the handsets as a speakerphone.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI